1. تعارف
The AUTOOL BT250 Automotive Circuit Tester is a versatile diagnostic tool designed for testing electrical systems in various vehicles. It provides comprehensive testing capabilities for voltage, polarity, continuity, signal circuits, bad ground contacts, and short/open circuits. This manual provides detailed instructions for the proper use, maintenance, and troubleshooting of your BT250 tester.
Image 1.1: The AUTOOL BT250 Automotive Circuit Tester, including the main unit, power cables with alligator clips, and auxiliary ground clamp.
2. حفاظت جي ڄاڻ
Always observe the following safety precautions when using the AUTOOL BT250:
- مناسب اکين جي حفاظت پائڻ.
- Do not use the tester on voltages exceeding 70V AC/DC.
- بند جڳهن ۾ ڪم ڪرڻ وقت مناسب هوا جي وهڪري کي يقيني بڻايو وڃي.
- هلندڙ انجڻ جي حصن سان رابطي کان پاسو ڪريو.
- The tester is equipped with circuit overload protection. If the current exceeds 10A, the tester will automatically disconnect to prevent damage.
- Keep the tester away from water and extreme temperatures.
Image 2.1: The BT250 features overload protection, automatically disconnecting if current exceeds 10A to safeguard the circuit.
3. پراڊڪٽ ختمview
The BT250 is designed for ease of use and durability. Familiarize yourself with its main components:
Image 3.1: Labeled diagram of the BT250 showing the probe tip, light, LCD display, auxiliary ground clamp, mode button, sound/radiator button, power switch, and power cable.
- تحقيق جي صلاح: For making contact with circuits.
- روشني: Built-in flashlight for illuminating work areas.
- LCD ڊسپلي: ڏيکاري ٿو جلدtage, resistance, diode test results, and menu options.
- Clamps: Red and black alligator clips for connecting to vehicle battery.
- Auxiliary Ground Clamp: For additional grounding when needed.
- موڊ بٽڻ: Cycles through different testing modes (Voltage, Resistance, Diode Test, Audio Tone).
- Sound / Radiator Button: Activates sound alerts or component activation.
- پاور سوئچ: On/Off switch for the device.
- Power Cable (1.5m): Connects the tester to the vehicle's power source.
4. سيٽ اپ
Before using the BT250, ensure it is properly connected to a power source:
- Connect the red alligator clip to the positive (+) terminal of a 12V or 24V vehicle battery.
- Connect the black alligator clip to the negative (-) terminal of the vehicle battery or a good chassis ground.
- Turn on the power switch on the BT250. The device will perform a quick self-test.
- The LCD display will show the voltage, and a beep sound will confirm it's ready for use.
Image 4.1: Illustrated steps for connecting the BT250 to a 12V power supply and performing a quick self-test.
5. آپريٽنگ هدايتون
The AUTOOL BT250 supports various testing modes to diagnose automotive electrical systems. Use the Mode Button to cycle through the available functions.
5.1. جلدtage Test (DC/AC)
This mode allows you to measure DC and AC voltage سرڪٽ ۾.
- منتخب ڪريو Voltage mode on the tester.
- Touch the probe tip to the circuit point you wish to test.
- The LCD display will show the voltage reading. For DC voltage, the screen color indicates polarity (Red for positive, Green for negative). For AC voltage, it displays max/min voltage, frequency, and duty cycle.
Image 5.1.1: Demonstrating DC and AC voltage testing with the BT250.
تصوير 5.1.2: اڳوڻيample of DC voltage reading on the LCD display.
تصوير 5.1.3: اڳوڻيampاي سي وول جو ليtage reading showing waveform, max/min, frequency, and duty cycle.
5.2. مزاحمتي ٽيسٽ
Measure the resistance between the probe tip and the auxiliary ground.
- Select the Resistance mode.
- Connect the auxiliary ground clamp to a known good ground.
- Touch the probe tip to the component or circuit point. The resistance value will be displayed.
Image 5.2.1: Performing a resistance test on a component.
تصوير 5.2.2: اڳوڻيample of resistance reading on the LCD display.
5.3. ڊيوڊ ٽيسٽ
Quickly test the operation of diode assemblies and determine if they are conducting properly.
- Select the Diode Test mode.
- Touch the probe tip to one end of the diode and the auxiliary ground clamp to the other. The display will show the voltagاي ڊاءِڊ تي اڇلايو.
Image 5.3.1: Performing a diode test on a component.
تصوير 5.3.2: اڳوڻيample of diode test reading on the LCD display.
5.4. جزو چالو ڪرڻ
The BT250 can activate components in your hands or in the vehicle, such as radiator fans, starter motors, relays, and window regulators.
- Connect the tester to the vehicle's battery.
- Touch the probe tip to the positive terminal of the component you wish to activate.
- Press the Sound/Radiator button to supply power to the component.
Image 5.4.1: Activating an electronic component using the BT250 tester.
5.5. ٽارچ فنڪشن
The built-in flashlight illuminates your work area, especially useful in dark environments.
- The flashlight automatically activates when the tester is powered on and connected to the battery.
Image 5.5.1: The BT250's integrated LED light for improved visibility in dark conditions.
5.6. گھڻ-ٻولي سپورٽ
The BT250 supports multiple languages for user convenience.
- Navigate to the language settings via the Mode Button.
- Select your preferred language from the list (English, Russian, German, Spanish, French, Italian, Portuguese).
Image 5.6.1: The BT250's display showing the available language options.
5.7. هدايتي وڊيو
Watch this official video for a visual guide on using the AUTOOL BT250 for various tests.
Video 5.7.1: Official demonstration of the AUTOOL BT250's features, including DC/AC testing, resistance, diode test, flashlight, and multi-language function.
6. سار سنڀال
To ensure the longevity and optimal performance of your AUTOOL BT250:
- Clean the tester regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- ڊوائيس کي سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري ٿڌي، سڪل جاءِ تي رکو.
- Inspect the cables and connectors for any signs of wear or damage before each use.
- Ensure the probe tip is clean and free of debris for accurate readings.
7. مسئلا حل ڪرڻ
If you encounter issues with your BT250, refer to the following common problems and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ٽيسٽر پاور آن نٿو ٿئي. | Incorrect battery connection; Dead vehicle battery; Faulty power cable. | Ensure alligator clips are securely connected to the correct battery terminals. Check vehicle battery voltage. Inspect power cable for damage. |
| غلط پڙھڻ. | Poor contact with circuit; Dirty probe tip; Incorrect mode selected. | Ensure firm contact with the circuit. Clean the probe tip. Verify the correct testing mode is selected. |
| Overload protection activates frequently. | Attempting to draw too much current; Short circuit in the tested component. | Ensure the component's current draw is within the tester's limits (10A). Check the component for short circuits before testing. |
8. وضاحتون
Key technical specifications for the AUTOOL BT250:
Image 8.1: Detailed specifications for the BT250, including voltage ranges, resistance, and circuit breaker current.
- ڊي سي جلدtagاي ماپ جي حد: 0-70V
- AC جلدtagاي ماپ جي حد: 0-70V
- Resistance Measurement Range: 0-200 ڪلوΩ
- Circuit Breaker Current: 10 Amp
- ٻاهرين بجلي جي فراهمي: 12V or 24V Battery
- آپريٽنگ گرمي پد: 32-140°F (0-60°C)
- طول و عرض: 9.37 x 4.88 x 2.2 انچ
- وزن: 14.18 اونس
9. وارنٽي ۽ سپورٽ
AUTOOL provides a three-year warranty for the BT250. If you encounter any defects or require technical assistance, please contact AUTOOL customer support. We are committed to providing prompt solutions and lifetime technical support.
For support, please visit the official AUTOOL store or contact their customer service directly. Response is typically within 24 hours.
