Hoco CA104 ٽيليسڪوپڪ گريوٽي ڪار فون هولڊر استعمال ڪندڙ دستياب

1. تعارف

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hoco CA104 Telescopic Gravity Car Phone Holder. Please read this manual carefully before use to ensure proper functionality and safety.

Image 1.1: The Hoco CA104 car phone holder with a smartphone securely held in place, demonstrating its gravity linkage mechanism and adjustable arm.

2. پيداوار جا حصا

The Hoco CA104 holder consists of the following main parts:

• Gravity Linkage Clamp: Automatically adjusts to hold the phone when inserted.
• ٽيليسڪوپڪ بازو: Allows for extension and retraction to adjust distance.
• ترتيب ڏيڻ وارو بال جوائنٽ: Enables 360-degree rotation and angle adjustment of the phone.
• سکشن ڪپ جو بنياد: Provides secure attachment to flat surfaces like dashboards or windshields.
• لاڪنگ ليور: Activates the suction cup for firm adhesion.

تصوير 2.1: View of the Hoco CA104 holder, highlighting the suction cup base and the adjustable telescopic arm before phone insertion.

3. تنصيب جون هدايتون

The Hoco CA104 can be installed on either the car dashboard or windshield.

3.1 ڊيش بورڊ جي انسٽاليشن

1. مٿاڇري کي صاف ڪريو: Ensure the dashboard surface is clean and dry.
2. هولڊر کي پوزيشن ڏيو: Place the suction cup base on the desired flat area of your dashboard.
3. سکشن ڪپ کي محفوظ ڪريو: Press down firmly on the suction cup while pushing the locking lever downwards to create a vacuum seal.
4. زاويه ترتيب ڏيو: Use the telescopic arm and ball joint to adjust the holder to your preferred viewing angle. Tighten any adjustment knobs to secure the position.

Image 3.1: The Hoco CA104 holder securely mounted on a car dashboard, providing a stable platform for a smartphone running a navigation application.

3.2 ونڊشيلڊ جي انسٽاليشن

1. مٿاڇري کي صاف ڪريو: Ensure the windshield surface is clean and dry.
2. هولڊر کي پوزيشن ڏيو: Place the suction cup base on the desired area of your windshield.
3. سکشن ڪپ کي محفوظ ڪريو: Press down firmly on the suction cup while pushing the locking lever downwards to create a vacuum seal.
4. زاويه ترتيب ڏيو: Use the telescopic arm and ball joint to adjust the holder to your preferred viewing angle. Tighten any adjustment knobs to secure the position.

Image 3.2: The Hoco CA104 holder mounted on a car windshield, offering an alternative placement for optimal viewing of a smartphone's display.

4. آپريٽنگ هدايتون

4.1 توهان جو فون داخل ڪرڻ

1. Ensure the gravity linkage arms are open.
2. Place your phone into the bottom support arms of the holder.
3. As the phone's weight presses down, the side arms will automatically close and secure the phone.

Image 4.1: The Hoco CA104 holder with its gravity linkage arms in the open position, illustrating the mechanism before a phone is placed inside.

4.2 توهان جو فون ڪڍڻ

1. Gently lift your phone upwards from the holder.
2. The gravity linkage arms will automatically release and open, allowing you to remove the phone.

4.3 ترتيب ڏيڻ Viewزاويه

• Loosen the knob on the ball joint to adjust the phone's angle (horizontal or vertical) and rotation.
• Loosen the knob on the telescopic arm to extend or retract the arm for optimal distance.
• Tighten all knobs after adjustment to secure the holder's position.

5. سنڀال ۽ سار سنڀال

• صفائي: هولڊر کي نرم، ڊي سان صاف ڪريوamp ڪپڙو. استعمال نه ڪريو abrasive cleaners يا solvents.
• سکشن ڪپ: If the suction cup loses adhesion, rinse it with warm water and let it air dry. This can restore its stickiness.
• اسٽوريج: When not in use for extended periods, detach the holder and store it in a cool, dry place away from direct sunlight.
• گرمي پد: Avoid exposing the holder to extreme temperatures, as this may affect the material integrity.

6. مسئلا حل ڪرڻ

7. مصنوعات جي وضاحت

• ماڊل: CA104
• مواد: ABS، سلڪون
• Surface Technology: Sun pattern oil spray
• طول و عرض: 100 x 95 x 170 ملي ميٽر
• وزن: 151 جي
• موازن فون سائيز: 4.5 - 7.0 انچ
• Clamp حد: 60 - 85 ملي ميٽر
• قابل اطلاق منظر: Car dashboard, windshield
• خاص خاصيتون: Telescopic arm, vertical and horizontal adjustment, gravity linkage