Amazon Basics Portable Car Tire Inflator User Manual

1. اهم حفاظتي ڄاڻ

Please read and understand all safety warnings and instructions before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• This product is designed for inflating vehicle tires and other inflatables. Do not use it for purposes other than its intended use.
• Ensure the vehicle engine is running when using the inflator to prevent draining the vehicle's battery.
• This product can only be used with vehicle power sockets rated at 15A/180W or higher.
• Do not operate the inflator continuously for more than 10 minutes. Allow it to cool down for at least 15 minutes between uses to prevent overheating.
• Keep children and pets away from the inflator during operation.
• Do not expose the inflator to rain or wet conditions.
• Always check the recommended tire pressure for your vehicle, typically found on a sticker inside the driver's side door jamb or in the vehicle's owner's manual.
• Disconnect the power cord from the vehicle's 12V DC outlet when not in use.
• Store the inflator in a dry, cool place.

2. پراڊڪٽ ختمview

The Amazon Basics Portable Car Tire Inflator is designed for convenient and accurate tire inflation, featuring a digital pressure gauge and auto shut-off function.

شڪل 2.1: The Amazon Basics Portable Car Tire Inflator, showing its compact black and yellow design with a digital display and coiled air hose.

اهم خاصيتون:

• ڊجيٽل پريشر گيج: Provides precise pressure readings.
• پاڻمرادو بند Automatically stops inflation once the preset pressure is reached.
• Universal Valve Connector: Compatible with Schrader valves, suitable for cars, bikes, sedans, and midsize SUVs (engine size under 3.5 liters).
• ملٽي فنڪشنل: Includes battery and alternator testing capabilities.
• مربوط LED لائيٽ: For illumination in low-light conditions.
• ڪمپيڪٽ ڊيزائن: پورٽبل ۽ ذخيرو ڪرڻ آسان.

شڪل 2.2: Diagram highlighting key features: user-friendly large digital screen, extended hose length (9.2 ft / 2.8 m), Schrader valve compatibility, and a 1.2 inch / 30 mm metal cylinder for durability.

شڪل 2.3: Illustration of the inflator's performance metrics: air flow speed of 35L per minute, maximum pressure of 150 PSI, display of preset pressures, intended for indoor use only, and a red LED flashing light for emergencies. Also shows the convenient rear unit cord organizer.

شڪل 2.4: Product dimensions: 9.44 inches (24 cm) in length, 9.05 inches (23 cm) in width, and 4.33 inches (11 cm) in height.

3. سيٽ اپ ۽ شروعاتي استعمال

Before using the tire inflator, ensure your vehicle's 12V DC power socket is rated at 15A/180W or higher.

سيٽ اپ لاءِ قدم:

1. گاڏي تيار ڪريو: Ensure your vehicle is parked safely and the engine is running. This provides stable power to the inflator and prevents battery drain.
2. پاور Connectنيو: Plug the 12V DC power cord of the inflator into your vehicle's cigarette lighter or 12V accessory outlet.
3. ٽائر والو تائين رسائي: جنهن ٽائر کي توهان فليٽ ڪرڻ چاهيو ٿا ان مان والو ڪيپ هٽايو.
4. ايئر هوز کي ڳنڍيو: Securely screw the inflator's air hose connector onto the tire valve stem. Ensure a tight seal to prevent air leakage.

شڪل 3.1: Visual guide for tire inflation: 1) Turn on the vehicle engine, 2) Plug the 12V DC cord into the vehicle's cigarette lighter, 3) Connect the air hose to the vehicle tire, and 4) Monitor for pre-defined pressure on the inflator's display.

4. آپريٽنگ هدايتون

4.1. ٽائر جي افراط زر

1. Follow steps 1-4 from the "Setup and Initial Use" section.
2. مطلوب دٻاء مقرر ڪريو: Use the '+' and '-' buttons on the inflator's digital display to set your target tire pressure (PSI, BAR, or KG/CM²). Refer to your vehicle's manual or door jamb sticker for the recommended pressure.
3. يونٽ چونڊيو: Press the 'Unit' button to cycle through available pressure units (PSI, BAR, KG/CM²).
4. مهانگائي جي شروعات: Press the 'M' (Mode/Start) button to begin inflation. The inflator will automatically stop once the preset pressure is reached.
5. مانيٽر ترقي: The digital screen will show the actual pressure and a progress bar during inflation.
6. ڳنڍڻ: Once inflation is complete and the unit has stopped, disconnect the air hose from the tire valve and replace the valve cap. Unplug the 12V DC power cord from your vehicle.

شڪل 4.1: The portable tire inflator actively inflating a car tire, demonstrating its compact size and ease of use in a real-world scenario.

شڪل 4.2: Close-up of the digital display showing options for pressure unit measurement: PSI, BAR, and KG/CM².

شڪل 4.3: تفصيلي view of the pump's digital display, indicating preset pressure, selected pressure unit, actual pressure, and a progress bar during inflation.

4.2. Battery and Alternator Testing

This inflator can also test your vehicle's battery and alternator health.

1. Ensure the inflator is plugged into the vehicle's 12V DC outlet.
2. Press the 'Battery/Alternator' button. The display will show the battery voltage.
3. Start the vehicle's engine. The display will then show the alternator voltage and status (e.g., "Good", "Low").
4. Refer to your vehicle's manual for ideal battery and alternator voltage حدون.

شڪل 4.4: Display showing the alternator test results, including actual alternator voltage ۽ حيثيت.

4.3. ايل اي ڊي لائيٽ استعمال ڪرڻ

The integrated LED light can be used for illumination in dark environments.

• Press the 'Light' button to turn the LED light on or off.
• The light can be used independently of the inflation function, as long as the unit is powered.

5. سار سنڀال

مناسب سار سنڀال توهان جي ٽائر انفليٽر جي ڊگهي عمر ۽ بهترين ڪارڪردگي کي يقيني بڻائي ٿي.

• صفائي: انفليٽر جي ٻاهرين حصي کي نرم، ڊي سان صاف ڪريوamp ڪپڙو. استعمال نه ڪريو سخت ڪيميائي يا گھڻائي صاف ڪندڙ.
• اسٽوريج: Store the inflator in a dry, cool place, away from direct sunlight and extreme temperatures. Utilize the convenient rear cord organizer to keep the power cord neatly stored.
• Air Hose Care: Ensure the air hose is not kinked or damaged during storage.
• فيوز مٽائڻ: If the inflator stops working, check the fuse located in the 12V DC power plug. Replace it with a fuse of the same rating (typically 15A). A spare fuse is usually included with the product.

6. مسئلا حل ڪرڻ

If you encounter issues with your Amazon Basics Portable Car Tire Inflator, refer to the following common problems and solutions:

7. وضاحتون

8. وارنٽي ۽ سپورٽ

For warranty information and customer support, please refer to the official Amazon Basics documentation or visit the Amazon Basics support page.

A digital copy of the warranty document is available at: ايميزون بيسڪس وارنٽي (پي ڊي ايف)

For further assistance, please contact Amazon customer service.