XTOOL D8W وائرليس OBD2 تشخيصي اسڪينر استعمال ڪندڙ دستياب

1. تعارف

The XTOOL D8W is an advanced wireless OBD2 diagnostic scanner designed for comprehensive vehicle analysis and maintenance. This device offers a wide range of functions including full system diagnostics, bidirectional controls, ECU coding, and numerous special service functions. It features a wireless VCI for stable and fast data transfer, supporting modern vehicle protocols like CANFD and DoIP, and includes FCA AutoAuth capabilities.

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your XTOOL D8W diagnostic tool to ensure optimal performance and accurate vehicle diagnostics.

Figure 1: XTOOL D8W Diagnostic Scanner and Components.

2. سيٽ اپ

2.1 پيڪيج مواد

پڪ ڪريو ته سڀئي جزا پيڪيج ۾ موجود آهن:

• XTOOL D8W ٽيبليٽ
• Wireless VCI (Vehicle Communication Interface)
• چارج ڪيبل
• استعمال ڪندڙ جو دستياب (ھي دستاويز)
• کڻڻ وارو ڪيس

2.2 شروعاتي پاور آن ۽ چارجنگ

The XTOOL D8W tablet is equipped with a built-in Lithium Ion battery. Before first use, ensure the device is fully charged. Connect the charging cable to the tablet and a power source. The charging indicator will illuminate.

2.3 Connecting the Wireless VCI

The D8W utilizes a wireless VCI for communication with the vehicle. This VCI connects to the vehicle's OBD2 port and communicates with the tablet via Wi-Fi.

1. گاڏي جي OBD2 پورٽ کي ڳوليو، عام طور تي ڊرائيور جي پاسي ڊيش بورڊ جي هيٺان.
2. Plug the wireless VCI securely into the OBD2 port. The VCI's indicator light will show a successful connection.
3. On the D8W tablet, ensure Wi-Fi is enabled. The tablet will automatically detect and connect to the VCI. This wireless connection offers a range of up to 66 feet and data transfer speeds up to 64 Mbps.

Figure 2: Wireless VCI connection process.

2.4 سافٽ ويئر اپڊيٽ

The XTOOL D8W includes 3 years of free software updates. Regular updates ensure compatibility with new vehicle models and access to the latest diagnostic functions.

• Connect the tablet to a stable internet connection (Wi-Fi).
• Navigate to the "Updates" section on the tablet's main menu.
• دستياب اپڊيٽس کي ڊائون لوڊ ۽ انسٽال ڪرڻ لاءِ اسڪرين تي ڏنل هدايتن تي عمل ڪريو.

2.5 ٻولي سيٽنگون

The device supports over 23 languages. To change the language:

• Go to "Settings" on the main menu.
• Select "Language" and choose your preferred language.
• If your desired language is not listed or requires activation, contact XTOOL support with your device's serial number.

Figure 3: Multilingual support interface.

3. Operating the XTOOL D8W

3.1 Vehicle Connection and Identification

After connecting the VCI to the vehicle's OBD2 port and ensuring a wireless connection to the tablet:

• Select "Diagnosis" from the main menu.
• ڊوائيس سپورٽ ڪري ٿو AutoVIN for automatic vehicle identification and خودڪار اسڪين to scan all available Electronic Control Units (ECUs).
• Alternatively, you can manually select the vehicle make, model, and year.

3.2 مڪمل سسٽم تشخيص

The D8W performs dealer-level diagnostics across all available vehicle systems, including Engine, ABS, SRS, Transmission, HVAC, TPMS, and more.

• ڊي ٽي سي پڙهو: Retrieve diagnostic trouble codes from all systems.
• DTCs صاف ڪريو: Erase stored trouble codes after repairs.
• لائيو ڊيٽا: View real-time data streams from various sensors and components.
• فيض جو فريم: Capture a snapshot of vehicle conditions when a DTC was set.
• ECU ڄاڻ: Display detailed information about the vehicle's ECUs.

شڪل 4: ختمview of OE-level all systems diagnostics.

3.3 ٽوپولوجي ميپنگ

The Topology Mapping feature provides a visual representation of the vehicle's communication network, showing the status of each module and simplifying fault detection.

• Access Topology Mapping from the main diagnosis screen.
• Modules are displayed with color-coded indicators for their status (e.g., green for normal, red for fault).
• ڪنهن به ماڊيول تي ڪلڪ ڪريو view specific details or DTCs.

Figure 5: Topology Map capability for visual fault identification.

3.4 Bidirectional Controls (Active Tests)

Perform active tests to command vehicle components to perform specific functions, aiding in troubleshooting and component verification. The D8W supports over 4000 active tests.

• Examples include testing A/C clutch engagement, operating mirrors, wipers, sunroof, fuel pumps, and various valves.
• Navigate to "Active Tests" within the diagnostic menu for the relevant system.
• Follow on-screen instructions to perform tests safely.

Figure 6: Bidirectional controls interface for active component testing.

3.5 Special Functions (42+ Resets/Adaptations)

The D8W offers a wide array of special service functions for maintenance and repair tasks. These functions vary by vehicle make and model.

• عام ڪمن ۾ شامل آهن: Oil Light Reset, Throttle Relearn, Electronic Parking Brake (EPB) Reset, Steering Angle Sensor (SAS) Calibration, Gearbox Match, Battery Management System (BMS) Reset, Injector Coding, Diesel Particulate Filter (DPF) Regeneration, Crank Sensor Relearn, Tire Pressure Monitoring System (TPMS) Reset, Power Balance, Tire Size Reset, Air/Fuel (A/F) Reset, Headlight Adjustment, Coolant Bleeding, Suspension Calibration, Seat Match, ECU Configurations, ABS Bleeding, Stop/Start Reset, Language Change, Control Unit Reset, Rain/Light Sensor Calibration, A/C Relearn, HV Battery Diagnostics, VGT Relearn, FRM Reset, SRS (Airbag) Reset, Clutch Adaptation.
• Access these functions via the "Special Function" menu.
• نوٽ: Compatibility for specific functions varies by vehicle. Always verify compatibility before proceeding.

شڪل 7: مثالamples of advanced maintenance selections.

3.6 ECU Coding and Configuration

The D8W supports advanced ECU Coding for certain vehicle brands (e.g., Benz, BMW, Mitsubishi). This allows for customization of vehicle settings and activation of hidden functions.

• Follow the guided procedures carefully. Incorrect coding can lead to vehicle malfunctions.
• The device also supports Programmable Module Installation (PMI) for Ford, Lincoln, and Mazda vehicles, enabling data transfer to new modules during replacement.

Figure 8: Online ECU Coding interface.

Figure 9: Programmable Module Installation (PMI) in progress.

3.7 Live Data Graphing and Recording

Monitor up to 8 live data parameters simultaneously with graphical display. Data can be recorded, played back, and exported as a CSV file تفصيلي تجزيو لاءِ.

Figure 10: Live data recording and graphing interface.

3.8 پري-اسڪين ۽ پوسٽ-اسڪين افعال

Utilize the Pre-Scan function to identify potential issues and DTCs before repairs. After repairs, perform a Post-Scan to confirm all issues are resolved and validate vehicle performance.

Figure 11: Pre-Scan and Post-Scan diagnostic results.

3.9 Diagnostic Report 2.0

Generate comprehensive and customizable diagnostic reports (V2.0) that can be saved or emailed. These reports provide a clear overview of vehicle health and diagnostic findings.

شڪل 12: مثالample of Diagnostic Report 2.0.

3.10 FCA AutoAuth

The D8W supports FCA AutoAuth for accessing protected modules in 2018+ Chrysler, Jeep, Dodge, and 2017+ Fiat vehicles. This requires an active AutoAuth account.

• Follow the on-screen prompts to log in with your AutoAuth credentials when prompted.
• نوٽ: FCA support is primarily for North America. For other regions, an XTOOL 12+8 adapter may be required.

Figure 13: FCA AutoAuth login interface.

4. سار سنڀال

4.1 سافٽ ويئر اپڊيٽ

Regularly check for and install software updates as described in Section 2.4. This ensures your device has the latest vehicle coverage and diagnostic capabilities.

4.2 ڊوائيس کي صاف ڪرڻ

نرم استعمال ڪريو، ڊيamp cloth to clean the tablet screen and body. Avoid abrasive cleaners or solvents that could damage the device. Ensure the VCI is free of debris before connecting to the OBD2 port.

4.3 بيٽري جي سنڀال

بيٽري جي زندگي کي وڌائڻ لاءِ، ڊوائيس کي بار بار مڪمل طور تي چارج ڪرڻ کان پاسو ڪريو. جڏهن ڊگهي عرصي تائين استعمال ۾ نه هجي ته ڊوائيس کي ٿڌي، سڪل جاءِ تي رکو.

5. مسئلا حل ڪرڻ

For issues not listed here, please refer to the support section or contact XTOOL technical support.

6. وضاحتون

7. وارنٽي ۽ سپورٽ

7.1 وارنٽي ڄاڻ

XTOOL D8W هڪ سان گڏ اچي ٿو 24-month brand warranty خريداري جي تاريخ کان، عام استعمال هيٺ پيداوار جي خرابين ۽ خرابين کي ڍڪيندي.

Additionally, the device includes 3 سال مفت سافٽ ويئر اپڊيٽس. After the initial 3 years, you can continue to use the last updated functions even without renewal.

7.2 ٽيڪنيڪل سپورٽ

XTOOL provides حياتياتي ٽيڪنيڪل سپورٽ for the D8W. If you encounter any issues or require assistance, please contact our support team.

• اي ميل سپورٽ: xtoolofficial@hotmail.com (as indicated in product information)
• Support is available 24/7/365.
• When contacting support, please provide your device's serial number (S/N) for faster service.

شڪل 14: ختمview of warranty and support benefits.