Leviton LP622-BPD 66 Space, 66 Circuit Indoor Load Center User Manual

1. تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of the Leviton LP622-BPD 66 Space, 66 Circuit Indoor Load Center with a 225 Amp Main Circuit Breaker. Please read this manual thoroughly before proceeding with any installation or operation to ensure safe and correct usage of the product.

2. حفاظت جي ڄاڻ

WARNING: Risk of electric shock or electrocution. Installation and servicing of this equipment must be performed by qualified personnel only. Always disconnect power at the main service panel before working on or near the load center.

• پڪ ڪريو ته انسٽاليشن دوران سڀئي مقامي ۽ قومي اليڪٽريڪل ڪوڊس تي عمل ڪيو وڃي.
• مناسب ذاتي حفاظتي سامان (پي پي اي) پائڻ، جنهن ۾ موصل دستانا ۽ حفاظتي چشما شامل آهن.
• Verify that the power supply matches the load center's specifications (225A, Three Phase).
• گندي يا ڊي ۾ انسٽال نه ڪريوamp locations unless specifically rated for such environments. This unit is NEMA 1 rated for indoor use.

3. پراڊڪٽ ختمview

The Leviton LP622-BPD is a 66-space, 66-circuit indoor load center designed for residential and light commercial applications. It features a factory-installed 225 Amp main circuit breaker and tin-plated copper bussing for superior conductivity. The modern design includes a white, powder-coated finish. The enclosure and interior are included; the door is sold separately.

اهم خاصيتون:

• آسان وائرنگ: Revolutionary design allows rough-in wiring without circuit breakers present.
• Superior Conductivity: Equipped with tin-plated copper bussing.
• Organized Wiring: Notches for cable ties promote secure and neat wiring.
• جديد جمالياتي: White, powder-coated finish.
• اعلي ظرفيت: 66 spaces for up to 66 circuits.

شڪل 3.1: اندروني view of the Leviton LP622-BPD Load Center, showing the main breaker and circuit breaker spaces.

4. تنصيب ۽ سيٽ اپ

Installation of the Leviton LP622-BPD Load Center should only be performed by a qualified electrician. Follow these general steps:

1. انڪلوزر تي چڙهڻ: Securely mount the load center enclosure to a suitable surface, ensuring it is level and plumb.
2. Rough-in Wiring: Route all incoming and outgoing electrical wires into the load center. The design allows for wiring without breakers installed, simplifying the process.
3. Connecting Main Power: Connect the main service entrance conductors to the factory-installed 225 Amp main circuit breaker.
4. Connecting Branch Circuits: Connect the individual branch circuit wires to the appropriate terminals within the load center. Utilize the cable tie notches for organized wiring.
5. Installing Circuit Breakers: Once wiring is complete, snap the individual circuit breakers into their designated spaces. The plug-on design ensures easy and secure installation.

Figure 4.1: A hand demonstrating the installation of a plug-on circuit breaker into the load center bussing.

شڪل 4.2: هڪ سابقample of a Leviton Load Center with neatly organized wiring, utilizing the integrated cable tie notches.

Optional Smart Home Integration:

The Leviton Load Center is compatible with Leviton's smart circuit breakers and whole-house energy monitor for advanced energy management and monitoring. This involves:

1. Install the Leviton Whole House Energy Monitor.
2. Snap in 2nd Gen Smart Circuit Breakers.
3. Enroll Breakers in the My Leviton App.

Figure 4.3: Visual representation of the three steps for integrating the load center with Leviton's smart home ecosystem.

5. آپريشن

Operating the Leviton Load Center primarily involves managing the circuit breakers. Each circuit breaker controls a specific electrical circuit in your property.

• سرڪٽ کي آن/آف ڪرڻ: To turn a circuit on, push the breaker handle firmly to the 'ON' position. To turn it off, push the handle to the 'OFF' position.
• ٽرپ ٿيل بريڪر کي ري سيٽ ڪرڻ: If a circuit breaker trips (moves to a middle or 'OFF' position), it indicates an overload or fault. First, identify and resolve the cause of the trip. Then, push the breaker handle firmly to the 'OFF' position, and then back to the 'ON' position to reset it.
• مشاهدي جي دري: If an optional window door is installed, an observation window allows for at-a-glance operating status of all circuit breakers.

شڪل 5.1: بند اپ view of circuit breakers within the load center, visible through an observation window in the cover.

Figure 5.2: Comparison of a standard door and a window door option for the Leviton Load Center. Note: Door sold separately.

6. سار سنڀال

Regular maintenance helps ensure the longevity and safe operation of your Leviton Load Center. Always disconnect power before performing any maintenance.

• بصري چڪاس: Periodically inspect the load center for any signs of damage, loose connections, or corrosion.
• صفائي: Keep the load center interior and exterior clean and free from dust and debris. Use a dry, non-abrasive cloth.
• ڪنيڪشن مضبوط ڪريو: Over time, electrical connections can loosen. Have a qualified electrician periodically check and tighten all terminal screws.
• Breaker Testing: If your load center includes GFCI or AFCI breakers, test them monthly according to their individual instructions.

7. مسئلا حل ڪرڻ

This section addresses common issues you might encounter with your load center.

For issues not covered here, or if you are unsure about any troubleshooting step, contact a qualified electrician or Leviton customer support.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

Leviton products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Leviton website. If you require technical assistance, have questions about installation, or need to report a product issue, please contact Leviton customer support.

Leviton Customer Support:

• جو دورو ڪريو ايميزون تي ليويٽون اسٽور پراڊڪٽ جي معلومات لاءِ.
• Refer to the official Leviton webرابطي جي تفصيل ۽ سپورٽ وسيلن لاءِ سائيٽ.