Millenium MCT-10 Cable Tester User Manual

1. تعارف

The Millenium MCT-10 Cable Tester is a versatile and essential tool designed for quickly and accurately testing various audio and data cables. It supports a wide range of connector types, including XLR, TRS Jack, Phono, DIN, and SpeakON, making it ideal for musicians, audio engineers, and IT professionals. This manual provides detailed instructions on the setup, operation, maintenance, and troubleshooting of your MCT-10 Cable Tester.

2. حفاظت جي ڄاڻ

مھرباني ڪري ڊوائيس هلائڻ کان اڳ سڀ حفاظتي ھدايتون پڙھو ۽ سمجھو. مستقبل جي حوالي لاءِ ھي دستورالعمل رکو.

• ڊوائيس کي پاڻي يا گهڻي نمي جي سامهون نه رکو.
• ڊوائيس کي مضبوط اثرن لاءِ ڇڏڻ يا تابع ڪرڻ کان پاسو ڪريو.
• ڊوائيس کي کولڻ يا تبديل ڪرڻ جي ڪوشش نه ڪريو. سڀني سروسنگ کي قابل اهلڪارن جي حوالي ڪريو.
• صرف مخصوص بيٽري جو قسم استعمال ڪريو ۽ انسٽاليشن دوران صحيح پولارٽي کي يقيني بڻايو.
• جيڪڏهن ڊوائيس گهڻي عرصي تائين استعمال نه ٿيندي ته بيٽريون هٽايو.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• Millenium MCT-10 Cable Tester unit
• Two test leads with banana plugs and alligator clips (red and black)
• استعمال ڪندڙ جو دستياب (ھي دستاويز)

Figure 3.1: Millenium MCT-10 Cable Tester with its two included test leads.

4. پراڊڪٽ ختمview

The MCT-10 features a robust design with multiple input/output ports and intuitive indicators for efficient cable testing.

Figure 4.1: Top panel layout of the MCT-10 Cable Tester.

4.1. ڪنٽرول ۽ اشارا

• روٽري سوئچ: Selects the pin to be tested (1-5).
• LED Indicators (1-5): Illuminate to show corresponding pins connected.
• گرائونڊ LED: Illuminates to indicate a connection (short circuit) from a pin to the shell/ground.
• Battery Check LED: Illuminates when the rotary switch is fully clockwise, indicating a charged battery.

4.2. ڪنيڪٽرن جا قسم

The MCT-10 supports the following connector types for testing:

• XLR: Male and Female (3-pin)
• TRS Jack: 6.35mm (1/4 انچ)
• Phono (RCA): Standard RCA connectors
• دين: 3-pin, 5-pin, 7-pin, 8-pin (MIDI, etc.)
• SpeakON: 4-قطب
• Banana Jacks: For continuity testing with included leads.

5. سيٽ اپ

5.1. بيٽري لڳائڻ

The MCT-10 requires a 9V battery (not included) for operation. The battery compartment is located on the bottom of the unit.

1. يونٽ جي تري ۾ بيٽري جي ڪمپارٽمينٽ ڪَوَر کي ڳوليو.
2. Lift the cover to withdraw it.
3. Connect a 9V battery to the battery clip, ensuring correct polarity (+ to + and - to -).
4. Place the battery into the compartment and replace the cover, ensuring it clicks securely into place.

Figure 5.1: Battery compartment on the underside of the MCT-10.

6. آپريٽنگ هدايتون

The MCT-10 allows for comprehensive testing of various cable types. Always ensure the cable is disconnected from all equipment before testing.

6.1. Standard Cable Testing (XLR, TRS, Phono, DIN, SpeakON)

1. Connect one end of the cable to be tested into the corresponding input port on one side of the MCT-10.
2. Connect the other end of the cable into the corresponding output port on the opposite side of the MCT-10. For example, an XLR male connector into the XLR female port, and an XLR female connector into the XLR male port.
3. Rotate the rotary switch clockwise, cycling through pins 1 to 5.
4. Observe the LED indicators:
   • A pair of LEDs (e.g., '1' on the left and '1' on the right) will illuminate simultaneously if the corresponding pins are connected correctly.
   • If a pin is short-circuited to the shell/ground, the "Ground" LED will illuminate along with the corresponding pin LED.
   • If an LED does not illuminate for a specific pin, it indicates an open circuit (broken wire) for that pin.
   • If unexpected LEDs illuminate, it indicates a short circuit between pins.

Figure 6.1: MCT-10 in operation, testing a cable.

6.2. Continuity Testing with Banana Jacks

The MCT-10 can also be used as a basic continuity tester for individual wires or components using the included test leads.

1. Insert the banana plugs of the red and black test leads into the corresponding banana jacks on the MCT-10.
2. Touch the alligator clips to the two points you wish to test for continuity.
3. If there is continuity (a complete circuit), the "Battery Check" LED will illuminate, and an audible beeper will sound.

6.3. Battery Check Function

To check the battery level of the MCT-10:

1. Rotate the rotary switch fully clockwise to the "Battery Check" position.
2. If the "Battery Check" LED illuminates brightly, the battery has sufficient charge. If it is dim or does not illuminate, the battery needs to be replaced.

7. سار سنڀال

7.1. صفائي

Clean the exterior of the MCT-10 with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.

7.2. اسٽوريج

Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the battery to prevent leakage.

7.3. بيٽري مٽائڻ

Replace the 9V battery when the "Battery Check" LED appears dim or does not illuminate during the battery check function, or if the unit fails to power on. Refer to Section 5.1 for battery installation instructions.

8. مسئلا حل ڪرڻ

If you encounter issues with your MCT-10 Cable Tester, refer to the following table for common problems and solutions:

9. وضاحتون

10. وارنٽي ڄاڻ

The Millenium MCT-10 Cable Tester comes with a manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official Millenium webسائيٽ تي وڃو يا پنهنجي خريداري واري هنڌ سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

11. ڪسٽمر سپورٽ

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Millenium customer support. Contact information can typically be found on the official Millenium webسائيٽ تي يا پراڊڪٽ پيڪنگنگ تي.