پيداوار ختمview
The Phrozen Water-Washable Rapid Black Resin is a 405nm LCD UV-Curing photopolymer resin designed for high-precision 3D printing. This resin offers ease of use and post-processing due to its water-washable properties, low viscosity, and low odor. It is formulated to produce sturdy and tough printed parts, making it suitable for various models and prototyping applications.
Image: A bottle of Phrozen Water-Washable Rapid Black Resin positioned next to a highly detailed black 3D printed model, showcasing the resin's capability for intricate designs.
حفاظت جي ڄاڻ
When handling Phrozen Water-Washable Rapid Black Resin, it is crucial to follow safety guidelines to prevent direct skin contact and ensure proper disposal. Always work in a well-ventilated area.
- سفارش ٿيل گرمي پد: Maintain a working temperature between 20°C - 25°C for optimal resin performance.
- ذاتي حفاظتي سامان: Always wear gloves and a mask to avoid direct skin contact and inhalation of fumes.
- اسٽوريج: Keep the resin away from children, dust, and direct sunlight to maintain its quality and prevent premature curing.
- ايمرجنسي رابطو: In case of direct skin contact with resin, wash immediately with plenty of water. Seek medical attention if irritation persists.
- فضول خرچي: Do NOT dump waste water directly. Cure the waste water with sunlight OR add 10% Waste Disposal Agent and filter the residue before dumping. This ensures environmental safety.
Image: A bottle of Phrozen Water-Washable Rapid Black Resin with text overlay highlighting important safety precautions and usage tips, including recommended temperature, wearing PPE, and proper disposal.
سيٽ اپ ۽ تياري
- بوتل کي ڇڪيو: Before each use, shake the resin bottle well to ensure the photopolymer components are thoroughly mixed.
- پرنٽر تيار ڪريو: Ensure your 405nm LCD 3D printer is clean and ready for operation. Check the FEP film for any damage or residue.
- Pour Resin: Carefully pour the Phrozen Water-Washable Rapid Black Resin into the printer's resin vat. Avoid overfilling.
Image: A close-up of a hand pouring the black resin into the printer's vat, demonstrating the resin's low viscosity and ease of pouring.
آپريٽنگ هدايتون
Phrozen Water-Washable Rapid Resin is optimized for 405nm LCD printers, designed for fast printing without compromising quality.
- سلائيسر سيٽنگون: Refer to your 3D printer's specific slicer software for recommended exposure times and layer heights. For this resin, a recommended layer height is 30-100 µm.
- پرنٽ شروع ڪريو: Initiate the printing process according to your printer's instructions. The resin's rapid curing properties contribute to faster print times.
- مانيٽر پرنٽ: Observe the initial layers to ensure proper adhesion and formation.
Video: This video demonstrates the capabilities of Phrozen 3D printers and the precision achievable with their resins, including the ease of use and high-speed printing features. It showcases various applications, from artistic models to dental molds, highlighting the versatility of the Phrozen ecosystem.
سار سنڀال ۽ پوسٽ پروسيسنگ
Proper post-processing is essential for achieving the best results and durability from your prints.
- صفائي: Unlike standard resins, Phrozen Water-Washable Resin can be cleaned with water. Rinse the printed part thoroughly with water to remove uncured resin. For best results, use a soft brush or ultrasonic cleaner.
- خشڪ ڪرڻ: Ensure the cleaned part is completely dry before post-curing. You can use compressed air or allow it to air dry.
- پوسٽ علاج: Cure the cleaned and dried part under UV light (405nm) to achieve maximum hardness and strength. The resin is designed to be tough and non-brittle after proper curing.
- سپورٽ هٽائڻ: Printed parts are sturdy, allowing for easier support removal. Carefully remove supports using appropriate tools.
Image: A 3D printed model is shown being rinsed under flowing water, emphasizing the water-washable characteristic of the resin for easy cleanup.
Image: A side-by-side comparison of two ghost-shaped 3D printed models. One, labeled "phrozen", is smooth and intact, while the other, labeled "others", shows visible cracks, illustrating the superior toughness and non-brittle nature of Phrozen resin.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| پرنٽ بلڊ پليٽ تي عمل ڪرڻ ۾ ناڪام ٿئي ٿو | Insufficient bottom exposure time, cold resin/environment, dirty build plate. | Increase bottom exposure time. Ensure resin and room temperature are within 20-25°C. Clean and level the build plate. |
| Printed Part is Brittle | Insufficient post-curing, over-exposure during printing. | Increase post-curing time under UV light. Reduce normal exposure time slightly if over-exposure is suspected. |
| Sticky/Tacky Surface After Cleaning | Incomplete cleaning, insufficient drying before curing. | Rinse thoroughly with water, ensuring all uncured resin is removed. Ensure the part is completely dry before post-curing. |
| Poor Print Detail/Resolution | Incorrect layer height, resin not properly mixed, printer calibration issues. | Verify layer height settings (30-100 µm recommended). Shake resin bottle well before use. Calibrate your printer if necessary. |
پيداوار جي وضاحت
- وزن: 1KG per bottle
- XY قرارداد: 50 µm
- Recommended Layer Height: 30-100 µm
- Curing Wavelength: 405nm UV روشني
- Viscosity: گھٽ
- خوشبو: گھٽ
- خاصيتون: Water-Washable, Tough, Non-Brittle, Fast-Printing
- پيداوار جي ماپ: 3.5 x 3.5 x 8.2 انچ
- شيء جو وزن: 1 ڪلوگرام
- ٺاهيندڙ: PHROZEN TECH CO., LTD.
- تاريخ پهرين دستياب: 12 جون 2020
وارنٽي ۽ سپورٽ
For detailed warranty information, technical support, or further inquiries regarding your Phrozen Water-Washable Rapid Black Resin, please visit the official Phrozen webسائيٽ تي وڃو يا انهن جي ڪسٽمر سروس سان رابطو ڪريو. وارنٽي دعوائن لاءِ پنهنجي خريداري جي رسيد رکو.
Phrozen Official Webسائيٽ: www.phrozen3d.com
Amazon اسٽور: Phrozen Amazon Store
