AXIS Q6225-LE PTZ ڪئميرا يوزر دستياب

1. تعارف

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Axis Communications AXIS Q6225-LE PTZ Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety. This camera is designed for robust outdoor surveillance in challenging conditions.

2. حفاظت جي ڄاڻ

Observe the following safety precautions to prevent damage to the product or injury to personnel:

• تنصيب: Installation must be performed by qualified personnel in accordance with all local and national electrical and building codes.
• بجلي جي فراهمي: Use only the specified power supply (60 watts) for this device. Ensure the power source is stable and meets the camera's requirements.
• ماحول: The camera is designed for outdoor use. However, avoid exposing it to extreme conditions beyond its specified operating range.
• صفائي: صفائي ڪرڻ کان اڳ بجلي بند ڪريو. نرم، سڪل ڪپڙو استعمال ڪريو. مائع يا ايروسول ڪلينر استعمال نه ڪريو.
• تبديليون: Do not attempt to modify or disassemble the camera. This may void the warranty and pose safety risks.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• AXIS Q6225-LE PTZ ڪئميرا
• انسٽاليشن ھدايت
• Mounting Bracket ۽ هارڊويئر
• Network Cable Connector
• Documentation and Software CD (if applicable)

شڪل 1: AXIS Q6225-LE PTZ Camera. This image displays the grey-colored PTZ camera unit, highlighting its robust housing and integrated lens system, designed for outdoor surveillance.

4. سيٽ اپ ۽ تنصيب

4.1 ڪئميرا لائڻ

The AXIS Q6225-LE is designed for wall mount installation. Ensure the mounting surface is strong enough to support the camera's weight and withstand environmental conditions.

1. هڪ مناسب چڙهڻ واري جڳهه چونڊيو جيڪو گهربل فيلڊ مهيا ڪري view and is within reach of power and network connections.
2. Use the provided mounting template to mark drill holes on the wall.
3. Drill pilot holes and secure the mounting bracket using appropriate screws and anchors.
4. Attach the camera to the mounting bracket, ensuring it is firmly locked in place.

4.2 پاور ۽ نيٽ ورڪ ڪنيڪشن

Connect the camera to power and network as follows:

• طاقت: Connect the power cable to a 60-watt power source. Ensure the connection is secure and weatherproof.
• نيٽ ورڪ: Connect an Ethernet cable from your network switch or router to the camera's network port. The camera supports Wi-Fi for wireless communication. Refer to the network configuration section for wireless setup.

4.3 شروعاتي ترتيب

After physical installation and connection, access the camera's web interface for initial configuration:

1. کوليو a web browser on a computer connected to the same network as the camera.
2. Enter the camera's IP address in the browser's address bar. If the IP address is unknown, use the AXIS IP Utility tool to discover it.
3. Follow the on-screen prompts to set up a new password for the administrator account.
4. Configure basic network settings, date/time, and video stream settings.

5. ڪئميرا کي هلائڻ

5.1 پين، ٽِلٽ، ۽ زوم (PTZ) ڪنٽرول

The AXIS Q6225-LE camera features full PTZ capabilities, allowing remote adjustment of its viewing angle and zoom level. Control is typically performed via the camera's web interface or compatible video management software (VMS).

• پان: Rotate the camera horizontally to cover a wider area.
• جھلڻ: Adjust the camera vertically to view objects at different heights.
• بصري زوم: Use the optical zoom feature to magnify distant objects without loss of image quality.

5.2 حرڪت جي ڳولا ۽ خبرداريون

The camera supports motion-only alerts. Configure motion detection zones and sensitivity settings in the web interface to trigger recordings or notifications when movement is detected.

5.3 Infrared (IR) Illumination

Equipped with infrared light sources, the camera provides clear video surveillance in low-light or complete darkness. IR illumination activates automatically or can be manually controlled.

6. سار سنڀال

6.1 صفائي

Regular cleaning of the camera lens and housing is recommended to ensure optimal performance, especially in dusty or harsh environments.

• Gently wipe the lens with a soft, lint-free cloth. For stubborn dirt, use a lens cleaning solution specifically designed for optical surfaces.
• Clean the camera housing with a damp ڪپڙو. گھڙڻ وارا صاف ڪندڙ يا محلولن کان پاسو ڪريو.

6.2 فرم ویئر تازه ڪاريون

وقتي طور تي ايڪسس ڪميونيڪيشن چيڪ ڪريو website for firmware updates. Keeping the camera's firmware up-to-date ensures access to the latest features, security enhancements, and bug fixes.

7. مسئلا حل ڪرڻ

This section addresses common issues you might encounter with your AXIS Q6225-LE camera.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the official Axis Communications webسائيٽ تي وڃو يا پنهنجي مجاز ڊيلر سان رابطو ڪريو. خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.

آن لائين وسيلا: www.axis.com