Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) Instruction Manual

1. تعارف ۽ اوورview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W. Please read all instructions carefully before use and retain this manual for future reference.

The Stelpro ASHC2002W is an economical wall-mounted convector heater designed to provide dependable, quiet convection heating for spaces up to 200 square feet. It features a slim design, a built-in electronic thermostat, and a durable finish, making it suitable for various indoor environments.

Image 1.1: Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)

2. حفاظت جي ڄاڻ

WARNING: This heater is hardwired only and is NOT a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

• هن هيٽر کي انسٽال ڪرڻ يا استعمال ڪرڻ کان پهريان سڀ هدايتون پڙهو.
• انسٽاليشن يا سار سنڀال کان اڳ پڪ ڪريو ته بجلي جي فراهمي مکيه سرڪٽ بريڪر تي منقطع آهي.
• Do not install the heater closer than 3 feet (0.9 m) from the front of the heater and away from the side and rear of any combustible materials (e.g., curtains, draperies, furniture).
• Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored.
• هي هيٽر صرف اندروني استعمال لاء ٺهيل آهي.
• Keep the top air discharge grille clear of obstructions to ensure proper airflow.

3. پيڪيج مواد

پيڪيج کولڻ تي پڪ ڪريو ته سڀئي جزا موجود آهن ۽ انهن کي ڪو نقصان نه پهتو آهي:

• Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
• Concealed Mounting Bracket
• Back Entry Plate with Cable Clamps
• Installation Hardware (screws, anchors)
• ھدايت وارو دستور

4. وضاحتون

تصوير 4.1: پراڊڪٽ جي ماپ

5. تنصيب

IMPORTANT: This heater requires a 240V (or 208V) hardwired connection. It is not a plug-in unit. All wiring must be done by a qualified electrician.

Image 5.1: Hardwired Connection Requirement

5.1 هيٽر لڳائڻ

1. Choose a suitable wall location, ensuring at least 3 feet (0.9 m) clearance from any combustible materials in front, and adequate clearance from sides and rear.
2. Use the provided mounting bracket and hardware. The heater is designed for surface-mount installation.
3. Mark the drilling points on the wall using the concealed bracket as a template.
4. Drill pilot holes and insert the appropriate wall anchors (if needed for drywall).
5. مهيا ڪيل اسڪرو استعمال ڪندي ڀت تي چڙهڻ واري بریکٹ کي محفوظ ڪريو.
6. Ensure the bracket is level and securely fastened to support the heater's weight.

Image 5.2: Concealed Mounting Bracket

5.2 برقي وائرنگ

1. پڪ ڪريو ته مکيه سرڪٽ بريڪر تي بجلي بند آهي.
2. Route the 240V (or 208V) electrical supply wires to the heater's back entry plate.
3. Connect the supply wires to the heater's terminals using the cable clamps, following the wiring diagram in the full owner's manual.
4. Secure all connections and ensure no bare wires are exposed.
5. Carefully attach the heater to the mounted bracket, ensuring it locks into place.
6. مکيه سرڪٽ بريڪر تي بجلي بحال ڪريو.

6. آپريٽنگ هدايتون

Your Stelpro convector heater features a built-in electronic thermostat for precise temperature control.

Image 6.1: Built-in Electronic Thermostat

6.1 درجه حرارت مقرر ڪرڻ

• Use the up/down arrows on the thermostat's LCD screen to adjust the desired room temperature.
• The heater will automatically maintain the set temperature.

6.2 آپريٽنگ موڊس

• خودڪار موڊ: This mode can be programmed to automatically lower the temperature at night, contributing to energy savings. Refer to the full owner's manual for programming details.
• سيڪيورٽي موڊ: This feature allows you to lock the maximum setpoint temperature for safety, preventing accidental or unauthorized adjustments to higher temperatures.

7. سار سنڀال

باقاعده سار سنڀال توهان جي هيٽر جي بهترين ڪارڪردگي ۽ ڊگهي عمر کي يقيني بڻائي ٿي.

• صفائي: Ensure the heater is turned off and cool before cleaning. Use a soft, damp ٻاهرين پاسي کي صاف ڪرڻ لاءِ ڪپڙو. رگڙيندڙ صاف ڪندڙ يا محلول استعمال نه ڪريو.
• Air Grilles: Periodically check the air intake (bottom) and discharge (front) grilles for dust or debris accumulation. Gently vacuum or brush away any blockages to maintain efficient airflow.
• سالياني چڪاس: It is recommended to have a qualified electrician inspect the heater and its wiring connections annually.

8. مسئلا حل ڪرڻ

جيڪڏهن توهان جو هيٽر صحيح طريقي سان ڪم نه ڪري رهيو آهي، ته سپورٽ سان رابطو ڪرڻ کان اڳ هيٺين عام مسئلن تي صلاح ڪريو:

• هيٽر چالو نه آهي: Check the main circuit breaker to ensure power is supplied. Verify that the heater is securely mounted to the wall, as it contains a safety switch that prevents operation if not properly installed.
• ڪافي گرمي: Ensure the thermostat is set to a temperature higher than the current room temperature. Check for any obstructions around the air grilles. Verify the heater's wattage matches the room size (up to 200 sq ft for 2000W/240V).
• غير معمولي آواز: While designed for quiet operation, minor expansion/contraction noises may occur during heating/cooling cycles. If loud or persistent noises occur, disconnect power and contact support.
• Thermostat Display Issues: If the LCD display is blank or erratic, try resetting the circuit breaker for a few minutes.

For persistent issues or complex problems, please refer to the warranty and support section.

9. وارنٽي ۽ سپورٽ

Your Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) is backed by the following warranties:

• 5 سالن جي محدود وارنٽي on the overall unit.
• لائف ٽائيم وارنٽي حرارتي عنصر تي.
• 3-سال وارنٽي on electronic components.

For technical support, warranty claims, or further assistance, please contact Stelpro customer service. Refer to the contact information provided in your owner's manual or visit the official Stelpro webسائيٽ.