آسان سيamp Huntsville 600 Tent User Manual

تعارف

Thank you for choosing the Easy Camp Huntsville 600 Tent. This manual provides essential information for the safe and effective setup, operation, maintenance, and troubleshooting of your tent. Designed for comfort and durability, the Huntsville 600 accommodates up to 6 people, offering a spacious interior with multiple compartments and weather-resistant materials for various outdoor conditions.

حفاظت جي ڄاڻ

• Always set up your tent on level ground, clear of sharp objects, and away from open flames or heat sources.
• Ensure proper ventilation, especially when using cooking equipment inside or near the tent. Carbon monoxide can be deadly.
• Secure all guy lines and pegs firmly to prevent the tent from collapsing in windy conditions.
• Do not use candles or other open flame devices inside the tent.
• Keep children and pets supervised around the tent, especially during setup and takedown.
• In severe weather, evacuate the tent and seek safer shelter.

پيڪيج مواد

سيٽ اپ شروع ڪرڻ کان اڳ، پڪ ڪريو ته سڀئي جزا موجود آهن:

• Tent Flysheet (Outer Tent)
• Inner Tent(s)
• Tent Poles (Fiberglass or Aluminum, depending on model variant)
• خيمه جا پيگ / اسٽيڪ
• گائي رپس
• ڪيري جو ٿيلهو
• Repair Kit (may include fabric patches and pole repair sleeve)

سيٽ اپ جون هدايتون

Follow these steps for a quick and easy setup of your Huntsville 600 Tent:

1. پنھنجي سائيٽ چونڊيو: Select a flat, dry area, clear of debris and sharp objects. Consider wind direction and natural drainage.
2. پيڪ کوليو ۽ لي آئوٽ ڪريو: Remove the tent from its carry bag and spread the flysheet flat on the ground, with the black base facing down.
3. قطب گڏ ڪريو: Connect the pole sections. Identify the different pole lengths if applicable and match them to their corresponding sleeves on the tent.
4. قطب داخل ڪريو: Slide the assembled poles through the sleeves on the flysheet. Ensure they are fully inserted and seated.
5. خيمو بلند ڪريو: Gently lift the tent by the poles, bending them to form the tent's structure. Secure the pole ends into the pins or grommets at the base of the tent.
6. Peg Down the Base: Secure the four corners of the tent to the ground using pegs. Ensure the tent is taut and square.
7. Attach Inner Tents: If not pre-attached, clip or toggle the inner tents to the designated loops inside the flysheet.
8. Extend Guy Ropes: Extend all guy ropes and peg them securely into the ground at a 45-degree angle from the tent. Adjust the tensioners to make the tent taut and stable.
9. آخري ترميمون: Check all zips, doors, and windows. Ensure proper ventilation.

Image: The Easy Camp Huntsville 600 Tent fully erected, showcasing its spacious design and multiple sections.

تصوير: الف view inside the tent, highlighting the entrance to one of the inner sleeping compartments.

آپريٽنگ هدايتون

وينٽيليشن

The Huntsville 600 Tent is designed with multiple ventilation points to ensure airflow and reduce condensation. Utilize the mesh panels on doors and windows, and ensure any top vents are open, especially during warmer weather or when the tent is occupied. Proper ventilation helps maintain a comfortable internal temperature and prevents moisture buildup.

Living Space and Compartments

The tent features a spacious living area and separate sleeping compartments. Use the internal dividers to create private sleeping zones as needed. Keep pathways clear for easy movement. The integrated groundsheet in the living area provides protection from the elements.

Image: Interior shot showing the entrances to two separate sleeping compartments within the tent.

سار سنڀال ۽ سنڀال

• صفائي: Clean the tent with a soft brush or sponge and lukewarm water. Do not use detergents, bleach, or harsh chemicals, as these can damage the fabric's waterproofing.
• خشڪ ڪرڻ: هميشه پڪ ڪريو ته خيمو مڪمل طور تي سڪي ويو آهي ان کي پيڪ ڪرڻ کان اڳ. پيڪنگ جو اشتهارamp tent can lead to mildew, mold, and fabric degradation. If you must pack it wet, unpack and dry it thoroughly as soon as possible.
• اسٽوريج: خيمه کي ٿڌي، سڪل جاءِ تي رکو، سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري.
• زپ: Keep zippers clean and free of dirt. Lubricate them periodically with a silicone-based spray if they become stiff.
• مرمت: Use the included repair kit for small tears or punctures. For larger damage, consult a professional repair service.
• پنروڪ: Over time, the tent's waterproofing may degrade. Re-apply a suitable tent-specific waterproofing spray as needed, following the product's instructions.

Packing Away Your Tent

1. Remove all pegs and detach inner tents.
2. Remove poles from sleeves and disassemble them.
3. Lay the flysheet flat and fold it neatly to the width of the pole bag.
4. Place the pole bag and peg bag at one end of the folded tent.
5. خيمي کي مضبوطيءَ سان گھمايو، جيترو ٿي سگهي هوا ٻاهر ڪڍو.
6. Place the rolled tent into its carry bag.

مشڪلاتون

وضاحتون

تصوير: طول و عرض مٿانview of the Huntsville 600 Tent, indicating approximate length, width, and height.

وارنٽي ۽ سپورٽ

آسان سيamp products are manufactured to high quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Easy Camp website. For technical support, spare parts, or any inquiries not covered in this manual, please contact Easy Camp انهن جي سرڪاري چينلن ذريعي ڪسٽمر سروس.

Webسائيٽ: www.easycamp.com