ACEMIC GT-5 وائرليس مائڪروفون سسٽم يوزر مينوئل

1. تعارف

The ACEMIC GT-5 is a portable digital wireless microphone system designed for instruments, particularly electric blowpipes, and stage performances. It features digital audio transmission, 16 selectable frequencies, and a digital ID code to prevent interference. This manual provides detailed instructions for setting up, operating, and maintaining your GT-5 system.

شڪل 1.1: The ACEMIC GT-5 wireless microphone system, showing the transmitter (left) and the receiver (right). The transmitter features a 6.35mm plug, while the receiver has controls for power and frequency synchronization.

2. پيڪيج مواد

مھرباني ڪري پيڪيج جي مواد کي چيڪ ڪريو ته جيئن پڪ ڪري سگھجي ته سڀئي شيون موجود آھن:

• GT-5 Wireless Transmitter
• GT-5 Wireless Receiver
• Battery (Note: While the product specifications list a battery as an included component, some descriptions indicate it may not be included. Please verify upon receipt.)

3. اهم خاصيتون

• Digital wireless audio transmission for clear sound.
• Pre-set 16 selectable frequencies to avoid interference.
• Digital ID code technology for robust signal integrity.
• Operating range of up to 40 meters (line-of-sight).
• Suitable for electric blowpipe, stagاي پرفارمنس، ۽ اسٽريٽ پرفارمنس.
• Portable plug-on receiver, directly connects to mixers or active speakers.
• Lithium battery power supply for extended use.

4. سيٽ اپ جون هدايتون

4.1. بيٽرين کي چارج ڪرڻ

Both the transmitter and receiver are powered by 3.7V lithium batteries. Ensure both units are fully charged before first use. Connect the appropriate charging cables (not specified in product details, assume standard USB charging) to a power source.

4.2. وصول ڪندڙ کي ڳنڍڻ

1. Identify the receiver unit. It features a 6.35mm (1/4 inch) plug.
2. Plug the receiver directly into the 6.35mm input jack of your mixer, amplifier, or active speaker. The receiver's plug can swivel for optimal positioning.

شڪل 4.2.1: The GT-5 receiver connected to a mixer, demonstrating its plug-and-play functionality.

شڪل 4.2.2: Detail of the receiver's swivel plug, allowing for flexible connection angles.

4.3. Powering On and Synchronization

1. Turn on the receiver by pressing its power button. The display should illuminate.
2. Turn on the transmitter by pressing its power button.
3. The system uses IR sync to download the frequency from the receiver to the transmitter. Ensure both units are in close proximity (within a few inches) and facing each other's IR windows (if present, otherwise ensure general proximity).
4. Press the "SYNC" button on the receiver (or follow specific synchronization instructions if provided with the physical product) to initiate frequency pairing. The RF indicator on both units should show a stable connection once synchronized.
5. If interference occurs, you can change the frequency. The system offers 16 selectable channels. Refer to the operating section for frequency adjustment.

شڪل 4.3.1: The GT-5 transmitter attached to an electric blowpipe, ready for use.

5. آپريٽنگ هدايتون

5.1. مائڪروفون استعمال ڪندي

Once the transmitter and receiver are synchronized, the system is ready for use. The transmitter is designed to be attached to an instrument, such as an electric blowpipe.

• Ensure the microphone is positioned correctly to capture the instrument's sound effectively.
• Monitor the audio output from your mixer/speaker to adjust volume levels as needed.
• Maintain a line-of-sight operating range of up to 40 meters between the transmitter and receiver for optimal signal quality. Obstacles can reduce this range.

5.2. Changing Frequencies

If you experience interference or need to operate multiple GT-5 systems simultaneously, you can change the operating frequency.

1. On the receiver, use the channel selection buttons (usually labeled CHR or similar, or up/down arrows) to cycle through the 16 available frequencies.
2. After selecting a new frequency on the receiver, perform the IR synchronization process again (as described in Section 4.3) to pair the transmitter with the new frequency.

6. سار سنڀال

• صفائي: ٽرانسميٽر ۽ رسيور جي ٻاهرين حصي کي صاف ڪرڻ لاءِ نرم، سڪل ڪپڙو استعمال ڪريو. مائع صاف ڪندڙ يا سالوينٽس استعمال نه ڪريو.
• اسٽوريج: جڏهن استعمال ۾ نه هجي، سسٽم کي ٿڌي، سڪل جڳهه ۾ ذخيرو ڪريو، سڌو سج جي روشني ۽ انتهائي گرمي پد کان پري.
• بيٽري جي سنڀال: For optimal battery life, avoid fully discharging the batteries frequently. If storing for extended periods, charge the batteries to approximately 50% every few months.
• نمي کان بچڻ: Protect the units from water and excessive humidity.

7. مسئلا حل ڪرڻ

8. وضاحتون

General System Specifications:

• تعدد جي حد: Region dependent
• آڊيو ٽرانسميشن: Digital wireless
• آڊيو ايسampلنگ موڊ: 48KHz
• چونڊيل تعدد: 16 pre-set channels
• سڃاڻپ ڪوڊ: Digital ID code for interference prevention
• آپريٽنگ رينج: 40 ميٽر تائين (نظر جي لڪير)
• بجلي جي فراهمي: 3.7V Lithium battery (for both units)

وصول ڪندڙ جي وضاحت:

• موڊوليشن موڊ: pi/4 DQPSK
• دير: <6ms
• تعدد جواب: 60Hz - 15KHz ± 2dB
• مجموعي هارمونڪ تحريف: <0.8% (1KHz)
• سگنل/شور جو تناسب: >92dB
• وصول ڪرڻ واري حساسيت: -92dBm
• پيداوار: 6.35mm پلگ
• مسلسل استعمال: > 6 ڪلاڪ
• طول و عرض: 185 x 20 x 10 ملي ميٽر

ٽرانسميٽر جي وضاحت:

• موڊوليشن موڊ: pi/4 DQPSK
• ٽرانسميٽر پاور: 10 ميگاواٽ
• حساسيت: -47 ڊي بي ± 2 ڊي بي
• Frequency Change: IR sync
• مائڪروفون جو قسم: ڪنسنسر
• مائڪرو فون جي ماپ: Φ14 x 5.0mm
• مسلسل استعمال: > 6 ڪلاڪ
• طول و عرض: 125 x 40 x 20 ملي ميٽر

9. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the documentation provided with your purchase or contact ACEMIC customer service directly. Keep your proof of purchase for warranty claims.