پيداوار ختمview
The Lanzar VBE420P is a 4-band parametric equalizer designed to enhance your audio system with precise sound control. Featuring a 9 Volt RMS pre-amp output and selectable dual input sources (RCA and auxiliary), this unit allows for detailed adjustment of bass, mid-bass, mid, and high frequencies. It includes dedicated subwoofer gain control and a fader for front/rear speaker balance, ensuring a customized and immersive listening experience. Its compact half-DIN size makes it suitable for various installations.
دٻي ۾ ڇا آهي
Image: The Lanzar VBE420P 4-Band Parametric Equalizer shown with its packaging and included accessories.
- Lanzar VBE420P 4-Band Parametric Equalizer with Subwoofer
- 2 وingندڙ بریکٹ
- 8 فلپس سر اسڪرو
- پاور ريڊ وائر 1A فيوز سان
- اڳ-amp Line Aux Inputs via RCA & Phone Jacks
سيٽ اپ ۽ تنصيب
چڙهڻ
The VBE420P features a half-DIN size, allowing for flexible installation in various vehicle dashboards or custom locations. Use the provided mounting brackets and screws to secure the unit. Ensure the mounting location allows for proper ventilation and access to controls.
Image: The Lanzar VBE420P Equalizer seamlessly integrated into a car's dashboard, demonstrating its compact size and potential for discreet installation.
وائرنگ ڪنيڪشن
تصوير: هڪ تفصيلي view of the rear panel of the Lanzar VBE420P, highlighting the RCA input and output jacks for various audio components.
- پاور ڪنيڪشن: Connect the red power wire (with 1A fuse) to a switched 12V power source. Connect the black ground wire to a clean chassis ground. Connect the remote turn-on wire to your head unit's remote output.
- ان پٽ ذريعن: The unit supports two input sources. Use the RCA input jacks for your main audio source (e.g., head unit). An auxiliary input is also available for connecting portable devices like MP3 players or phones.
- Connectاھر ڪنيڪشن: Connect the RCA outputs (Front, Rear, Subwoofer) to your power amplifiers. The subwoofer output provides a 9 Volt RMS pre-amp signal for powerful bass.
برابر ڪندڙ کي هلائڻ
Image: The front control panel of the Lanzar VBE420P, illustrating the various knobs and switches for adjusting audio settings.
فرنٽ پينل ڪنٽرول
- حجم ڪنٽرول: Adjusts the overall output volume of the equalizer.
- Fader (Front/Rear): Balances the audio output between the front and rear speakers.
- Subwoofer Gain Control: سب ووفر چينل جي آئوٽ پُٽ ليول کي ترتيب ڏئي ٿو.
- Subwoofer فريکوئنسي ڪنٽرول: Allows adjustment of the subwoofer crossover frequency between 60Hz and 90Hz.
- برابر ڪندڙ بينڊ: Seven adjustable bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz, 16KHz) allow for precise tuning of specific frequency ranges. Each band can be adjusted from -12dB to +12dB.
- ان پٽ سليڪٽر سوئچ: Toggles between the main RCA input and the auxiliary input.
- روشني چونڊيندڙ سوئچ: Controls the blue light illumination of the unit.
سار سنڀال
To ensure long-lasting performance of your Lanzar VBE420P equalizer, follow these simple maintenance guidelines:
- صفائي: Use a soft, dry cloth to wipe the exterior of the unit. Avoid abrasive cleaners or solvents that could damage the finish.
- ماحول: Keep the equalizer away from excessive heat, moisture, and direct sunlight. Ensure adequate ventilation around the unit.
- ڪنيڪشن: وقتي طور تي سڀني وائرنگ ڪنيڪشنن کي چيڪ ڪريو ته جيئن پڪ ڪري سگهجي ته اهي محفوظ ۽ سنکنرن کان پاڪ آهن.
مشڪلاتون
If you encounter issues with your Lanzar VBE420P, refer to the following common problems and solutions:
- طاقت ناهي: Check the power, ground, and remote turn-on connections. Ensure the 1A fuse is intact.
- آواز ناهي: Verify all RCA input and output connections. Check the input selector switch to ensure the correct source is selected. Confirm that connected ampلائفائرز آن آهن ۽ ڪم ڪري رهيا آهن.
- تحريف: Reduce the input level from your head unit or the equalizer's volume control. Ensure all equalizer bands are not set to extreme boost levels. Check for proper grounding.
- اڻ برابر آواز (کاٻي/ساڄي): Adjust the fader control to balance the sound between front and rear speakers. Check individual channel RCA connections.
وضاحتون
Image: The Lanzar VBE420P Equalizer displaying its physical dimensions: 7 inches (length), 4.1 inches (width), and 1.10 inches (height).
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | VBE420P |
| شيون طول و عرض (L x W x H) | 7 x 4.1 x 1.1 انچ |
| شيءِ جو وزن | 1.67 پائونڊ |
| اڳ-Amp اوٽ وولٽtage | 9 Volt RMS |
| آپريٽنگ جلدtage | 11V - 15V (DC) |
| Number of Equalizer Bands | 4 (Bass, Mid-Bass, Mid, High) |
| Frequency Adjustment Range | -12dB کان +12dB في بينڊ |
| Subwoofer فريکوئنسي ڪنٽرول | 60Hz - 90Hz |
| ان پٽ ذريعن | آر سي اي، معاون |
| مواد | ڌاتو، پلاسٽڪ |
| رنگ | ڪارو |
| ٺاهيندڙ | چوڌاري آواز |
وارنٽي ڄاڻ
Lanzar products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Lanzar webسائيٽ. ڪنهن به وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
ڪسٽمر سپورٽ
Should you require further assistance or have questions not covered in this manual, please contact Lanzar customer support. Contact information can typically be found on the product packaging or the official Lanzar website. Please have your model number (VBE420P) and purchase details ready when contacting support.
