Veepeak 1220

ويپيڪ 1220 12V ڪار بيٽري ٽيسٽر استعمال ڪندڙ دستياب

ماڊل: 1220

1. تعارف

The Veepeak 1220 12V Car Battery Tester is a versatile diagnostic tool designed to assess the health of 12V lead-acid batteries and their associated charging and cranking systems. It provides quick and accurate readings for various battery types, helping users determine if a battery is in good condition, needs recharging, or requires replacement. This manual provides detailed instructions for the proper use and maintenance of your Veepeak 1220 Battery Tester.

2. پراڊڪٽ ختمview

Veepeak 1220 12V Car Battery Tester with clamps

شڪل 1: Veepeak 1220 12V Car Battery Tester. This image shows the compact red device with its display screen, navigation buttons (ESC, OK, up, down), and attached red and black battery clamps.

2.1 دٻي ۾ ڇا آهي

  • Battery tester with clamps and cord
  • استعمال ڪندڙ جو دستياب (ھي دستاويز)

2.2 اهم خاصيتون

  • بيٽري جي صحت جي چڪاس: Scans and displays the overall status of a 12V auto battery, including State of Charge (SOC), State of Health (SOH), voltage, internal resistance, and Cold Cranking Amps (سي سي اي).
  • Alternator & Starting System Tester: Reads ripple, loaded, and unloaded voltage to assess alternator performance and checks cranking voltage and time for starting capability.
  • Plug and Play & High Accuracy: Tests batteries (even dead ones) in-vehicle or out-of-vehicle with high accuracy (close to 0.01V with overall accuracy close to 99.9%).
  • وسيع مطابقت: Compatible with all 12V lead-acid batteries from 100 to 2000 CCA (Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB).
  • حفاظتي خاصيتون: Includes polarity reverse protection and is spark-proof with no heat connection.

3. سيٽ اپ

Before using the Veepeak 1220 Battery Tester, ensure the battery terminals are clean and free of corrosion for accurate readings.

  1. 12V بيٽري تي مثبت (+) ۽ منفي (-) ٽرمينلز جي سڃاڻپ ڪريو.
  2. ڳنڍيو لال clamp of the tester to the positive (+) battery terminal.
  3. ڳاڙهو cl سان ڳنڍيوamp of the tester to the negative (-) battery terminal.
  4. The tester will automatically power on once connected. The main menu will appear on the screen.

نوٽ: The device features polarity reverse protection, meaning it will not be damaged if the clamps are connected incorrectly. However, always strive for correct connection for safety and proper operation.

4. آپريٽنگ هدايتون

Navigate the menu using the Up/Down arrow buttons and confirm selections with the OK button. Use the ESC button to go back to the previous screen.

4.1 بيٽري ٽيسٽ

This test assesses the overall health of your battery.

Veepeak 1220 performing a battery test showing SOC, SOH, and internal resistance icons.

شڪل 2: Multi-Functional 12V Battery Analyzer. The screen displays options for Battery Test, Cranking Test, and Charging Test.

  1. From the Main Menu, select "1. Battery Test" and press OK.
  2. Select the appropriate battery type (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB) and press OK.
    Veepeak 1220 screen showing compatible battery types.

    شڪل 3: Compatible Battery Types selection screen.

  3. Input the Cold Cranking Amps (CCA) rating of your battery. This information is usually found on the battery label. Use the Up/Down arrows to adjust the value and OK to confirm.
  4. The tester will perform the test and display the results, including SOH, SOC, internal resistance, and voltage. It will also indicate if the battery is "GOOD BATTERY", "RECHARGE", or "REPLACE".

4.2 ڪريڪنگ ٽيسٽ

This test evaluates the battery's ability to start the engine.

Veepeak 1220 performing a cranking test on a car battery.

شڪل 4: Cranking Test in progress. The screen shows cranking time and voltage.

  1. From the Main Menu, select "2. Cranking Test" and press OK.
  2. The screen will prompt "Start Engine".
  3. Start the vehicle's engine.
  4. The tester will automatically detect the cranking event and display the cranking time and voltage. It will indicate if the cranking is "GOOD" or "LOW".

4.3 چارجنگ سسٽم ٽيسٽ

This test checks the alternator and the vehicle's charging system.

Veepeak 1220 performing a charging system test.

شڪل 5: Charging System Test screen showing loaded, unloaded voltage, and ripple.

  1. From the Main Menu, select "3. Charging Test" and press OK.
  2. The screen will prompt for a "Ripple Test". Press OK.
  3. The screen will then prompt "Increase RPM to 2500 R/min and keep it 5 seconds. Press OK to continue."
  4. With the engine running, increase the engine RPM to approximately 2500 for 5 seconds. It is recommended to have a second person assist with this step.
  5. Press OK. The tester will display the loaded voltagاي، ڪولڊ وولtage, and ripple. It will indicate if the charging is "HIGH", "NORMAL", or "LOW".

5. سار سنڀال

  • Keep the tester clean and dry. Wipe it with a soft, damp ڪپڙا جيڪڏهن ضروري هجي.
  • ٽيسٽر کي سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري ٿڌي، سڪل جاءِ تي ذخيرو ڪريو.
  • Regularly inspect the cables and clampنقصان يا پائڻ جي ڪنهن به نشاني لاءِ. جيڪڏهن ضروري هجي ته تبديل ڪريو.
  • Ensure the battery terminals are clean before testing to prevent inaccurate readings.

6. مسئلا حل ڪرڻ

مسئلوممڪن سببحل
ٽيسٽر پاور آن نٿو ٿئي.Poor connection to battery terminals; Battery voltagاي تمام گهٽ.ڪل کي يقيني بڻايوamps are securely connected. Check battery voltage with a voltmeter; if below 9V, charge the battery before testing.
غلط پڙھڻ.Corroded battery terminals; Incorrect CCA input.Clean battery terminals. Verify the correct CCA rating for your battery.
"LOW" cranking result.Weak battery; Issues with starter motor.Recharge or replace the battery. Consult a professional mechanic if the issue persists.
"LOW" or "HIGH" charging result.Alternator malfunction; Loose or corroded connections in charging system.Inspect alternator and charging system connections. Consult a professional mechanic for diagnosis and repair.

7. وضاحتون

  • پيداوار جي ماپ: 5.06 x 2.85 x 0.87 انچ
  • شيء جو وزن: 10.23 اونس
  • طاقت جو ذريعو: Battery Powered (from tested battery)
  • منٽ. آپريٽنگ Voltage: 12 وولٽ
  • سي سي اي رينج: 100-2000 سي سي اي
  • مطابقت رکندڙ بيٽري جا قسم: باقاعده فلڊڊ، AGM فليٽ پليٽ، AGM اسپائرل، GEL، EFB
  • ٺاهيندڙ: ويپڪ

8. وارنٽي ۽ سپورٽ

The Veepeak 1220 12V Car Battery Tester comes with a one-year hassle-free replacement warranty.

For technical support, troubleshooting assistance, or warranty claims, please contact Veepeak customer service through their official webسائيٽ يا پرچون ڪندڙ جتي پراڊڪٽ خريد ڪئي وئي هئي.

مھرباني ڪري وارنٽي جي مقصدن لاءِ خريداري جو ثبوت رکو.

لاڳاپيل دستاويز - 1220

اڳيview ويپڪ 1220 12V ڪار بيٽري ٽيسٽر يوزر مينوئل ۽ ڀليڪار گائيڊ
ويپڪ 1220 12V ڪار بيٽري ٽيسٽر لاءِ سرڪاري يوزر مينوئل ۽ ڀليڪار گائيڊ. حفاظت، پراڊڪٽ جون خاصيتون، بيٽري ٽيسٽنگ، ڪرينڪنگ ٽيسٽ، چارجنگ ٽيسٽ، ٻيهر شامل آهن.view, setup, and support. Includes specifications and supported battery standards.
اڳيview VEEPEAK OBDCheck VP11 يوزر مينوئل: خاصيتون، سيٽ اپ، ۽ ٽربل شوٽنگ گائيڊ
VEEPEAK OBDCheck VP11 بلوٽوٿ OBD2 تشخيصي اسڪينر لاءِ جامع صارف دستياب. ان جي خاصيتن، سيٽ اپ هدايتن، مطابقت رکندڙ گاڏين ۽ ايپس، مسئلا حل ڪرڻ جا طريقا، ۽ سپورٽ معلومات بابت سکو.
اڳيview ويپيڪ او بي ڊي چيڪ BLE+ يوزر مينوئل: بلوٽوٿ او بي ڊي II اسڪينر گائيڊ
ويپيڪ او بي ڊي چيڪ بي ايل اي + بلوٽوٿ 4.0 او بي ڊي II اسڪينر کي ڳولهيو. هي گائيڊ يونيورسل او بي ڊي آءِ / اي او بي ڊي گاڏين لاءِ iOS ۽ اينڊرائيڊ ڊوائيسز سان ڪار ڊائگنوسٽڪ ڪوڊ ريڊر استعمال ڪرڻ لاءِ ضروري معلومات فراهم ڪري ٿو.
اڳيview Veepeak OBDCheck VP30 User Manual: Guide to CAN OBD II Scan Tool Functions
Comprehensive user manual for the Veepeak OBDCheck VP30 CAN OBD II Scan Tool. Learn how to read and erase diagnostic trouble codes (DTCs), check emission readiness status, and understand OBD II terminology for compliant vehicles.
اڳيview ويپيڪ او بي ڊي چيڪ بي ايل استعمال ڪندڙ هدايتون: سيٽ اپ، مطابقت، ۽ مسئلو حل ڪرڻ جي گائيڊ
پنهنجي Veepeak OBDCheck BLE OBD-II اسڪين ٽول سان شروع ڪريو. هي گائيڊ گاڏي جي مطابقت، ايپ سفارشون، تڪڙو سيٽ اپ، عام مسئلا، مسئلو حل ڪرڻ، ۽ وارنٽي جي معلومات کي ڍڪي ٿو.
اڳيview FAQs und Fehlerbehebung für Veepeak OBDCheck VP11
Umfassende FAQs und detaillierte Fehlerbehebung für den Veepeak OBDCheck VP11 (V2.2509). Finden Sie Antworten auf häufige Fragen zur Kompatibilität, Verbindung und Nutzung mit verschiedenen Fahrzeugen und Apps.