ايميزون بيسڪس 9 انچ ٿرمل ليمينيٽر مشين يوزر مينوئل

1. کانview

The Amazon Basics 9-inch Thermal Laminator Machine is designed for laminating documents and photos up to 9 inches wide, accommodating legal and letter-sized paper, as well as smaller items. It features two heat settings for various pouch thicknesses and a quick warm-up time, making it ideal for home, office, or school use.

Figure 1: Amazon Basics 9-inch Thermal Laminator Machine. This image shows the laminator from a slight angle, with a document being fed through it, highlighting its compact design and ease of use.

2. اهم خاصيتون

• Thermal laminator for documents up to 9 inches wide.
• Accommodates legal and letter-sized paper, photos, and more.
• Compatible with any 3 mil or 5 mil laminating pouch.
• Two heat settings: 3 mil (for normal documents, photos, card stock) and 5 mil (for thinner papers).
• Quick 3-5 minute warm-up with a ready indicator light.
• Jam release lever for easily clearing paper jams.
• Compact dimensions: approximately 13.9 x 2.6 x 4.4 inches (LxWxH).
• Supports laminating paper thickness range of 50-160g at 3mil and 50-100g at 5mil.

3. سيٽ اپ

1. Unpack the Laminator: Carefully remove the laminator and any included accessories from the packaging.
2. هڪ مستحڪم سطح تي جاء: Position the laminator on a flat, stable, and heat-resistant surface, ensuring adequate ventilation around the unit.
3. پاور Connectنيو: بجلي جي تار کي معياري برقي آئوٽليٽ ۾ لڳايو.
4. گرمي سيٽنگ چونڊيو: Locate the power switch and heat setting selector on the side of the laminator. Choose either "3 mil" or "5 mil" based on the thickness of your laminating pouches.
   

   Figure 2: Close-up of the power switch and heat setting selector. This image highlights the switch for selecting between 3 mil and 5 mil pouch thickness.
5. پاور آن: Turn the laminator on. The red "On" indicator light will illuminate.
6. Wait for Warm-up: Allow 3-5 minutes for the laminator to warm up. The green "Ready" indicator light will illuminate when the machine has reached the optimal laminating temperature. Do not attempt to use the laminator before the green light is on.

4. آپريٽنگ هدايتون

1. دستاويز تيار ڪريو: پنهنجي دستاويز يا تصوير کي ليمينيٽنگ پائوچ اندر رکو، پڪ ڪريو ته اهو وچ ۾ هجي ۽ ڪنارن جي چوڌاري هڪجهڙائي واري سرحد هجي.
2. پائوچ داخل ڪريو: With the sealed edge of the pouch first, carefully insert the laminating pouch into the laminator's entry slot. Ensure the pouch is fed straight and evenly.
   

   Figure 3: A person carefully feeding a document enclosed in a laminating pouch into the machine's entry slot. This demonstrates the correct orientation for feeding documents.
3. Lamination Process: The laminator will automatically pull the pouch through. Do not pull or push the pouch during the lamination process.
4. Retrieve Laminated Item: Once the pouch exits the machine completely, carefully remove the laminated item. It may be warm, so handle with care.
5. ٿڌي ڪريو: Allow the laminated item to cool and set on a flat surface for a few minutes before trimming or handling extensively.
6. جام صاف ڪرڻ: In case of a paper jam, immediately push and hold the jam release lever located on the side of the machine while gently pulling the pouch out of the entry slot. Release the lever once the pouch is clear.

شڪل 4: مٿي کان هيٺ view of the laminator showing various size guides (letter, 4x6, card) and the Amazon Basics logo. This image helps users align different sized documents.

5. سار سنڀال

• صفائي: صفائي ڪرڻ کان اڳ پڪ ڪريو ته ليمينيٽر پلگ ان ٿيل آهي ۽ مڪمل طور تي ٿڌو آهي. ٻاهرين حصي کي نرم، ڊي سان صاف ڪريو.amp ڪپڙو. استعمال نه ڪريو abrasive cleaners يا solvents.
• رولر صفائي: Periodically run a cleaning sheet (available separately) through the laminator to remove any adhesive residue from the rollers.
• اسٽوريج: Store the laminator in a cool, dry place away from direct sunlight and moisture. Ensure the power cord is neatly wrapped and not kinked.

6. مسئلا حل ڪرڻ

• Laminator Not Heating Up:
  • پڪ ڪريو ته پاور ڪنڊ محفوظ طور تي ڪم ڪندڙ آئوٽليٽ ۾ پلگ ان ٿيل آهي.
  • Verify the power switch is in the "On" position and the correct mil setting (3 mil or 5 mil) is selected.
  • Allow sufficient time (3-5 minutes) for the machine to warm up until the green "Ready" light illuminates.
• پيپر جام:
  • Immediately push and hold the jam release lever.
  • Gently pull the jammed pouch out of the entry slot.
  • Ensure pouches are fed straight and not at an angle.
  • Do not use pouches that are too thick for the selected mil setting.
• Poor Lamination Quality (Bubbles, Wrinkles):
  • Ensure the laminator has fully warmed up (green "Ready" light is on).
  • Verify the correct mil setting is selected for your pouch thickness.
  • Ensure the document is centered properly within the pouch and the pouch is fed straight.
  • Avoid using pouches that are too old or damaged.

7. وضاحتون

برانڊ	Amazon بنياديات
ماڊل نمبر	VL203
شيءِ جو وزن	2.47 پائونڊ
پيداوار جي ماپ	13.94 x 4.41 x 2.64 انچ (LxWxH) Figure 5: Diagram showing the dimensions of the laminator in inches and centimeters.
رنگ	اڇو
مواد جو قسم	ABS
شيٽ سائيز مطابقت	Up to 9 inches wide (e.g., 8.5 x 11 inches)
گرم ڪرڻ جو وقت	3-5 منٽ
ٿانءَ جي ٿلهي	3 mil and 5 mil

8. وارنٽي ۽ سپورٽ

For detailed warranty information and customer support, please refer to the official Amazon Basics webسائيٽ يا توهان جي پراڊڪٽ سان شامل دستاويز.

• استعمال ڪندڙ دستورالعمل (PDF): ڊائون لوڊ ڪريو استعمال ڪندڙ دستياب
• Warranty (PDF): وارنٽي جي معلومات ڊائون لوڊ ڪريو