RAINPOINT Water Timer for Garden Hose - 2 Zone Sprinkler Timer User Manual

تعارف

This manual provides detailed instructions for the RAINPOINT 2 Zone Sprinkler Timer, designed to automate your garden and lawn watering needs. It features two independent programmable zones, multiple watering frequencies, manual watering modes, and a rain delay function to optimize water usage and ensure healthy plant growth. Please read this manual carefully before operation.

Image: The RAINPOINT 2 Zone Sprinkler Timer, showing its digital display and control dial.

سيٽ اپ ۽ تنصيب

1. بيٽري لڳائڻ

• ڊوائيس جي پٺي تي بيٽري جي خاني کي ڳولھيو.
• Open the compartment and insert two new AAA (1.5V) alkaline batteries, ensuring correct polarity.
• محفوظ طور تي بيٽري جي ڪمري کي بند ڪريو.

Image: Visual guide highlighting the easy setup process, including battery insertion and quick installation.

2. Mounting to Faucet

• پڪ ڪريو ته نل بند آهي.
• Apply Teflon tape to the faucet threads for a secure, leak-proof seal (optional but recommended).
• Align the timer's inlet with the faucet outlet and twist clockwise until snug. Do not overtighten.

3. Device Activation and Testing

• Turn the timer dial to the "ON" position.
• Press and hold the "MANUAL" button for 3-5 seconds to enter manual mode.
• Press the "ZONE" button twice to select both Zone 1 and Zone 2.
• When the screen flashes, immediately press the "OK" button to start manual watering.
• Listen for two clicks, indicating the valves have opened.
• Turn the dial to "OFF" to close the valves. Repeat this process 3-5 times.
• Open the faucet and repeat the activation steps. Check for any leaks or abnormal water flow.

Programming Automatic Watering

1. Setting Time Format (12/24-Hour)

• Turn the dial to "SET CLOCK".
• Use the "+" or "-" button to select between 12H or 24H format.
• Press "OK" to confirm and enter the time setting interface.

2. موجوده وقت مقرر ڪرڻ

• Use the "+" or "-" button to set the current exact time (hours first, then minutes).
• Use the "OK" button to switch between hours and minutes.
• Turn the dial to "START TIME" to save changes and proceed.

3. Setting Start Time (0:00-24:00)

• Turn the dial to "START TIME".
• Use the "+" or "-" button to set the desired watering start time.
• Use the "ZONE" button to switch between zones and set individual start times if needed.
• Turn the dial to "HOW LONG" to save changes and proceed.

4. Setting Irrigation Duration (1min-3h59min)

• Turn the dial to "HOW LONG".
• Use the "+" or "-" button to adjust the watering duration.
• Use the "ZONE" button to switch between zones and set individual durations. Setting a duration of "00:00" will disable a specific zone.
• Turn the dial to "HOW OFTEN" to save changes and proceed.

5. Setting Irrigation Frequency (every 1hr - 12hrs, or every 1-7 days)

• Turn the dial to "HOW OFTEN".
• Use the "+" or "-" button to set the desired watering interval (e.g., every 6 hours, every 2 days).
• Turn the dial to "ON" to activate the programmed schedule.

Image: Illustrates the two auto cycle modes: hourly (1-12 hours) and daily (1-7 days) for flexible watering.

دستي پاڻي ڏيڻ جو طريقو

1. Access Manual Watering Mode

• Keep the dial at "ON".
• Press and hold the "MANUAL" button for 3-5 seconds.

2. Select the Desired Zone (Zone 1, Zone 2, Both Zones)

• Use the "ZONE" button to select the desired zone (Zone 1, Zone 2, or Both Zones simultaneously).

3. Set Duration (1min-8hrs)

• Use the "+" or "-" button to adjust the duration (1 minute to 8 hours).
• Press the "OK" button to begin manual watering.

Image: Demonstrates the manual watering feature, allowing users to water on demand without interrupting programmed schedules.

برسات جي دير جي فنڪشن

The rain delay function helps prevent overwatering and conserves water by temporarily suspending the automatic watering schedule during rainy periods.

1. Access Rain Delay Mode (24h/48h/72h)

• Press and hold the "DELAY" button for 3-5 seconds.
• Use the "+" or "-" button to adjust the delay duration (24, 48, or 72 hours).
• Press "OK" to confirm the rain delay. The timer will suspend automatic watering for the selected duration.

Image: Highlights the rain delay options (24, 48, or 72 hours) to conserve water during rainfall.

سار سنڀال ۽ سنڀال

• گھٽ بيٽري ڊيڄاريندڙ: The timer features a 2.5" LED display that indicates low battery. The valve will automatically close if the battery is low. Replace batteries promptly.
• استحڪام: The timer is made with IP54 high-impact plastic and heavy-duty construction. It includes a built-in metal filter and a 2nd-generation valve diaphragm with self-cleaning technology for extended service life (up to 600,000 times).
• ليڪ جي روڪٿام: An added seal ring to the battery cover helps prevent water leaks. Ensure all connections are tight.
• پاڻي جو دٻاء: Suitable water pressure is 0.5-8 Bar. Avoid use with low water pressure devices like rain barrels, as it may affect performance.

Image: Details the IP65 waterproof upgrade and enhanced durability features of the timer.

مشڪلاتون

پيداوار جي وضاحت

وارنٽي ۽ سپورٽ

RAINPOINT products are known for their durability and reliability. This water timer comes with a 5-year warranty, as noted by many satisfied customers. For any questions, technical assistance, or warranty claims, please refer to the contact information provided in your Quick Start Guide or visit the official RAINPOINT webسائيٽ.

Happy Gardening!