آر سي ايف آرٽ 935-اي ڊجيٽل 2-وے ايڪٽو اسپيڪر يوزر مينوئل

1. تعارف ۽ اوورview

The RCF ART 935-A is a high-performance digital 2-way active speaker designed for intensive audio applications. It combines advanced transducer technology with a powerful amplifier to deliver exceptional sound quality and versatility.

شڪل 1.1: سامهون view of the RCF ART 935-A active speaker, showcasing its robust black enclosure and front grille.

اهم خاصيتون شامل آهن:

• Up to 133 dB Sound Pressure Level
• 2100W Class-D Bi-Ampificationنڻ
• 45-20000 Hz linear frequency response
• 3" Titanium/Neodymium Compression Driver
• 15" Woofer
• FiRPHASE zero degrees phase technology
• Bass Motion Control woofer excursion management

Figure 1.2: Close-up of the speaker's internal components, highlighting the 15-inch woofer and the 3-inch compression driver.

The ART 935-A is suitable for use as a stand-alone FOH system speaker, satellite with a subwoofer, stage monitor, or flown installation, offering high performance and reliability in a compact enclosure.

2. حفاظت جي ڄاڻ

Please read and understand all safety instructions before operating the RCF ART 935-A speaker. Retain this manual for future reference.

• برقي حفاظت: هن يونٽ ۾ هاءِ وولٽ شامل آهيtage. To prevent electrical shock, do not remove the cover. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• طاقت جو ذريعو: Connect the speaker only to a power supply of the type described in this manual and marked on the unit.
• پاور ڪنڊ: بجليءَ جي تار کي هلڻ يا پنچ ٿيڻ کان بچايو، خاص طور تي پلگ، سهولتن جي رسيپٽيڪل ۽ ان نقطي تي جتي اهي سامان مان نڪرندا آهن.
• وينٽيليشن: اسپيڪر جي چوڌاري مناسب هوا جي وهڪري کي يقيني بڻايو. ڪنهن به هوا جي وهڪري جي سوراخن کي نه روڪيو.
• لڳائڻ: Place the speaker on a stable, level surface or mount it securely using appropriate rigging hardware. Avoid placing near heat sources or in direct sunlight.
• ٻڌڻ جي حفاظت: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating the speaker at high volumes.
• نمي: Do not expose the speaker to rain or moisture. Do not use near water.

⚠ CAUTION: TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE COVER.

3. سيٽ اپ

Follow these steps to set up your RCF ART 935-A speaker:

3.1 کولڻ

Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage during transit. The box should contain: RCF ART 935-A Digital 2-Way Active Speaker, Power Cord, and this User Manual.

3.2 جسماني جڳهه ۽ چڙهڻ

The ART 935-A is designed for versatile placement. It can be used on a pole, flown, wall-mounted, or truss-mounted. Ensure any mounting hardware used is rated for the speaker's weight (approximately 53.2 pounds / 24.2 kg).

شڪل 3.1: پاسي view of the speaker, illustrating its ergonomic design for handling and placement.

شڪل 3.2: هيٺيون view, highlighting the integrated pole mount for stand placement.

3.3 ڪنيڪشن

Locate the input/output panel on the rear of the speaker.

Figure 3.3: Rear panel of the speaker, displaying the balanced input/link, volume control, and preset buttons.

• پاور ڪنيڪشن: Connect the supplied power cord to the AC inlet on the rear panel and then to a suitable power outlet.
• آڊيو ان پٽ: Use an XLR cable to connect your audio source (mixer, audio interface, etc.) to the "BALANCED INPUT/LINK" XLR input.
• Audio Link (Daisy Chain): If connecting multiple speakers, use an XLR cable from the "BALANCED INPUT/LINK" XLR output to the input of the next speaker.

4. آپريٽنگ هدايتون

Once the speaker is set up, you can begin operation.

شڪل 4.1: تفصيلي view of the control panel, including the volume control and preset selection.

4.1 ڪنٽرول ۽ اشارا

• وولم نوب: Adjusts the overall output level of the speaker. Turn counter-clockwise for minimum volume (-∞) and clockwise for maximum volume (MAX).
• PRESETS Button: Cycles through different audio equalization presets.
  • لڪير: Flat frequency response, suitable for general use or when external EQ is applied.
  • بوسٽ: Enhances bass and treble frequencies, often used for music playback.
  • STAGE: Optimized for stage monitor applications, reducing low-frequency build-up.
• سگنل LED: Illuminates when an audio signal is present at the input.
• OVERLOAD LED: Illuminates when the input signal is too high, indicating potential clipping. Reduce the input level to prevent distortion.

4.2 پاور آن/آف

1. Ensure the VOLUME knob is set to minimum (-∞).
2. پاور ڪنڊ کي ڳنڍيو.
3. پاور سوئچ کي "آن" پوزيشن ڏانهن ڦيرايو.
4. Gradually increase the VOLUME to the desired level.
5. To power off, reduce the VOLUME to minimum, then flip the power switch to "OFF".

5. سار سنڀال

Proper maintenance ensures the longevity and optimal performance of your RCF ART 935-A speaker.

• صفائي: Use a soft, dry cloth to clean the exterior of the speaker. Do not use abrasive cleaners, solvents, or waxes. For the grille, a soft brush or vacuum cleaner can be used to remove dust.
• چڪاس: Periodically check all cables for damage. Ensure all connections are secure.
• اسٽوريج: When not in use for extended periods, store the speaker in a dry, cool environment, ideally in its original packaging or a protective case.
• ڪوبه استعمال ڪندڙ قابل خدمت حصا: Do not attempt to open the speaker enclosure. All internal servicing must be performed by qualified RCF service personnel.

6. مسئلا حل ڪرڻ

If you encounter issues with your RCF ART 935-A speaker, refer to the following common problems and solutions:

For issues not listed here, or if the problem persists after attempting the solutions, please contact RCF customer support or an authorized service center.

7. وضاحتون

Detailed technical specifications for the RCF ART 935-A Digital 2-Way Active Speaker:

8. وارنٽي ۽ سپورٽ

The RCF ART 935-A Digital 2-Way Active Speaker comes with a RCF 3 Year Limited Warranty. مھرباني ڪري وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

For technical support, service, or warranty inquiries, please contact RCF customer service or visit the official RCF website. Ensure you have your product model number (ART935-A) and serial number (if applicable, e.g., UDXU01335) ready when contacting support.

The serial number UDXU01335 is located on the rear panel of the speaker, near the input/output connections.