LANCOM R&S يونائيٽيڊ فائر وال UF-60 LTE يوزر مينوئل

1. تعارف

This manual provides essential information for the installation, operation, and maintenance of your LANCOM R&S Unified Firewall UF-60 LTE. Please read this manual thoroughly before using the device to ensure proper setup and functionality. Retain this document for future reference.

2. حفاظت جي ڄاڻ

Observe the following safety precautions to prevent damage to the device or injury to personnel:

• پڪ ڪريو ته ڊوائيس هڪ مستحڪم، سطحي سطح تي رکيل آهي.
• ڊوائيس کي نمي، انتهائي گرمي پد، يا سڌي سج جي روشني ۾ نه لڳايو.
• صرف ڊوائيس سان فراهم ڪيل پاور اڊاپٽر استعمال ڪريو.
• ڊوائيس نه کوليو casing. سڀني خدمتن کي قابل اهلڪارن جي حوالي ڪريو.
• وڌيڪ گرميءَ کان بچڻ لاءِ وينٽيليشن جا کولا صاف رکو.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• LANCOM R&S Unified Firewall UF-60 LTE device
• پاور اڊاپٽر
• Two LTE Antennas
• Ethernet ڪيبل
• تڪڙو شروع ھدايت

4. ڊوائيس اوورview

Familiarize yourself with the physical components and indicators of the UF-60 LTE firewall.

Figure 4.1: Front Panel of LANCOM UF-60 LTE
This image displays the front panel of the LANCOM UF-60 LTE Unified Firewall. The device is white with two black external antennas connected at the rear, extending upwards. On the left side of the front panel, the 'LANCOM Systems' and 'ROHDE & SCHWARZ' logos are visible. On the right side, a series of LED indicators are present. These indicators include four for Ethernet ports (labeled ETH0, ETH1, ETH2, ETH3) and additional status indicators for LTE signal, Wi-Fi, and general system status.

4.1. Front Panel Indicators

• ETH0-ETH3 LEDs: Indicate activity and link status for the respective Ethernet ports.
• ايل ٽي اي ايل: Shows the status of the LTE connection (e.g., signal strength, connection active).
• سسٽم جي حالت LED: Indicates the overall operational status of the device.

4.2. Rear Panel Ports (Typical Configuration)

• پاور ان پٽ: فراهم ڪيل پاور اڊاپٽر سان ڳنڍي ٿو.
• Ethernet Ports (ETH0-ETH3): For connecting to your network devices (LAN) and WAN.
• LTE Antenna Connectors: For attaching the external LTE antennas.
• سم ڪارڊ سلاٽ: For inserting a SIM card for LTE connectivity.
• ري سيٽ بٽڻ: فيڪٽري ڊفالٽ سيٽنگون بحال ڪرڻ لاءِ استعمال ڪيو ويندو آهي.

5. سيٽ اپ

5.1. هارڊويئر لڳائڻ

1. Antennas ڳنڍڻ: Screw the two LTE antennas onto the connectors at the rear of the device.
2. سم ڪارڊ داخل ڪريو: Open the SIM card slot cover and insert a valid SIM card. Ensure correct orientation.
3. نيٽ ورڪ ڪيبل ڳنڍيو:
   • Connect your internet source (e.g., modem) to the designated WAN Ethernet port (typically ETH0).
   • Connect your local network devices (e.g., computer, switch) to the LAN Ethernet ports (ETH1-ETH3).
4. پاور Connectنيو: Plug the power adapter into the device's power input and then into an electrical outlet. The device will power on automatically.

5.2. شروعاتي ترتيب جي رسائي

After powering on, wait for the system status LED to indicate readiness (refer to the Quick Start Guide for specific LED patterns).

1. Ensure your computer is connected to one of the LAN ports (ETH1-ETH3) of the firewall.
2. کوليو a web برائوزر ۽ ڊفالٽ IP پتو داخل ڪريو (مثال طور، http://192.168.1.1) or the hostname of the device.
3. Follow the on-screen instructions to complete the initial setup wizard, which typically includes setting up administrator credentials, network settings, and basic firewall rules.

6. ڊوائيس کي هلائڻ

The LANCOM R&S Unified Firewall UF-60 LTE operates primarily through its web-based management interface. This interface allows for comprehensive configuration and monitoring.

6.1. Accessing the Management Interface

To access the management interface:

1. Ensure your computer is connected to the firewall's network.
2. کوليو a web browser and navigate to the device's IP address or hostname.
3. پنهنجو ايڊمنسٽريٽر يوزر نالو ۽ پاسورڊ داخل ڪريو.

6.2. Key Features and Configuration Areas

• نيٽ ورڪ ٺاھ جوڙ: Manage WAN (LTE, Ethernet), LAN, VLANs, and routing.
• فائر وال ضابطا: Define security policies, access control lists, and intrusion prevention.
• وي پي اين: Configure Virtual Private Network connections for secure remote access or site-to-site links.
• LTE Management: Monitor LTE signal strength, data usage, and connection status.
• سسٽم سيٽنگون: Manage user accounts, firmware updates, backups, and logging.

7. سار سنڀال

7.1. فرمائيندڙ تازه ڪاريون

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates are typically performed via the web management interface under the 'System' or 'Maintenance' section. Always back up your configuration before performing a firmware update.

7.2. صفائي

Clean the device periodically with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

7.3. ترتيب ڏيڻ وارو بيڪ اپ

It is recommended to regularly back up your device configuration. This allows for quick restoration of settings in case of an issue or when migrating to a new device.

8. مسئلا حل ڪرڻ

هي حصو عام مسئلن کي حل ڪري ٿو جيڪي توهان کي منهن ڏئي سگهن ٿا.

• طاقت ناهي:

  Ensure the power adapter is securely connected to both the device and a working electrical outlet. Verify the power outlet is functional.

• No Internet Connection (Ethernet WAN):

  Check the Ethernet cable connection between the firewall's WAN port and your modem/internet source. Verify that your modem is operational and receiving an internet signal. Check WAN configuration in the management interface.

• No Internet Connection (LTE):

  Ensure the SIM card is correctly inserted and active. Check LTE antenna connections. Verify LTE signal strength and connection status in the management interface. Contact your mobile network provider if the SIM card or service is suspected to be the issue.
• مئنيجمينٽ انٽرفيس تائين رسائي نه ٿي سگهي:

  Verify your computer is connected to a LAN port of the firewall. Ensure your computer's IP settings are set to obtain an IP address automatically (DHCP). Try clearing your browser's cache or using a different browser. If the IP address was changed, use the new address. If all else fails, a factory reset might be necessary (refer to the Quick Start Guide for reset procedure).

9. ٽيڪنيڪل وضاحتون

نوٽ: وضاحتون بغير اطلاع جي تبديل ٿي سگهن ٿيون. سڀ کان وڌيڪ تازي معلومات لاءِ، مھرباني ڪري ٺاھيندڙ جي سرڪاري ويب سائيٽ جو حوالو ڏيو. website. The "Connectivity Technology: HDMI" might be a misclassification in the source data, as firewalls typically use Ethernet for primary network connectivity.

10. وارنٽي ۽ سپورٽ

10.1. وارنٽي ڄاڻ

The LANCOM R&S Unified Firewall UF-60 LTE comes with a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are provided by Lancom Systems. Please refer to the warranty card included with your product or visit the official Lancom Systems webتفصيلي ڄاڻ لاء سائيٽ.

10.2. ٽيڪنيڪل سپورٽ

For technical assistance, product registration, or to download the latest drivers and firmware, please visit the official support portal of Lancom Systems. You may also find FAQs and additional resources there to help resolve common issues.

ٺاهيندڙ Webسائيٽ: www.lancom-systems.com