1. تعارف
This manual provides instructions for the installation, operation, and maintenance of your Sena Parani M10 Bluetooth Motorcycle Headset. The Parani M10 allows for seamless communication and entertainment while riding, featuring Bluetooth intercom capabilities and smartphone connectivity for music, GPS, and calls. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. پيڪيج مواد
The Parani M10 package typically includes the following components:
- Parani M10 Main Unit
- وائرڊ بوم مائڪروفون
- Speakers (pair)
- هيلمٽ ڪلamp کٽ
- USB چارجنگ ڪيبل
- اسپيڪر پيڊ
- ٿلهو ۽ لوپ فاسٽنرز لاء ڳالهائيندڙ
- استعمال ڪندڙ جو دستياب (ھي دستاويز)
Figure 2.1: Parani M10 complete kit showing the main unit, wired microphone, and speakers.
3. پراڊڪٽ ختمview
Familiarize yourself with the main unit's components and controls.
Figure 3.1: Parani M10 Main Unit Controls and Ports.
- جوگ ڊائل: Used for volume control, menu navigation, and various functions.
- ملٽي فنڪشن بٽڻ: Primary button for power, pairing, and call management.
- LCD ڊسپلي: Shows battery status, volume level, intercom pairing status, and other operational information.
- ڊي سي پاور چارجنگ ۽ فرم ويئر اپ گريڊ پورٽ: For charging the device and updating its firmware.
- Speakers and Microphone Port: Connection point for the wired speakers and microphone.
4. سيٽ اپ ۽ تنصيب
The Parani M10 is designed for easy installation on most motorcycle helmets.
4.1 Attaching the Main Unit to the Helmet
- ڪل لاءِ پنهنجي هيلمٽ جي کاٻي پاسي هڪ مناسب جڳهه چونڊيوamp کٽ
- هيلمٽ جي پيچ کي کوليو.amp kit and slide it between the helmet shell and the inner padding. Ensure it is securely fastened.
- Slide the Parani M10 main unit onto the clamp جيستائين ان جي جاء تي ڪلڪ ڪريو.
Figure 4.1: Parani M10 unit installed on a helmet.
4.2 اسپيڪر ۽ مائڪروفون لڳائڻ
- Attach the hook and loop fasteners to the inside of your helmet, aligning them with your ears.
- Press the speakers onto the fasteners. Ensure the speakers are positioned directly over your ears for optimal audio quality.
- Attach the wired boom microphone to the inside of the helmet, positioning it close to your mouth but not directly in front of it to avoid wind noise.
- Route the speaker and microphone wires neatly under the helmet padding to the main unit's port.
- Connect the speaker/microphone cable to the corresponding port on the Parani M10 main unit.
4.3 ڊوائيس چارج ڪرڻ
Before first use, fully charge the Parani M10. Connect the USB charging cable to the DC Power Charging Port on the main unit and to a USB power source. The LCD display will indicate charging status.
5. آپريٽنگ هدايتون
5.1 پاور آن/آف
- پاور آن: 1 سيڪنڊ لاءِ ملٽي فنڪشن بٽڻ کي دٻايو ۽ رکو.
- بجلي بند: 5 سيڪنڊن لاءِ ملٽي فنڪشن بٽڻ کي د andايو ۽ رکو.
5.2 حجم ڪنٽرول
Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume. The LCD display will show the current volume level.
Figure 5.1: LCD display showing pairing status and volume.
5.3 اسمارٽ فون جوڙڻ
- With the M10 powered off, press and hold the Multi-function Button for 5 seconds until the LED flashes red and blue, indicating pairing mode.
- پنهنجي اسمارٽ فون تي، بلوٽوٿ سيٽنگز ڏانهن وڃو ۽ نوان ڊوائيسز ڳوليو.
- Select "Parani M10" from the list of available devices.
- Once paired, the LED will flash blue, and the LCD will confirm connection.
- You can now listen to music, GPS navigation, and make/receive phone calls through your headset.
5.4 بلوٽوٽ انٽرڪام
The Parani M10 supports intercom communication with up to four other Parani users on its dedicated Bluetooth intercom network.
- Pairing Intercom:
- Ensure both M10 units are powered on.
- On one M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- On the second M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- The units will automatically search and pair. Once paired, the LED will flash blue.
- Repeat this process for additional units (up to four total).
- Starting/Ending Intercom Conversation:
- To start an intercom conversation, tap the Jog Dial.
- To end an intercom conversation, tap the Jog Dial again.
5.5 فون ڪالز
- جواب ڏيو ڪال: ٽيپ ڪريو ملٽي فنڪشن بٽڻ.
- ڪال ختم ڪريو: ٽيپ ڪريو ملٽي فنڪشن بٽڻ.
- ڪال رد ڪريو: 2 سيڪنڊن لاءِ ملٽي فنڪشن بٽڻ کي د andايو ۽ رکو.
- وائس ڊائل: In standby mode, press and hold the Multi-function Button for 3 seconds. (Requires smartphone support for voice commands).
6. سار سنڀال
6.1 صفائي
هڪ نرم سان مکيه يونٽ مسح ڪريو، ڊيamp cloth. Do not use harsh chemicals or solvents. Ensure all ports are dry before charging or use.
6.2 بيٽري جي سنڀال
- بيٽري جي صحت کي برقرار رکڻ لاءِ، ڊوائيس کي باقاعدي چارج ڪريو، جيتوڻيڪ استعمال ۾ نه هجي.
- ڊوائيس کي انتهائي گرمي پد ۾ رکڻ کان پاسو ڪريو.
- Do not attempt to replace the internal battery yourself. Contact Sena support for battery service.
6.3 فرم ویئر تازه ڪاريون
وقت بوقت سينا چيڪ ڪريو website for firmware updates. Updating the firmware can improve performance and add new features. Connect the device to your computer using the USB cable and follow the instructions provided by Sena's Device Manager software.
7. مسئلا حل ڪرڻ
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ڊوائيس تي طاقت نه آهي. | گھٽ بيٽري. | ڊوائيس مڪمل طور تي چارج ڪريو. |
| اسمارٽ فون سان جوڙو نه ٿو ٺاهي سگهجي. | Device not in pairing mode; smartphone Bluetooth off; interference. | Ensure M10 is in pairing mode (red/blue flashing LED). Turn smartphone Bluetooth off and on. Move away from other Bluetooth devices. |
| انٽرڪام ڳنڍجي نه رهيو آهي. | Units not in intercom pairing mode; out of range; already connected to other devices. | Ensure both M10 units are in intercom pairing mode. Reduce distance between units. Disconnect from other Bluetooth devices before intercom pairing. |
| اسپيڪرن مان ڪو به آڊيو ناهي. | Volume too low; speakers not connected properly; faulty speakers. | Increase volume using the Jog Dial. Check speaker connections. Test with another audio source if possible. |
| مائڪروفون ڪم نه ڪري رهيو آهي. | Microphone not connected properly; faulty microphone. | Check microphone connection to the main unit. Ensure microphone is positioned correctly. |
7.1 فيڪٽري ري سيٽ
If issues persist, a factory reset may resolve them. To perform a factory reset, press and hold the Multi-function Button and the Jog Dial simultaneously for 10 seconds. The device will reset to its default settings.
8. وضاحتون
| ماڊل نالو | پرواني M10 |
| بلوٽوت ورزن | بلوٽوٿ 5.1 |
| انٽرڪام رينج | Up to 1 km (0.6 miles) in open terrain |
| Max Intercom Users | 4 (Parani-only network) |
| ڳالهائڻ جو وقت | 16 ڪلاڪ تائين |
| چارج ڪرڻ وقت | لڳ ڀڳ 2.5 ڪلاڪ |
| آپريٽنگ جي درجه حرارت | -10 ° C کان 55 ° C (14 ° F کان 131 ° F) |
| وزن | لڳ ڀڳ. 60 گرام (2.1 اوز) |
Note: Specifications are subject to change without notice. Actual performance may vary based on environmental conditions and usage.
9. وارنٽي ۽ سپورٽ
9.1 وارنٽي ڄاڻ
Sena products are covered by a limited warranty from the date of purchase. For detailed warranty terms and conditions, please refer to the official Sena webسائيٽ يا توهان جي پراڊڪٽ سان گڏ وارنٽي ڪارڊ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
9.2 ڪسٽمر سپورٽ
ٽيڪنيڪل مدد، مسئلو حل ڪرڻ، يا عام پڇا ڳاڇا لاءِ، مھرباني ڪري سرڪاري سينا جو دورو ڪريو website for support resources, FAQs, and contact information. You can also reach out to your local dealer for assistance.
- سينا Webسائيٽ: www.sena.com
- پرواني Webسائيٽ: www.parani.com
