DS18 PRO-HP52 2 انچ ايگزٽ هارن ويو گائيڊ هدايت نامو

1. تعارف

This manual provides essential information for the proper installation, operation, and maintenance of your DS18 PRO-HP52 2-inch Exit Horn Waveguide. Please read this manual thoroughly before installation and retain it for future reference.

2. پراڊڪٽ ختمview

The DS18 PRO-HP52 is a durable plastic horn waveguide designed for use with compatible 2-inch bolt-on compression drivers. It features a shorter style for versatile mounting and is constructed from ABS plastic for resistance to corrosion and physical damage. The horn is available in various chrome finishes.

Figure 1: DS18 PRO-HP52 2-inch Exit Horn Waveguide (Red/White Chrome color shown).

3. اهم خاصيتون

• ڪمپيڪٽ ڊيزائن: Features a mounting depth of 2.61 inches and a 2-inch throat diameter, allowing for installation in various spaces.
• پائيدار تعمير: Made from ABS Plastic for enhanced resistance to corrosion and physical damage.
• Bolt-on Compatibility: Designed to fit most 4-bolt pattern compression drivers.
• UV Resistant Finish: Chrome finish provides UV resistance and aesthetic appeal.
• Optimized Sound Dispersion: Engineered for directional sound projection.

Figure 2: Illustration of PRO-HP52 features, highlighting ABS plastic construction and 4-bolt pattern compatibility.

4. وضاحتون

Figure 3: Detailed dimensions of the PRO-HP52 horn waveguide.

5. تنصيب

The PRO-HP52 horn waveguide is designed for easy bolt-on installation with compatible 2-inch compression drivers. Ensure you have a suitable compression driver with a 4-bolt mounting pattern.

5.1 گھربل اوزار (شامل نه آھي)

• Appropriate wrench or socket set for mounting bolts.
• Screwdriver (if applicable for driver terminals).

5.2 تنصيب جا مرحلا

1. Carefully unpack the horn waveguide and inspect for any damage.
2. Align the mounting holes of the PRO-HP52 horn with the bolt pattern on your compatible 2-inch compression driver.
3. Insert the provided bolts (or bolts supplied with your compression driver) through the horn's mounting holes and into the compression driver.
4. Securely fasten the bolts, ensuring a snug fit without overtightening to prevent damage to the plastic.
5. Once the horn is attached to the driver, proceed with mounting the assembled unit into your desired enclosure or panel.

Figure 4: PRO-HP52 horn waveguides shown attached to various DS18 compression drivers, demonstrating bolt-on compatibility.

6. آپريٽنگ هدايتون

The PRO-HP52 horn waveguide functions as an acoustic amplifier and disperser for a connected compression driver. Its operation is dependent on the specifications and proper connection of the compression driver it is paired with.

• Ensure the compression driver is correctly wired to your audio system's amplifier according to the driver's specific instructions.
• Verify all connections are secure to prevent signal loss or damage.
• Start with low volume levels and gradually increase to your desired listening level to avoid overdriving the compression driver.

7. سار سنڀال ۽ سنڀال

• صفائي: نرم استعمال ڪريو، ڊيamp cloth to wipe the surface of the horn waveguide. Avoid abrasive cleaners or solvents that could damage the chrome finish.
• چڪاس: Periodically check the mounting bolts for tightness. Vibrations can sometimes loosen fasteners over time.
• اسٽوريج: If storing the unit for an extended period, keep it in a cool, dry place away from direct sunlight and extreme temperatures.

8. مسئلا حل ڪرڻ

This section addresses common issues that may arise during the use of the PRO-HP52 horn waveguide. Note that most audio performance issues are related to the connected compression driver or the audio system itself.

• آواز ناهي:
  • Check the wiring connections between the compression driver and the ampوierيڪ زنده
  • Verify the compression driver is functioning correctly (refer to its specific manual).
  • کي يقيني بڻايو ampلائفائر آن آهي ۽ سگنل وصول ڪري رهيو آهي.
• مسخ ٿيل آواز:
  • Reduce the volume level to check if the compression driver is being overdriven.
  • Inspect the compression driver for any physical damage or diaphragm issues.
  • Ensure the horn is securely attached to the driver.
• Loose Horn:
  • Tighten the mounting bolts connecting the horn to the compression driver. Do not overtighten.

9. وارنٽي ۽ سپورٽ

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your DS18 compression driver or visit the official DS18 webسائيٽ. وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.

DS18 Contact Information:

• Webسائيٽ: www.ds18.com
• Customer Service: Refer to the webموجوده رابطي جي طريقن لاءِ سائيٽ.