ايزي ٿريڊ ڪي 3 3 ڊي پرنٽر يوزر مينوئل

1. تعارف

The EasyThreed K3 is a compact and user-friendly FDM (Fused Deposition Modeling) 3D printer designed for both beginners and experienced users. It features an integrated structure for easy assembly, a silent motherboard for quiet operation, and a magnetic heated build plate for improved print adhesion and easy model removal. This manual provides comprehensive instructions for setting up, operating, and maintaining your K3 3D printer to ensure optimal performance and longevity.

2. حفاظتي هدايتون

• پرنٽر کي هميشه سٺي هوادار علائقي ۾ هلايو.
• پرنٽر کي ٻرندڙ مواد ۽ گرمي جي ذريعن کان پري رکو.
• آپريشن دوران گرم نوزل ​​يا گرم ٿيل بستري کي نه ڇهو. هٿ ڪرڻ کان اڳ حصن کي ٿڌو ٿيڻ ڏيو.
• پڪ ڪريو ته بجلي جي فراهمي صحيح طرح سان ڳنڍيل ۽ گرائونڊ ٿيل آهي.
• آپريشن دوران ٻارن ۽ پالتو جانورن کي پرنٽر کان پري رکو.
• ڪنهن به سار سنڀال يا صفائي ڪرڻ کان اڳ پرنٽر کي پاور آئوٽليٽ مان ان پلگ ڪريو.

3. پيڪيج مواد

Upon unpacking your EasyThreed K3 3D printer, please verify that all the following components are included:

• EasyThreed K3 3D Printer (partially assembled)
• پاور اڊاپٽر
• USB ڪيبل
• TF Card (with pre-loaded models and software)
• Filament (10M PLA sampلي)
• Tools for assembly and maintenance
• استعمال ڪندڙ جو دستياب (ھي دستاويز)

4. پراڊڪٽ ختمview

Familiarize yourself with the main components of your EasyThreed K3 3D printer.

شڪل 4.1: سامهون view of the EasyThreed K3 3D Printer with a sample print. This image shows the overall design, including the print head, build plate, and control panel.

Figure 4.2: Dimensions of the EasyThreed K3 3D Printer. The image indicates a width of 290mm, depth of 340mm, and height of 330mm, with a build volume of 150x150x150mm.

5. سيٽ اپ

5.1 اسيمبلي

The EasyThreed K3 comes with an integrated structure and is semi-assembled, making the setup process quick and straightforward. Follow the included visual guide or video instructions (if provided on the TF card) for detailed assembly steps. Typically, this involves attaching the gantry to the base and connecting a few cables.

5.2 شروعاتي پاور آن

1. Connect the power adapter to the printer and a suitable power outlet.
2. Turn on the power switch, usually located at the back or side of the printer.
3. The printer's display (if available) should light up, indicating it is ready for operation.

5.3 فليمينٽ لوڊ ڪرڻ

1. Ensure the nozzle is heated to the appropriate temperature for PLA (180-230°C).
2. Insert the filament into the filament sensor (if present) and then into the extruder's intake hole.
3. Push the filament through until it exits the nozzle. You may need to manually extrude a small amount to ensure it flows smoothly and is free of air bubbles.

6. آپريٽنگ هدايتون

6.1 ڇپائيءَ لاءِ ماڊل تيار ڪرڻ (ڪٽڻ)

Before printing, a 3D model (typically an STL file) needs to be converted into G-code, which the printer understands. This process is called "slicing" and is done using slicing software (e.g., Cura, PrusaSlicer). The included TF card may contain a compatible slicing software or a link to download it.

• Install the slicing software on your computer.
• Load your 3D model (.stl, .obj, etc.) into the software.
• Configure print settings such as layer height, infill density, print speed, and support structures. Refer to the software's documentation for detailed explanations of each setting.
• جي-ڪوڊ ٺاهڻ لاءِ ماڊل کي ٽڪرو ڪريو. file.
• جي ڪوڊ محفوظ ڪريو file TF ڪارڊ ڏانهن.

6.2 پرنٽ شروع ڪرڻ

1. Insert the TF card containing the G-code file into the printer's TF card slot.
2. Navigate the printer's menu (using the control buttons) to select the desired G-code file.
3. Confirm your selection to start the print. The printer will begin heating the nozzle and build plate, then proceed with printing.

6.3 ڪنيڪشن

The EasyThreed K3 supports printing via TF card and USB connection. For USB printing, connect the printer to your computer and use the slicing software's direct print function or a dedicated host software.

7. سار سنڀال

7.1 باقاعده صفائي

• پليٽ فارم: After each print, remove any residual filament or debris from the magnetic build plate. Clean with isopropyl alcohol if necessary to ensure good adhesion for future prints.
• نوزل: Periodically clean the exterior of the nozzle with a brass brush while it is warm to remove any plastic buildup.
• پرنٽر فريم: Wipe down the printer frame and rails with a soft, dry cloth to remove dust and filament particles.

7.2 نوزل ​​جي سار سنڀال

If you experience clogs or poor extrusion, the nozzle may need cleaning or replacement. Use the provided needle or a thin wire to clear any blockages while the nozzle is hot. For persistent issues, consider replacing the nozzle.

7.3 Filament Storage

Store filament in a cool, dry place, ideally in a sealed container with desiccant. PLA can absorb moisture from the air, leading to print quality issues like popping sounds during extrusion or brittle filament.

8. مسئلا حل ڪرڻ

9. وضاحتون

10. وارنٽي ۽ سپورٽ

All EasyThreed 3D printers come with a 12-مهيني وارنٽي ۽ حياتياتي ٽيڪنيڪل سپورٽ. If you encounter any issues or have questions regarding your K3 3D printer, please do not hesitate to contact the manufacturer's customer support. Refer to the product packaging or official webرابطي جي تفصيل لاءِ سائيٽ.