1. تعارف
This manual provides detailed instructions for the installation, operation, and maintenance of your Brandmotion Wireless Observation IR Camera System with a 7-inch HD Monitor (Model AHDS-7810V2). This system is designed to enhance visibility and security for various vehicles, including RAM 1500 (09-2018) and Heavy Duty (2010-Current) trucks, as well as RVs and trailers. It features a wireless camera, a 7-inch HD monitor with DVR capabilities, and infrared night vision for clear viewڏينهن هجي يا رات.
2. پيڪيج مواد
مھرباني ڪري تصديق ڪريو ته ھيٺ ڏنل سڀ شيون توھان جي پيڪيج ۾ شامل آھن:
- 7-inch HD DVR Monitor
- Wireless HD Observation Camera
- Monitor Suction Cup Mount
- Monitor Dashboard Mount
- ڪئميرا لڳائڻ واري بریکٹ
- DC Power Cable for Monitor (Cigarette Lighter Adapter)
- DC Power Cable for Camera
- Antennas (for Monitor and Camera)
- Installation Hardware (screws, etc.)
شڪل 2.1: All components included in the Brandmotion AHDS-7810V2 Wireless HD Observation System, including the 7-inch monitor, wireless camera, various mounting brackets, power cables, and antennas.
3. سيٽ اپ ۽ تنصيب
3.1 تنصيب جي نگراني
- Choose a suitable location for the 7-inch HD monitor on your vehicle's windshield or dashboard that does not obstruct your view يا ايئر بيگز ۾ مداخلت ڪريو.
- Attach the suction cup mount or dashboard mount to the monitor.
- Secure the monitor to the chosen surface. Ensure the mount is firmly attached.
- Connect the DC power cable to the monitor and plug the other end into your vehicle's 12V accessory outlet (cigarette lighter).
- Attach the antenna to the designated port on the monitor.
3.2 ڪئميرا لalائڻ
- Select a mounting location for the wireless camera that provides the desired field of view, typically at the rear of the vehicle or trailer. Ensure the location allows for a clear line of sight for wireless transmission if possible.
- Use the provided camera mounting bracket and hardware to securely attach the camera. You may need to drill pilot holes.
- Adjust the camera's swivel head to achieve the optimal viewزاويه.
- Connect the DC power cable to the camera. This cable typically connects to a 12V power source on your vehicle (e.g., reverse lights for a backup camera function, or constant power for continuous observation).
- Attach the antenna to the designated port on the camera.
شڪل 3.1: The wireless camera positioned next to the 7-inch HD monitor, illustrating the compact design of the observation system.
3.3 Initial Pairing (if necessary)
The camera and monitor are typically pre-paired from the factory. If they do not connect automatically, refer to the 'MENU' options on the monitor to initiate a pairing process. Ensure both devices are powered on and within range (up to 80 feet for a reliable connection).
4. آپريٽنگ هدايتون
4.1 پاور آن/آف
Once connected to power, the monitor should power on automatically or by pressing the power button. To power off, press and hold the power button.
4.2 مانيٽر ڪنٽرول
The monitor features several buttons for navigation and control:
- ڪيم: Switches between connected cameras (supports up to 4 cameras).
- مينيو Accesses system settings, including pairing, display options, and recording settings.
- - / +: Navigates menu options or adjusts settings (e.g., brightness, volume).
- داخل ٿيڻ: مينيو ۾ چونڊن جي تصديق ڪري ٿو.
- ڪارڊ: Accesses recorded footage or initiates recording.
4.3 Viewداخل ٿيڻ جا طريقا
The monitor can display video from a single camera or multiple cameras simultaneously in a split-screen view. Use the 'CAM' button to cycle through available camera views.
شڪل 4.1: The 7-inch HD monitor shows a split-screen view from multiple cameras, illustrating the system's capability to display various angles simultaneously.
4.4 Recording Functionality
The monitor includes DVR functionality, allowing you to record video footage. Insert a microSD card (up to 128GB, not included) into the designated slot. Refer to the 'MENU' for recording settings such as continuous recording, loop recording, and motion detection.
شڪل 4.2: The system supports continuous recording to enhance security, capturing footage from multiple cameras.
4.5 انفراريڊ نائيٽ ويزن
The camera is equipped with infrared (IR) LEDs to provide clear visibility in low-light conditions or complete darkness.
5. سار سنڀال
5.1 صفائي
To clean the monitor screen and camera lens, use a soft, lint-free cloth. For stubborn dirt, dampen the cloth with water or a mild, non-abrasive cleaning solution. Avoid harsh chemicals that could damage the surfaces.
5.2 موسم جي حفاظت
The wireless camera features an IP65 international protection rating, indicating it is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for outdoor use in various weather conditions.
شڪل 5.1: The wireless camera features a waterproof casing, providing protection against environmental elements for enhanced durability.
6. مسئلا حل ڪرڻ
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| مانيٽر تي ڪابه تصوير ناهي | Power issue, camera/monitor not paired, out of range, antenna not connected. | Check power connections. Ensure both camera and monitor are powered on. Re-pair devices via monitor menu. Ensure devices are within 80ft range and antennas are securely attached. |
| Image flickering or poor quality | Weak wireless signal, interference, low battery (if applicable). | Reduce distance between camera and monitor. Check for sources of interference (e.g., other wireless devices). Ensure stable power supply. |
| رڪارڊنگ ڪم نه ڪري رهي آهي | No microSD card, card full, card not formatted, recording settings incorrect. | Insert a compatible microSD card (up to 128GB). Format the card via monitor menu. Check recording settings. |
| Monitor mount not secure | Surface not clean, suction cup not properly engaged. | Clean the mounting surface thoroughly. Ensure the suction cup lever is fully engaged. Consider using the dashboard mount for a more permanent solution. |
| Installation screws too long/holes too small | Incompatibility with specific vehicle mounting points. | Use appropriate drill bits to enlarge holes if necessary, or acquire shorter screws suitable for your specific application. |
7. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نالو | AHDS-7810V2 |
| اسڪرين جي ماپ | 7 انچ |
| وڊيو ڪيپچر ريزوليوشن | 1080 ص |
| فريم جي شرح | 30 فريم في سيڪنڊ |
| رابطي ٽيڪنالاجي | وائي فائي (وائرليس) |
| وائرليس ڪميونيڪيشن رينج | Up to 80 feet (reliable connection) |
| چينلن جو تعداد | 4 (supports up to 4 cameras) |
| طاقت جو ذريعو | DC (4 Volts, 3 Watts) |
| Camera Light Source Type | انفراريڊ |
| Camera International Protection Rating | IP65 (مٽي کان محفوظ، پاڻي جي جيٽن کان محفوظ) |
| اسٽوريج سپورٽ | MicroSD card up to 128GB (for DVR) |
| مواد | پلاسٽڪ |
| پيداوار جي ماپ (L x W x H) | 3.5 x 8.5 x 12 انچ |
| شيءِ جو وزن | 3.07 پائونڊ |
8. وارنٽي ۽ سپورٽ
8.1 وارنٽي ڄاڻ
The Brandmotion Wireless Observation IR Camera System (AHDS-7810V2) comes with a 2 سال وارنٽي خريداري جي تاريخ کان. هي وارنٽي عام استعمال هيٺ مواد ۽ ڪاريگري ۾ خرابين کي ڍڪيندي آهي. مھرباني ڪري وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
8.2 ڪسٽمر سپورٽ
For technical assistance, troubleshooting, or warranty inquiries, please contact Brandmotion's US-based support team. Detailed contact information can be found on the official Brandmotion webسائيٽ تي يا پنهنجي پرچون ڪندڙ ذريعي.
گهمڻ www.brandmotion.com وڌيڪ معلومات ۽ سپورٽ وسيلن لاء.
