1. تعارف
This manual provides essential information for the installation, operation, and maintenance of your Sygonix SY-4760956 Embedded RFID Code Keypad. This device is designed to provide secure access control using PIN codes, RFID cards, or a combination of both. Please read this manual thoroughly before installation and use to ensure proper function and safety.
اهم خاصيتون:
- Wiegand input and output for use as a controller or Wiegand reader.
- IP66 compliant for outdoor installation and weather resistance.
- Multiple access modes: PIN, RFID card, or PIN + RFID card.
- Supports up to 1000 access authorizations (990 permanent users, 10 guest users).
- Integrated Photoresistor (LDR) with anti-tamper function for enhanced security.
- Durable anti-vandal metal housing.
2. حفاظت جي ڄاڻ
ڊوائيس کي زخم يا نقصان کان بچڻ لاءِ هيٺ ڏنل حفاظتي احتياطن تي عمل ڪريو:
- مقامي اليڪٽريڪل ڪوڊس جي مطابق، انسٽاليشن قابل اهلڪارن پاران ڪئي وڃي.
- ڪنهن به انسٽاليشن يا وائرنگ جي ڪم کان اڳ پڪ ڪريو ته بجلي جي فراهمي بند ٿيل آهي.
- صرف مخصوص وولٽ استعمال ڪريوtage (12V/DC to 18V/DC).
- Do not expose the device to extreme temperatures, humidity, or corrosive environments beyond its IP66 rating.
- Do not attempt to disassemble or modify the device. This will void the warranty and may cause damage or injury.
- پيڪنگنگ مواد ٻارن کان پري رکو.
3. پراڊڪٽ ختمview ۽ اجزاء
Familiarize yourself with the keypad and its included components.
تصوير 3.1: سامهون view of the Sygonix SY-4760956 RFID Code Keypad alongside its embedded mounting box. The keypad features a numeric input panel and an indicator light.
تصوير 3.2: All components included with the Sygonix SY-4760956 keypad: the keypad unit, embedded mounting box, mounting screws, wall anchors, a diode, a hex key, and a master card for programming.
3.1 Keypad Unit
- ڪيپاد: Numeric keys (0-9), asterisk (*), and hash (#) for PIN entry and programming.
- روشني اشارو: Provides visual feedback on status (e.g., access granted, access denied, programming mode).
- آر ايف آءِ ڊي ريڊر: Integrated for card-based access.
3.2 چڙهڻ وارو دٻو
The embedded mounting box is designed for flush installation, providing a secure and discreet fit.
3.3 وائرنگ هارنس
A multi-colored wiring harness extends from the rear of the keypad for power, lock control, and Wiegand connections.
تصوير 3.3: ريڙهه view of the keypad, illustrating the sealed electronics and the multi-colored wiring harness for connection to power and access control systems.
4. سيٽ اپ ۽ تنصيب
The Sygonix SY-4760956 is designed for screw-mounted, embedded installation. It can be installed outdoors due to its IP66 rating.
4.1 ڪي پيڊ لڳائڻ
- چڙهڻ واري جڳھ کي تيار ڪريو: Choose a suitable location for embedded installation. Ensure there is enough space behind the wall or surface for the mounting box and wiring.
- افتتاح کي ڪٽ ڪريو: Carefully cut an opening in the wall or surface according to the dimensions of the embedded mounting box (approximately 2.5 x 7 x 11.5 cm).
- Secure the Mounting Box: Insert the mounting box into the prepared opening and secure it using appropriate fasteners.
- Attach the Keypad: Connect the wiring harness (see Section 4.2) and then secure the keypad unit to the mounting box using the provided screws.
4.2 وائرنگ ڪنيڪشن
The keypad requires a 12V/DC to 18V/DC power supply. The multi-colored wires from the keypad harness must be connected to your access control system and power supply. Refer to the wiring diagram provided with your specific access control system for detailed connections. Common connections include:
- طاقت: Connect to a stable 12V/DC or 18V/DC power source.
- تالا ڪنٽرول: Wires for connecting to an electric lock (e.g., NO/NC contacts).
- Wiegand Data: Wiegand 26-bit or 34-bit output for integration with external access controllers.
- الارم / ٽيamper: Connections for anti-tamper switch and alarm output.
نوٽ: The length of the connection wires may vary. Ensure all connections are secure and insulated to prevent short circuits.
5. آپريٽنگ هدايتون
The keypad supports various access methods and programming functions.
5.1 Initial Setup and Master Card
- Upon first power-up, the keypad is in a default state.
- Present the included ماسٽر ڪارڊ to the keypad to enter programming mode. The indicator light will change, and an audible signal may sound.
- Follow the specific programming steps in your full instruction manual (if provided) to set up administrator PINs and register user cards/PINs.
5.2 يوزر مينيجمينٽ
The system allows for 1000 total access authorizations:
- 990 Permanent Users: For regular access via PIN or RFID card.
- 10 Guest Users: For temporary access, which can be easily added or removed.
Refer to the detailed programming guide for adding, deleting, and modifying user PINs and RFID cards.
5.3 Accessing the Controlled Area
- PIN Access: Enter your assigned PIN code followed by the '#' key.
- آر ايف آءِ ڊي ڪارڊ تائين رسائي: Present your registered RFID card to the keypad.
- PIN + RFID Card Access: Present your registered RFID card, then enter your assigned PIN code followed by the '#' key.
Upon successful authentication, the indicator light will typically turn green, and the lock will disengage for a preset duration. An audible signal will confirm access.
5.4 Anti-Tamper فنڪشن
The integrated LDR (Photoresistor) detects attempts to tamper with the device. If tampering is detected, an alarm may be triggered, and the system may enter a lockout state. This feature enhances security against unauthorized physical interference.
6. سار سنڀال
The Sygonix SY-4760956 keypad is designed for durability and requires minimal maintenance.
- صفائي: ڪي پيڊ جي مٿاڇري کي نرم، ڊي سان صاف ڪريوamp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- چڪاس: Periodically check the keypad for any signs of physical damage or loose connections. Ensure the mounting screws are tight.
- ماحولياتي تحفظ: While IP66 rated, avoid directing high-pressure water jets directly at the keypad.
7. مسئلا حل ڪرڻ
If you encounter issues with your keypad, refer to the following common problems and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Keypad is unresponsive / No power | No power supply; Incorrect wiring; Faulty power adapter. | Check power connections and ensure correct voltage (12-18V/DC). Verify wiring according to the diagram. Test power adapter. |
| Access denied with correct PIN/Card | PIN/Card not registered; Incorrect access mode selected; Keypad in lockout mode. | Ensure the PIN/Card is correctly registered. Verify the access mode (PIN, Card, or PIN+Card). Check if the anti-tamper alarm has been triggered. |
| Lock does not open after successful authentication | Lock wiring issue; Faulty lock; Incorrect lock type setting. | Check the wiring between the keypad and the lock. Test the lock independently. Verify the lock type (NO/NC) setting in the keypad's programming. |
| Keypad beeps continuously or alarm sounds | Tamper alarm triggered; Incorrect programming. | Inspect the keypad for signs of tampering. Refer to the programming guide to reset the alarm or adjust tamper sensitivity. |
جيڪڏهن انهن حلن جي ڪوشش ڪرڻ کان پوءِ به مسئلو برقرار رهي، مهرباني ڪري ڪسٽمر سپورٽ سان رابطو ڪريو.
8. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ٺاهيندڙ | سيگونڪس |
| ماڊل نمبر | SY-4760956 |
| طول و عرض (L x W x H) | 2.5 x 7 x 11.5 سينٽي (0.98 x 2.76 x 4.53 انچ) |
| وزن | 209 گرام (0.46 پائونڊ) |
| رنگ | ڪارو / چاندي |
| بجلي جي فراهمي | Wired (Cable électrique) |
| جلدtage | 12V/DC - 18V/DC |
| انسٽاليشن جو طريقو | Screw-mounted, Embedded |
| رابطي ٽيڪنالاجي | Wired (Wiegand input/output) |
| IP جي درجه بندي | IP66 (Dust tight and protected against powerful water jets) |
| Access Capacity | 1000 users (990 permanent, 10 guest) |
| انتباہ جو قسم | صرف آڊيو |
| ڪنٽرول جو طريقو | بٽڻ دٻايو |
9. وارنٽي ۽ سپورٽ
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Sygonix products are designed for reliability and performance.
If you require technical assistance or have questions not covered in this manual, please contact Sygonix customer support or your authorized dealer. When contacting support, please have your product model number (SY-4760956) and purchase details available.
