Flexson Wall Mount for SONOS ERA100 - Black (Single) Instruction Manual

تعارف

This manual provides comprehensive instructions for the safe and proper installation and use of your Flexson Wall Mount for SONOS ERA100. Please read all instructions carefully before beginning installation.

The Flexson Wall Mount is designed to securely hold your SONOS ERA100 speaker, allowing for optimal sound positioning with its unique tilting mechanism and 80-degree swivel capability. It is constructed from durable alloy steel with a powder-coated finish.

پيڪيج مواد

انسٽاليشن کان اڳ، پڪ ڪريو ته سڀئي جزا موجود آهن:

• 1 x Flexson Wall Mount
• ھدايت وارو دستور
• فڪسنگ (اسڪرو، وال پلگ)
• Corner Adapter (optional use)

شڪل 1: ڌماڪو ٿيو view of the Flexson Wall Mount for SONOS ERA100, showing all included components and fixings for assembly.

حفاظت جي ڄاڻ

• Ensure the mounting surface can support the combined weight of the mount and the SONOS ERA100 speaker.
• انسٽاليشن دوران مناسب اوزار ۽ حفاظتي سامان استعمال ڪريو.
• If unsure about installation, consult a qualified professional.
• ننڍن حصن کي ٻارن کان پري رکو.

سيٽ اپ ۽ تنصيب

Follow these steps for proper installation of your Flexson Wall Mount:

1. جڳھ چونڊيو: Select a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing.
2. مارڪ ڊرلنگ پوائنٽس: Hold the wall bracket against the wall at the desired height and use a pencil to mark the drilling points.
3. سوراخ سوراخ: Drill pilot holes at the marked points. The size of the drill bit will depend on the type of wall and the provided wall plugs.
4. وال پلگ داخل ڪريو: Insert the appropriate wall plugs into the drilled holes.
5. ڀت جي بریکٹ کي ڳنڍيو: Secure the wall bracket to the wall using the provided screws. Ensure it is firmly attached.
6. Assemble Speaker Cradle: Attach the speaker cradle components as per the diagram, ensuring all screws are tightened.
7. ماؤنٽ اسپيڪر: Carefully place your SONOS ERA100 speaker into the assembled cradle. The mount can be inverted to hold the speaker upside down if desired.
8. Attach Speaker to Wall Bracket: Secure the speaker cradle with the speaker to the wall bracket. Ensure the locking mechanism is engaged.
9. پوزيشن کي ترتيب ڏيو: Adjust the speaker's tilt (up to 20 degrees down) and swivel (80 degrees) to achieve the desired sound direction.

شڪل 2: سامهون view of the Flexson Wall Mount securely holding a SONOS ERA100 speaker, demonstrating its discreet design.

شڪل 3: پاسي view of the mounted SONOS ERA100 speaker, highlighting the compact profile of the Flexson Wall Mount.

شڪل 4: زاويه view of the SONOS ERA100 speaker on the Flexson Wall Mount, showcasing its integration with the speaker's design.

آپريٽنگ هدايتون

Once installed, the Flexson Wall Mount allows for flexible positioning of your SONOS ERA100 speaker.

• جھڪڻ: The mount features a unique tilting mechanism. Gently adjust the speaker to tilt it downwards by up to 20 degrees to direct sound.
• گھمڻ: The mount allows for an 80-degree swivel (40 degrees left and 40 degrees right) to optimize sound direction. Carefully rotate the speaker to the desired angle.
• اُلٽي چڙهڻ: The design allows the speaker to be mounted upside down if required for specific aesthetic or acoustic needs.

شڪل 5: ويجهو وارو پاسو view illustrating the secure attachment and potential for adjustment of the SONOS ERA100 speaker on the Flexson Wall Mount.

سار سنڀال

The Flexson Wall Mount requires minimal maintenance.

• صفائي: Wipe the mount with a soft, dry cloth to remove dust. Avoid abrasive cleaners or solvents.
• وقتي چڪاس: Periodically check all screws and fixings to ensure they remain tight and secure.

مشڪلاتون

وضاحتون

وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the official Flexson webسائيٽ تي وڃو يا انهن جي ڪسٽمر سروس ڊپارٽمينٽ سان رابطو ڪريو. خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.

ٺاهيندڙ: فلڪسن

Webسائيٽ: Visit the Flexson Store on Amazon (عام برانڊ جي معلومات لاءِ)