1. تعارف
This manual provides instructions for the installation, operation, and maintenance of the Thermalright TL-C12CW 120mm CPU/Case Fan. This fan is designed to provide efficient cooling for computer cases and CPU coolers, featuring PWM speed control and an S-FDB bearing for quiet and reliable performance.
تصوير 1.1: سامهون view of the Thermalright TL-C12CW 120mm fan.
2. اهم خاصيتون
- High Performance Cooling: Automatic speed control via 4-pin PWM interface, adjusting fan speed up to 1550 RPM based on motherboard temperature. Includes a 55cm cable for PWM series control.
- S-FDB Bearing: Features a Stably-FDB (Fluid Dynamic Bearing) with magnetic design to stabilize the fan blade in motion, minimizing noise and extending fan lifespan while providing efficient cooling.
- وائبريشن جي گھٽتائي: Equipped with four soft silicone corner pads on all sides to reduce vibration and friction, ensuring low noise operation.
- ورسٽائل ايپليڪيشن: Suitable for use as a case fan, with CPU coolers, or water cooler radiators to enhance overall system cooling.
- پائيدار تعمير: Made from industrial-grade PBT+PC material for strength and safety.
Image 2.1: Soft-touch silicone rubber pads for vibration absorption.
Image 2.2: S-FDB bearing with magnetic design for stability.
Image 2.3: Optimized airflow fan blade design.
3. دٻي ۾ ڇا آهي
The Thermalright TL-C12CW package typically includes:
- 1 x Thermalright TL-C12CW 120mm Fan
- Mounting Screws (standard inclusion for most fans)
Note: Contents may vary slightly. Please check your package upon receipt.
4. سيٽ اپ ۽ تنصيب
Before installation, ensure your computer is powered off and disconnected from the power source. Refer to your computer case or CPU cooler manual for specific mounting locations and procedures.
4.1. Case Fan Installation
- ڪيس تيار ڪريو: Open your computer case and identify the desired fan mounting location (e.g., front, rear, top, bottom).
- هوا جي وهڪري جي هدايت جو تعين ڪريو: Fans typically have an arrow indicating airflow direction. Install the fan to ensure proper airflow (intake or exhaust) for your system's cooling strategy.
- پنکڙو لڳايو: Align the fan with the screw holes on your case. Secure the fan using the provided mounting screws. Do not overtighten.
- پاور Connectنيو: Connect the fan's 4-pin PWM cable to an available 4-pin fan header on your motherboard. Ensure the connector is fully seated.
4.2. CPU Cooler/Radiator Fan Installation
If replacing an existing fan on a CPU cooler or radiator, follow the cooler's specific instructions for fan removal and installation. Generally:
- Remove Old Fan (if applicable): Disconnect the old fan's power cable and remove its mounting hardware.
- Attach New Fan: Secure the TL-C12CW fan to the CPU cooler heatsink or radiator using the appropriate mounting clips or screws provided with your cooler/radiator.
- پاور Connectنيو: Connect the fan's 4-pin PWM cable to the CPU_FAN header on your motherboard or a dedicated fan header on your liquid cooler pump.
تصوير 4.1: اڳوڻيamples of fan installation in various scenarios: chassis heat dissipation, air-cooled CPU cooler, and liquid cooling radiator.
5. آپريشن
The Thermalright TL-C12CW fan utilizes a 4-pin PWM (Pulse Width Modulation) connection for automatic speed control. Once connected to a compatible motherboard header, the fan speed will be regulated by the motherboard's BIOS/UEFI settings or operating system software based on system temperature.
- خودڪار رفتار ڪنٽرول: The fan's speed will automatically adjust between its minimum and maximum RPM (up to 1550 RPM) to maintain optimal cooling performance and minimize noise.
- BIOS/UEFI سيٽنگون: You can typically fine-tune fan curves and speed profiles within your motherboard's BIOS/UEFI settings. Refer to your motherboard manual for detailed instructions.
- سافٽ ويئر ڪنٽرول: Some motherboards offer dedicated software utilities for fan control directly from your operating system.
تصوير 5.1: ريئر view of the fan, highlighting the 4-pin PWM cable for speed synchronization.
6. سار سنڀال
Regular maintenance helps ensure optimal performance and longevity of your fan.
- مٽي هٽائڻ: Periodically clean dust from the fan blades and frame using compressed air or a soft brush. Ensure the fan is powered off and disconnected before cleaning.
- چڪاس: Check for any obstructions around the fan blades or signs of wear on the cable.
- لوبريڪيشن کان پاسو ڪريو: The S-FDB bearing is designed for long-term, maintenance-free operation and does not require additional lubrication.
7. مسئلا حل ڪرڻ
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| پنو نه گھمڻ |
|
|
| زياده شور |
|
|
| خراب ٿڌي ڪارڪردگي |
|
|
8. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | TL-C12CW |
| طول و عرض | 120mm (L) x 120mm (W) x 25mm (H) |
| وزن | 5.9 آونس (تقريبن 167 گرام) |
| شرح ڪيل رفتار | 1550 RPM تائين |
| هوا جي وهڪري جي گنجائش | 66.17 CFM (ڪيوبڪ فوٽ في منٽ) |
| شور جي سطح | 25.6 ڊي بي (اي) |
| پاور ڪنيڪٽر | 4-Pin PWM |
| جلدtage | 12 وولٽ |
| واتtage | 2.4 واٽ |
| بيئرنگ جو قسم | S-FDB (Fluid Dynamic Bearing) |
| مواد | PBT+PC (silicon pads) |
| مطابقت رکندڙ ڊوائيسز | ڊيسڪ ٽاپ ڪمپيوٽرن |
Image 8.1: Visual representation of key specifications for the TL-C12CW fan.
9. وارنٽي ۽ سپورٽ
Thermalright products are typically covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Thermalright webسائيٽ.
For technical support, troubleshooting assistance, or warranty claims, please contact Thermalright customer service through their official webسائيٽ يا پرچون ڪندڙ جتي پراڊڪٽ خريد ڪئي وئي هئي.
ٺاهيندڙ: حرارتي حق
