فاسٽرڪ اسٽريٽ ويئر 2.0 اينالاگ-ڊجيٽل واچ ماڊل 38068PP01 يوزر مينوئل

1. پراڊڪٽ ختمview

The Fastrack Streetwear 2.0 Analog-Digital Watch combines classic analog timekeeping with modern digital functions, offering versatility and durability. It features a robust design suitable for daily wear and various activities.

شڪل 1.1: سامهون view of the Fastrack Streetwear 2.0 Analog-Digital Watch, displaying the digital time, day of the week, and various function indicators. The watch features four control buttons on its sides.

بٽڻ افعال

• SET Button (Top Left): Used to enter and confirm settings.
• موڊ بٽڻ (هيٺ کاٻي پاسي): Cycles through different operational modes (Time, Alarm, Chronograph, Timer, Second Time Zone).
• ADJ Button (Top Right): Used to adjust values during setting.
• LIGHT Button (Bottom Right): Activates the EL backlight for illumination.

2. سيٽ اپ

2.1 شروعاتي چڪاس

Upon unboxing, inspect the watch for any visible damage. Ensure all buttons are functioning correctly by pressing them gently. The watch comes with a pre-installed Lithium Polymer battery.

2.2 Setting Time and Date (Digital Display)

1. عام وقت جي ڊسپلي موڊ ۾، دٻايو موڊ button repeatedly until the digital display shows the time setting screen (often indicated by flashing digits).
2. کي دٻايو سيٽ button to select the digit or setting you wish to adjust (e.g., seconds, hour, minute, year, month, day). The selected segment will flash.
3. استعمال ڪريو اي ڊي جي button to increase the value. Hold the اي ڊي جي button for faster adjustment.
4. دٻائڻ جاري رکو سيٽ to cycle through all settings (seconds, hour, minute, 12/24 hour format, year, month, day).
5. هڪ دفعو سڀئي سيٽنگون صحيح ٿي وڃن، دٻايو موڊ button to exit the setting mode and return to normal time display.

2.3 Setting Analog Time

The analog hands are typically set independently. Refer to the crown on the side of the watch (if present) or specific instructions for analog adjustment. For this model, the analog time is usually synchronized with the digital time or set manually via a crown. If a crown is present, pull it out and rotate to set the analog hands, then push it back in.

2.4 12/24 ڪلاڪ فارميٽ

During the digital time setting process (Step 2.2), you will encounter an option to switch between 12-hour (with AM/PM indicator) and 24-hour formats. Use the اي ڊي جي button to toggle between these options.

3. آپريٽنگ هدايتون

3.1 موڊ نيويگيشن

کي دٻايو موڊ button to cycle through the watch's various functions in the following order:

• عام وقت ڊسپلي
• ڪرنوگراف (اسٽاپ واچ)
• الارم سيٽنگ
• ٽائمر
• ٻئي دفعي جو علائقو

3.2 Chronograph Function

The chronograph measures elapsed time with lap operation.

1. دٻايو موڊ until 'CHRONO' or 'STW' appears on the digital display.
2. دٻايو اي ڊي جي chronograph شروع ڪرڻ لاء.
3. دٻايو اي ڊي جي ٻيهر chronograph کي روڪڻ لاء.
4. To record a lap time while the chronograph is running, press سيٽ. The lap time will display briefly, and the chronograph will continue running in the background.
5. To reset the chronograph to zero, ensure it is stopped, then press سيٽ.

3.3 Alarm Function and Hourlيار چيم

The watch features an alarm with a buzzer signal and an hourlيار چيم.

1. دٻايو موڊ until 'ALARM' appears on the digital display.
2. دٻايو سيٽ to enter alarm setting mode. The hour digits will flash.
3. استعمال ڪريو اي ڊي جي گهربل الارم ڪلاڪ مقرر ڪرڻ لاء.
4. دٻايو سيٽ to move to the minute digits and use اي ڊي جي مطلوب الارم منٽ مقرر ڪرڻ لاء.
5. دٻايو موڊ الارم سيٽنگ مان نڪرڻ لاءِ.
6. To activate/deactivate the alarm or hourly chime, in alarm mode, press اي ڊي جي to toggle these features on or off. Indicators on the display will show their status.

3.4 ٽائمر فنڪشن

The timer allows for a countdown from a set time.

1. دٻايو موڊ until 'TIMER' or 'TMR' appears on the digital display.
2. دٻايو سيٽ to enter timer setting mode. The hour digits will flash.
3. استعمال ڪريو اي ڊي جي to set the desired countdown hour.
4. دٻايو سيٽ to move to the minute digits and use اي ڊي جي to set the desired countdown minute.
5. دٻايو سيٽ to move to the second digits and use اي ڊي جي to set the desired countdown second.
6. دٻايو موڊ to exit timer setting.
7. ٽائمر کي شروع ڪرڻ لاء، دٻايو اي ڊي جي.
8. To pause/resume the timer, press اي ڊي جي ٻيهر.
9. To reset the timer to its initial set time, ensure it is stopped, then press سيٽ.

3.5 Second Time Zone

This function allows you to keep track of time in another time zone.

1. دٻايو موڊ until 'T2' or 'DUAL TIME' appears on the digital display.
2. دٻايو سيٽ to enter second time zone setting mode. The hour digits will flash.
3. استعمال ڪريو اي ڊي جي to set the desired hour for the second time zone.
4. دٻايو سيٽ to move to the minute digits and use اي ڊي جي to set the desired minute.
5. دٻايو موڊ to exit second time zone setting.

3.6 EL Backlight

To illuminate the digital display in low-light conditions, press the روشني button (bottom right). The backlight will activate for a few seconds.

شڪل 3.1: The watch display with its green EL backlight activated, enhancing visibility in dark environments.

4. سار سنڀال

4.1 صفائي

پنهنجي گھڙي کي صاف ڪرڻ لاءِ، ان کي نرم، سڪل ڪپڙي سان نرميءَ سان صاف ڪريو. ضدي مٽيءَ لاءِ، ٿورو ڊيamp cloth can be used, followed by immediate drying. Avoid using chemical cleaners, solvents, or abrasive materials, as these can damage the watch's finish and seals.

4.2 پاڻي جي مزاحمت جون هدايتون

This watch is rated for 100 meters (10 ATM) water resistance. This means it is suitable for swimming, snorkeling, and showering. However, it is نه suitable for scuba diving or high-impact water sports. Avoid operating buttons while the watch is submerged in water to prevent water ingress.

شڪل 4.1: ريڙهه view of the watch, showing the stainless steel back case with 'WR100M' engraving, indicating 100-meter water resistance.

4.3 بيٽري جي ڄاڻ

The watch is powered by 1 Lithium Polymer battery, which is included. When the display becomes dim or functions become erratic, it may be time for a battery replacement. It is recommended to have battery replacement performed by a qualified watch technician to ensure the water resistance seal is properly maintained.

5. مسئلا حل ڪرڻ

5.1 Digital Display is Blank or Dim

• ممڪن سبب: گھٽ بيٽري.
• حل: بيٽري کي تبديل ڪريو.

5.2 غلط وقت جي ڊسپلي

• ممڪن سبب: وقت صحيح طرح سان مقرر نه ٿيو آهي يا حادثاتي طور تي ترتيب ڏنل آهي.
• حل: Re-set the digital and analog time as per Section 2.2 and 2.3.

5.3 Buttons Not Responding

• ممڪن سبب: واچ بند ٿيل موڊ ۾ هجي يا اندروني خرابي هجي.
• حل: Try pressing all buttons firmly. If unresponsive, a battery replacement might resolve the issue. If the problem persists, contact customer support.

5.4 Water Inside the Watch

• ممڪن سبب: Water resistance compromised due to damage, improper sealing after battery change, or buttons operated underwater.
• حل: Immediately take the watch to a professional watch repair service. Do not attempt to open the watch yourself.

6. وضاحتون

7. وارنٽي ۽ سپورٽ

For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official Fastrack webسائيٽ. ڪنهن به وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.