تعارف
The MARANTEC 122459 is a 4-channel handheld remote control designed for operating garage door systems. It utilizes the secure and proven Multi-Bit radio system, developed by Marantec for reliable drive control. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your remote control.
شڪل 1: سامهون view of the MARANTEC 122459 Handheld Remote Control, showing the four control buttons and LED indicator.
پيداوار جون خاصيتون
- 4-چينل ڪنٽرول: Ergonomic design allows operation of up to 4 doors or functions.
- Multi-Bit Wireless System: Features a secure 48-bit encryption with 70 million different transmission codes, ensuring high security.
- Easy Code Learning: Programming is simplified by copying the code from one button to another or via a standard coding plug.
- LED اشارو: A red LED signals button presses and indicates low battery status.
- طاقت جو ذريعو: Powered by a standard CR2032 battery.
- مطابقت: Works with all Marantec motors equipped with bi-linked radio receivers and other drive systems using universal bi-linked receivers.
- لوازمات: Includes a keyring attachment and a wall mount for convenient storage.
- معيار: Manufactured in Germany.
پيڪيج مواد
پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:
- MARANTEC 122459 Handheld Transmitter
- ڀت جبل بریکٹ
- Dowels and Screws for Wall Mount
- CR2032 بيٽري (اڳ ۾ نصب ٿيل يا الڳ)
- استعمال ڪندڙ جو دستياب (ھي دستاويز)
سيٽ اپ ڪريو
1. بيٽري لڳائڻ
The remote control is powered by a CR2032 lithium-manganese dioxide battery. Ensure the battery is correctly installed with the positive (+) side facing up.
شڪل 2: پوئتي view of the remote control, showing the battery compartment. Open the compartment to insert or replace the CR2032 battery.
2. Programming the Remote Control (Code Learning)
The wireless code can be transmitted to the new remote control in two primary ways:
- Copying from an Existing Transmitter: Place the new remote control next to an existing, programmed Marantec Multi-Bit transmitter. Press and hold the desired button on the existing transmitter, then press and hold the corresponding button on the new transmitter. The LED on the new transmitter will indicate successful code transfer (refer to your drive unit's manual for specific LED patterns).
- Using the Standard Coding Plug or Drive Unit: Refer to your Marantec drive unit's instruction manual for detailed steps on how to program a new remote control directly into the drive's receiver. This typically involves pressing a programming button on the drive unit and then a button on the new remote control.
Each motor uses a unique code. If a transmitter is lost, a new code can be programmed for all other devices, rendering the lost transmitter non-functional for security purposes.
3. وال جبل جي انسٽاليشن
The included wall mount allows for convenient storage of your remote control. Choose a suitable location near your garage door or entry point. Use the provided dowels and screws to securely attach the bracket to the wall.
آپريٽنگ هدايتون
1. بنيادي استعمال
To operate your garage door or other programmed function, simply press the corresponding button on the remote control. The red LED will illuminate to confirm the button press and signal transmission.
Figure 3: A hand holding the remote control and pressing one of the four buttons to activate a function.
2. ايل اي ڊي اشاري جي معنيٰ
- سڪل ڳاڙهي روشني: Indicates a successful button press and signal transmission.
- Rapidly Flashing Red Light: Signals that the battery is low and needs to be replaced soon.
سار سنڀال
1. بيٽري مٽائڻ
When the LED indicator flashes rapidly during operation, it is time to replace the CR2032 battery. To replace:
- Open the battery compartment cover on the back of the remote control (refer to Figure 2).
- پراڻي CR2032 بيٽري کي هٽايو.
- هڪ نئين CR2032 بيٽري داخل ڪريو جنهن جو مثبت (+) پاسو مٿي هجي.
- بيٽري جي ڪمري واري ڍڪ کي محفوظ طور تي بند ڪريو.
2. صفائي
Clean the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing يا اندروني جزا.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Remote control does not operate the garage door. | بيٽري گهٽ يا ختم ٿي وئي آهي. | CR2032 جي بيٽري کي تبديل ڪريو. |
| Remote control is not programmed or has lost its code. | Reprogram the remote control following the instructions in the "Programming the Remote Control" section. | |
| ريموٽ ڪنٽرول حد کان ٻاهر آهي. | گيراج جي دروازي جي اوپنر جي ويجهو وڃو. | |
| LED does not light up when a button is pressed. | Battery is completely depleted or incorrectly installed. | Check battery installation or replace the battery. |
| LED flashes rapidly when a button is pressed. | بيٽري گهٽ آهي. | CR2032 جي بيٽري کي تبديل ڪريو. |
وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | 122459 |
| چينل | 4 |
| طول و عرض (L x W x H) | 86 x 39 x 12 ملي ميٽر |
| وزن | 40 گرام |
| رنگ | ڀورو |
| مواد | پلاسٽڪ |
| بيٽري جو قسم | CR2032 Lithium-Manganese Dioxide |
| ٺاهيندڙ | مارانٽيڪ |
| اصل جو ملڪ | جرمني |
حفاظت جي ڄاڻ
- Keep remote controls out of reach of children to prevent accidental operation of the garage door.
- Do not allow children to play with the remote control or the garage door opener.
- گيراج جو دروازو صرف تڏهن هلايو جڏهن اهو مڪمل طور تي ڀريل هجي. view ۽ رڪاوٽن کان پاڪ.
- Never walk or drive through a moving garage door.
- مقامي ضابطن جي مطابق استعمال ٿيل بيٽرين کي ختم ڪريو.
- Do not expose the remote control to water or extreme temperatures.
وارنٽي ۽ سپورٽ
For warranty information or technical support, please refer to the documentation provided with your garage door opener system or contact Marantec customer service directly. Specific warranty details for the remote control are typically covered under the main drive unit's warranty.
