Legrand Micromodule for Connected VMC with Netatmo

1. تعارف

This instruction manual provides essential information for the safe installation, operation, and maintenance of your Legrand Micromodule for Connected VMC (Ventilation Mécanique Contrôlée) with Netatmo. This micromodule is designed to enable smart control of a single-flow, 2-speed VMC system, with a maximum power rating of 250W. It integrates seamlessly with the Home+Control application and wireless control devices, offering enhanced convenience and energy management for your ventilation system.

مھرباني ڪري انسٽاليشن ۽ استعمال ڪرڻ کان اڳ ھن دستور کي چڱي طرح پڙھو، ۽ مستقبل جي حوالي لاءِ ان کي برقرار رکو.

2. حفاظت جي ڄاڻ

خبردار: برقي جھٽڪو جو خطرو

• Installation must be performed by a qualified electrician in accordance with all national and local electrical codes and regulations.
• Always disconnect power at the main circuit breaker before installing, servicing, or removing the device.
• Do not install or use this device if it appears damaged.
• پڪ ڪريو ته سڀئي ڪنيڪشن محفوظ آهن ۽ صحيح طور تي موصل آهن.
• This device is intended for indoor use only. Do not expose to moisture or extreme temperatures.

3. پيڪيج مواد

تصديق ڪريو ته توھان جي پيڪيج ۾ ھيٺيون شيون شامل آھن:

• Legrand Micromodule for Connected VMC
• White cover (if applicable)
• هدايت نامو (هي دستاويز)

4. سيٽ اپ ۽ تنصيب

The Legrand Micromodule is designed to be installed as close as possible to the VMC unit it controls. Professional installation is highly recommended due to the electrical nature of the device.

4.1 قبل از انسٽاليشن

1. بجلي بند ڪريو: Turn off the main power supply to the VMC circuit at your electrical panel. Verify that the power is off using a voltagاي جاچ ڪندڙ.
2. وائرنگ جي سڃاڻپ ڪريو: Identify the power supply wires and the control wires for your 2-speed VMC system. Consult your VMC's manual if necessary.

4.2 Wiring the Micromodule

Follow the wiring diagram provided with the product packaging. Typically, the micromodule will connect to the main power supply and then to the VMC's speed control inputs (e.g., low speed and high speed). Ensure proper grounding.

Image 1: Legrand Micromodule for Connected VMC. This image displays the compact design of the micromodule, highlighting its size and the terminals for electrical connections. It is typically installed within an electrical box or near the VMC unit.

4.3 Pairing with Home+Control App

1. پاور بحال ڪريو: Once wiring is complete and secure, restore power to the circuit.
2. ايپ ڊائون لوڊ ڪريو Download the Legrand Home+Control application from your device's app store.
3. اڪائونٽ ٺاهيو: ايپ کوليو ۽ اڪائونٽ ٺاهيو يا لاگ ان ٿيو.
4. ڊوائيس شامل ڪريو: Follow the in-app instructions to add a new device. The app will guide you through the pairing process, which typically involves putting the micromodule into pairing mode (refer to the specific instructions in the app or product leaflet for exact steps, often involving a short press on a button on the module or a specific power cycle sequence).
5. ڪنفگيوئر: Once paired, you can configure the VMC speeds and integrate with other Netatmo-compatible devices.

5. Operating the Micromodule

The Legrand Micromodule allows for smart control of your 2-speed VMC system.

5.1 Via Home+Control App

• Open the Home+Control app on your smartphone or tablet.
• Navigate to the VMC device.
• You will typically find options to switch between the two VMC speeds (e.g., 'Low' and 'High' or 'Normal' and 'Boost').
• The app may also allow for scheduling, automation, and integration with other smart home scenarios.

5.2 Via Wireless Control (Optional)

If you have paired the micromodule with a compatible Legrand wireless control switch, you can operate the VMC speeds directly from the switch. Refer to the instructions provided with your wireless control for specific operation details.

6. سار سنڀال

The Legrand Micromodule is designed for long-term, maintenance-free operation. However, consider the following:

• صفائي: If the exterior of the module or its cover requires cleaning, ensure power is disconnected. Use a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• فرم ويئر اپڊيٽس: Periodically check the Home+Control app for available firmware updates for your micromodule. Updates can improve performance and add new features.
• VMC Maintenance: Regular maintenance of your VMC system (e.g., filter cleaning/replacement) should be performed according to the VMC manufacturer's instructions.

7. مسئلا حل ڪرڻ

If you encounter issues with your Legrand Micromodule, try the following steps:

• ڪابه طاقت ناهي / ڪو به جواب ناهي:
  • Check the circuit breaker to ensure power is supplied to the VMC circuit.
  • Verify all wiring connections are secure (only if you are a qualified electrician).
• ايپ سان جوڙي نه ٿو سگهجي:
  • Ensure your smartphone is connected to the same Wi-Fi network as your Netatmo gateway (if applicable).
  • Restart the Home+Control app.
  • Try resetting the micromodule to factory settings (refer to the app or product leaflet for specific instructions).
  • Ensure the micromodule is within range of your Netatmo gateway or Wi-Fi network.
• VMC Not Changing Speeds:
  • Verify the VMC itself is functioning correctly when directly controlled (if possible).
  • Check the wiring between the micromodule and the VMC's speed inputs.
  • Ensure the micromodule is correctly configured in the Home+Control app.

If problems persist, contact Legrand customer support or consult a qualified electrician.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

Legrand products are designed and manufactured to the highest quality standards. For information regarding the warranty period and terms for your Micromodule, please refer to the warranty card included with your product or visit the official Legrand webسائيٽ.

For technical support, troubleshooting assistance, or to report a defective product, please contact Legrand customer service through their official webسائيٽ يا توهان جي پراڊڪٽ دستاويزن ۾ ڏنل رابطي جي معلومات.

ليگرينڊ آفيشل Webسائيٽ: www.legrand.com