DIGITEN TTC-1003 ريپٽائل گرمي پد ڪنٽرولر استعمال ڪندڙ دستياب

1. تعارف

The DIGITEN TTC-1003 is a versatile 3-stage outlet temperature controller designed for precise environmental management. It features two temperature-controlled outlets and one timer-controlled outlet, allowing for independent regulation of heating, cooling, and lighting cycles. This device is suitable for a wide range of applications, including reptile habitats, incubators, greenhouses, mushroom cultivation, and home brewing. This manual provides detailed instructions for the safe and effective operation of your TTC-1003 controller.

Figure 1: DIGITEN TTC-1003 Temperature Controller

2. حفاظت جي ڄاڻ

مھرباني ڪري ڊوائيس هلائڻ کان اڳ سڀ حفاظتي ھدايتون پڙھو ۽ سمجھو. انھن ھدايتن تي عمل ڪرڻ ۾ ناڪامي بجليءَ جو جھٽڪو، باهه، يا پراڊڪٽ کي نقصان پھچائي سگھي ٿي.

• بجلي جي فراهمي کي يقيني بڻائيtage matches the specifications of the controller (100-240V AC).
• Do not immerse the main controller unit in water or expose it to excessive moisture. The temperature probes are waterproof, but the main unit is not.
• Always unplug the device from the power outlet before cleaning or performing any maintenance.
• Do not exceed the maximum rated current of 15A for the entire unit.
• ڊوائيس ٻارن ۽ پالتو جانورن جي پهچ کان پري رکو.
• Do not disassemble or modify the controller. Refer all servicing to qualified personnel.
• Ensure all connected appliances are in good working condition and do not exceed the controller's wattage حدون.

3. پراڊڪٽ ختمview

3.1 اجزاء

• DIGITEN TTC-1003 Controller Unit
• 2 x Temperature Sensor Probes (2m / 78.74in each)
• Power Cord (1.4m / 55.12in)

3.2 اهم خاصيتون

• استعمال ۾ آسان: Plug-and-play design with a large LCD display.
• آزاد ڪنٽرول: Two temperature-controlled outlets (OUT1, OUT2) and one timer-controlled outlet (OUT3) operate independently.
• وسيع درجه حرارت جي حد: Regulates and maintains temperatures from 14°F to 248°F (-10°C to 120°C).
• ٻٽي سينسر جاچ: Two probes for reliable temperature tracking.
• Day/Night Temperature Control: Allows for different temperature settings for day and night cycles on temperature-controlled outlets.
• ٽائيمنگ فنڪشن: Outlet 3 offers a time cycle function for lighting or other timed devices.
• ميموري فنڪشن: All settings are saved in the event of a power outage.
• درجه حرارت يونٽ سوئچ: آساني سان سيلسيس (°C) ۽ فارنهائيٽ (°F) جي وچ ۾ سوئچ ڪريو.
• هاء / گهٽ درجه حرارت الارم: Provides alerts for temperature deviations.

Figure 2: Key Features of the TTC-1003

4. سيٽ اپ جون هدايتون

4.1 شروعاتي جڳهه

1. Choose a dry, stable location for the controller unit, away from direct sunlight or heat sources.
2. The unit can be wall-mounted using the integrated hanging slot on the back.

Figure 3: Wall-Mounted Installation

4.2 Connecting Probes and Devices

1. Plug the two temperature sensor probes into the designated ports on the top of the controller.
2. Position the sensor probes in the environment where temperature monitoring is required. Ensure they are not directly exposed to heating elements or water if not intended.
3. Plug your heating or cooling devices into OUT1 and OUT2. These outlets are temperature-controlled.
4. Plug your lighting or other timed devices into OUT3. This outlet is timer-controlled.
5. Plug the controller's power cord into a standard electrical outlet. The LCD display will illuminate.

شڪل 4: مثالample Applications and Connections

5. آپريٽنگ هدايتون

The controller features a large LCD display and three buttons: سيٽ, گھڙي، ۽ مٿي/هيٺ تير.

5.1 موجوده وقت مقرر ڪرڻ

1. کي دٻايو ۽ رکو گھڙي button for 3 seconds until the hour digit flashes.
2. استعمال ڪريو مٿي/هيٺ تير ڪلاڪ کي ترتيب ڏيڻ لاء.
3. دٻايو گھڙي again to move to the minute digit, then adjust with مٿي/هيٺ تير.
4. دٻايو گھڙي تصديق ڪرڻ ۽ نڪرڻ لاءِ.

5.2 Temperature Control (Outlets 1 & 2)

Outlets 1 and 2 are independently controlled for temperature. Each can be set for heating or cooling mode with specific ON/OFF temperatures and operating times.

1. کي دٻايو ۽ رکو سيٽ button for 3 seconds to enter programming mode. The display will show 'OUT1' or 'OUT2' and the first setting will flash.
2. استعمال ڪريو مٿي/هيٺ تير to select 'OUT1' or 'OUT2'. Press سيٽ تصديق ڪرڻ.
3. وقت مقرر ڪريو: The 'ON' time will flash. Use مٿي/هيٺ تير ڪلاڪ مقرر ڪرڻ لاء، پوء دٻايو سيٽ to set minutes. This is the time when temperature control for this outlet begins.
4. بند ڪرڻ جو وقت: The 'OFF' time will flash. Use مٿي/هيٺ تير ڪلاڪ مقرر ڪرڻ لاء، پوء دٻايو سيٽ to set minutes. This is the time when temperature control for this outlet ends.
5. Set ON Temperature: The 'ON Temp' will flash. Use مٿي/هيٺ تير to set the temperature at which the connected device turns ON.
6. Set OFF Temperature: The 'OFF Temp' will flash. Use مٿي/هيٺ تير to set the temperature at which the connected device turns OFF.
7. Determine Mode (Heating/Cooling):
   • If ON Temp < OFF Temp: The controller operates in حرارتي موڊ. The device turns on when the temperature drops to ON Temp and turns off when it reaches OFF Temp.
   • If ON Temp > OFF Temp: The controller operates in کولنگ موڊ. The device turns on when the temperature rises to ON Temp and turns off when it reaches OFF Temp.
8. دٻايو سيٽ to cycle through additional settings (High Alarm, Low Alarm, Calibration) or press گھڙي بچائڻ ۽ نڪرڻ لاءِ.

Figure 5: Temperature Control Programming Example

5.3 Timer Control (Outlet 3)

Outlet 3 operates as a simple timer, allowing for two independent ON/OFF periods within a 24-hour cycle.

1. کي دٻايو ۽ رکو سيٽ button for 3 seconds to enter programming mode.
2. استعمال ڪريو مٿي/هيٺ تير to select 'OUT3'. Press سيٽ تصديق ڪرڻ.
3. پهريون ڀيرو وقت مقرر ڪريو: The 'ON' time for the first period will flash. Adjust with مٿي/هيٺ تير ۽ تصديق سان سيٽ.
4. پهريون بند وقت مقرر ڪريو: The 'OFF' time for the first period will flash. Adjust with مٿي/هيٺ تير ۽ تصديق سان سيٽ.
5. ورجايو قدمن لاء Second ON Time ۽ Second OFF Time if a second timed period is desired. If not, set the second ON time to be the same as the second OFF time to disable it.
6. دٻايو گھڙي بچائڻ ۽ نڪرڻ لاءِ.

Figure 6: Timer Control Programming Example for Outlet 3

5.4 گرمي پد يونٽ جي چونڊ (°C/°F)

To switch between Celsius and Fahrenheit, briefly press the UP تير button while in normal operating mode.

5.5 High/Low Temperature Alarms (AH/AL)

You can set high and low temperature alarms for Outlets 1 and 2 to be notified if the temperature goes outside your desired range.

1. Enter programming mode for OUT1 or OUT2 (as described in 5.2).
2. After setting ON/OFF temperatures, press سيٽ until 'AH' (High Alarm) flashes. Use مٿي/هيٺ تير to set the desired high temperature limit.
3. دٻايو سيٽ until 'AL' (Low Alarm) flashes. Use مٿي/هيٺ تير to set the desired low temperature limit.
4. دٻايو گھڙي بچائڻ ۽ نڪرڻ لاءِ.

6. سار سنڀال

Regular maintenance ensures the longevity and accuracy of your DIGITEN TTC-1003 controller.

• صفائي: Wipe the controller unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
• تحقيق جي سنڀال: Periodically inspect the temperature probes for any signs of damage or wear. Ensure the probes are clean for accurate readings. The probes are waterproof and can be cleaned with a damp ڪپڙو.
• اسٽوريج: If storing the device for an extended period, unplug it and store it in a cool, dry place.

Figure 7: Waterproof Temperature Probe

7. مسئلا حل ڪرڻ

If you encounter issues with your controller, refer to the table below for common problems and solutions.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

9.1 پروڊڪٽ وارنٽي

DIGITEN provides a one-year warranty for any quality problems with this product. Please retain your proof of purchase for warranty claims.

9.2 ڪسٽمر سپورٽ

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact DIGITEN customer support. You can find contact information and additional resources by visiting the official DIGITEN store:

Visit the DIGITEN Store on Amazon