تعارف
This instruction manual provides detailed guidance for installing and operating your BRIKSMAX LED Lighting Kit, specifically designed for the LEGO Creator Vespa 125 (LEGO Model 10298). This lighting kit enhances the visual appeal of your LEGO model by illuminating key features, bringing it to life. Please note that this product includes only the LED lighting components; the LEGO set itself is not included.
حفاظت جي ڄاڻ
Please read all safety warnings before beginning installation. This product contains small parts and is not suitable for children under 3 years of age due to choking hazards. Adult supervision is recommended during installation. Ensure all connections are secure and avoid excessive force when handling wires and components to prevent damage.
- ننڍا حصا خبردار: Choking hazard. Keep away from young children.
- برقي حفاظت: Do not short-circuit components. Use only recommended power sources.
- تارن کي سنڀالڻ: Wires are delicate. Avoid sharp bends or excessive pulling.
- بيٽري جي حفاظت: If using a battery holder, ensure batteries are inserted with correct polarity. Do not mix old and new batteries.
ڇا شامل آهي
Your BRIKSMAX LED Lighting Kit package contains the following components:
| جزو | مقدار | وصف |
|---|---|---|
| Warm White Dot Lights (15cm) | 1 | Small LED lights for detailed illumination. |
| Red Dot Lights (15cm) | 5 | Small red LED lights, typically for taillights. |
| Large Warm White Round Light (30cm) | 1 | Larger LED for broader illumination, e.g., headlight. |
| Warm White Strip Lights | 1 | Strip of LEDs for linear lighting effects. |
| 6-port Expansion Boards | 1 | Distributes power to multiple lights. |
| 12-port Expansion Boards | 1 | Larger expansion board for more connections. |
| Connecting Cables (15cm) | 1 | Short cables for connecting components. |
| Connecting Cables (30cm) | 1 | Longer cables for connecting components. |
| Building Block Type Battery Box (AAA battery) | 1 | Power source for the lights (batteries not included). |
| 30cm USB Power Cable | 1 | Alternative power source via USB. |
| Adhesive اسڪوائر | 1 | اجزاء کي محفوظ ڪرڻ لاءِ. |
| Block Part (Random Color) | 2 | Additional LEGO-compatible blocks for integration. |
سيٽ اپ ۽ تنصيب
Follow these steps carefully to install the lighting kit onto your LEGO Creator Vespa 125 model. It is recommended to have the LEGO model fully assembled before starting the light kit installation.
- Prepare the LEGO Model: Identify the areas on your LEGO Vespa 125 where lights will be installed. This often involves carefully detaching small sections of bricks to route wires.
- هيڊ لائيٽ انسٽال ڪريو:
Locate the large warm white round light. Carefully integrate it into the headlight assembly of the Vespa. You may need to remove and reattach some LEGO bricks to secure the light and route its wire discreetly.
The main headlight of the Vespa model illuminated by the BRIKSMAX light kit. - Install Taillights:
Use the red dot lights for the rear taillight assembly. These small lights can be placed within or behind transparent red LEGO bricks to create a realistic effect. Route the wires along the underside or inside the model structure.
The rear taillight of the Vespa model illuminated by the BRIKSMAX light kit. - Interior and Accent Lighting:
Utilize the warm white dot lights and strip lights for interior areas, such as under the seat or within the engine compartment, and for accentuating other details like the flower basket. Carefully route wires to expansion boards.
The flower basket accessory on the Vespa model, illuminated to highlight its details. - ايڪسپينشن بورڊن سان ڳنڍيو:
Connect the wires from each light to the appropriate ports on the 6-port and 12-port expansion boards. Ensure connections are firm but do not force them. Use the provided connecting cables to extend reach if necessary.
- پاور ماخذ ڪنيڪشن:
Choose your preferred power source:
- بيٽري باڪس: Insert AAA batteries (not included) into the battery box, observing polarity. Connect the battery box to an available port on an expansion board.
- USB پاور ڪيبل: Connect the USB power cable to an expansion board and plug the other end into a 5V USB power adapter (not included) or a USB port on a computer/power bank.
- محفوظ اجزاء: Use the adhesive squares to secure expansion boards and excess wiring within the LEGO model, ensuring they do not interfere with the model's stability or appearance.
آپريٽنگ هدايتون
Once the BRIKSMAX LED Lighting Kit is fully installed and connected to a power source, operating it is straightforward.
- پاور آن:
If using the battery box, ensure batteries are correctly installed and the switch on the battery box is set to the "ON" position. If using the USB cable, simply connect it to a powered USB port.
- روشنيءَ جو مزو وٺو:
The lights will immediately illuminate, enhancing your LEGO Vespa 125 model. There are no additional controls for brightness or patterns; the lights are designed for constant illumination when powered.
The LEGO Vespa 125 model fully illuminated by the BRIKSMAX LED Lighting Kit, viewسامهون کان ايڊ. 
The LEGO Vespa 125 model fully illuminated by the BRIKSMAX LED Lighting Kit, viewپاسي کان ايڊ. - بجلي بند:
To turn off the lights, switch the battery box to the "OFF" position or disconnect the USB power cable from its source.
پراڊڪٽ جي مظاهري جي وڊيو
Watch the official product video for a visual guide on the lighting kit's effects and installation process.
سار سنڀال
Proper maintenance ensures the longevity and optimal performance of your BRIKSMAX LED Lighting Kit.
- صفائي: Use a soft, dry cloth to gently wipe dust from the lights and wires. Avoid using liquids or abrasive cleaners.
- تار جو انتظام: Periodically check that all wires are securely routed and not pinched or exposed. Re-secure with adhesive squares if necessary.
- بيٽري مٽائڻ: If using the battery box, replace all AAA batteries when the lights dim or cease to function. Always replace with new batteries of the same type.
- اسٽوريج: If storing the LEGO model for an extended period, disconnect the power source (remove batteries or unplug USB cable) to prevent battery drain or potential damage.
مشڪلاتون
If you encounter any issues with your lighting kit, refer to the following common problems and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| بتيون نه ٿيون لڳن. | بجلي ناهي، ڪنيڪشن ڍلو، بيٽريون ختم. | Check power source (batteries or USB). Ensure all wires are securely connected to expansion boards and lights. Replace batteries if necessary. |
| Some lights are not working. | Loose connection to specific light, damaged wire/light. | Inspect connections for the non-working lights. Gently re-seat wires. If a light or wire appears damaged, contact customer support. |
| روشنيون مدھم آهن. | Low battery power, insufficient power from USB. | Replace batteries with fresh ones. If using USB, ensure the power adapter provides sufficient 5V output. |
| Wires are visible or not fitting. | Improper routing, LEGO bricks not fully seated. | Carefully re-route wires through gaps or under bricks. Ensure LEGO bricks are pressed firmly together after installation. |
وضاحتون
- پيداوار جو نالو: BRIKSMAX LED Lighting Kit for Creator Vespa 125
- Compatible LEGO Model: LEGO Creator Vespa 125 (Model 10298)
- طاقت جو ذريعو: 3x AAA Batteries (not included) or 5V USB Power (USB cable included)
- سفارش ٿيل عمر: 8 سال ۽ مٿي
- پيداوار جي ماپ (پيڪيجنگ): 4.72 x 1.57 x 6.5 انچ (تقريبن)
- Item Weight (Packaging): 6.6 آونس (تقريبن)
- ٺاهيندڙ: Briksmax
وارنٽي ۽ سپورٽ
BRIKSMAX is committed to providing high-quality products and excellent customer service. If you have any difficulties with your product, including installation issues, missing parts, or defects, please do not hesitate to contact us.
ڪسٽمر سپورٽ: For assistance, please send us an email. Our team is always ready to help.
While specific warranty details are not provided in this manual, BRIKSMAX typically offers support for product-related issues. Please retain your proof of purchase for any warranty claims.
You can also visit the official BRIKSMAX store for more information and resources: BRIKSMAX Amazon Store
