CooFel Spin Mop and Bucket System Instruction Manual

تعارف

Thank you for choosing the CooFel Spin Mop and Bucket System. This manual provides essential information for the proper assembly, operation, and maintenance of your new cleaning system. Please read all instructions carefully before use to ensure optimal performance and longevity of the product.

پيڪيج مواد

مھرباني ڪري تصديق ڪريو ته سڀئي جزا توھان جي پيڪيج ۾ موجود آھن:

• 1 x Mop Bucket with Wringer
• 1 x Detergent Dispenser Bottle
• 1 x Mop Base
• 1 x Stainless Steel Adjustable Handle (multi-piece assembly)
• 3 x Microfiber Mop Refills

Figure 1: All components included in the CooFel Spin Mop and Bucket System package.

سيٽ اپ جون هدايتون

1. Assemble the Mop Handle

1. Connect the three stainless steel handle pieces by screwing them clockwise until secure.
2. Attach the assembled handle to the mop base by sliding the bottom part of the handle into the designated slot on the mop base. Ensure it clicks into place securely.

2. Attach the Microfiber Mop Head

1. Lay the microfiber mop head flat on the floor.
2. Align the mop base over the mop head. Gently press the mop base onto the mop head until it snaps into place. Ensure all fabric loops are securely attached to the base.

Figure 2: Visual guide for assembling the telescopic handle and attaching the microfiber mop head to the mop base.

آپريٽنگ هدايتون

1. Filling the Bucket and Adding Detergent

• Fill the designated washing side of the bucket with water up to the indicated fill line.
• If desired, fill the detergent dispenser bottle with your preferred cleaning solution and pump it into the water compartment.

Figure 3: The integrated detergent dispenser allows for easy addition of cleaning solution to the water.

2. Wetting and Cleaning the Mop Head

1. Unlock the mop handle by sliding the red lever to the "ON" position.
2. Place the mop head into the water compartment of the bucket. Gently push the mop handle up and down to wet the mop head thoroughly.

3. Wringing and Drying the Mop Head

1. Transfer the wet mop head to the stainless steel wringer basket.
2. Push the mop handle up and down rapidly to activate the spinning mechanism. This will effectively wring out excess water from the mop head.
3. Lock the mop handle by sliding the red lever to the "OFF" position before mopping to prevent unwanted spinning.

Figure 4: The cleaning process involves wetting the mop head in the water compartment and then spinning it dry in the wringer basket.

4. ڇڪڻ

With the mop head adequately damp, proceed to clean your desired floor surfaces. The 360° rotating mop head allows for easy maneuverability around furniture and into corners.

5. Moving the Bucket

The bucket is equipped with two wheels and a retractable pull handle for easy transportation around your home. Simply extend the handle and tilt the bucket to roll it to your next cleaning area.

Video 1: Demonstration of the CooFel Spin Mop and Bucket System in use, highlighting the wetting and wringing functions, as well as the mobility features.

سار سنڀال

1. Draining Dirty Water

Once cleaning is complete, position the bucket over a drain (e.g., sink, bathtub). Locate the drainage plug on the side of the bucket and open it to release the dirty water. Close the plug tightly after draining.

Figure 5: The convenient drainage plug allows for easy and mess-free disposal of dirty water.

2. Cleaning Mop Heads

The microfiber mop heads are machine-washable and reusable. After use, detach the mop head from the base and wash it with similar colors. Air dry for best results.

3. اسٽوريج

Empty and rinse the bucket after each use. Store the mop and bucket in a dry place. The mop handle can be disassembled for compact storage if needed.

مشڪلاتون

• Mop Head Not Spinning: Ensure the mop handle is unlocked (red lever in "ON" position) before attempting to spin. Apply firm, consistent downward pressure when pushing the handle into the wringer basket.
• Bucket Wheels Not Rolling Smoothly: Check for any debris or obstructions around the wheels. Ensure the bucket is not excessively heavy, which might impede smooth movement.
• Mop Head Detaches During Use: Verify that the microfiber mop head is securely snapped onto the mop base, with all fabric loops properly engaged.

وضاحتون

وارنٽي ۽ سپورٽ

For any questions regarding your CooFel Spin Mop and Bucket System, please refer to the contact information provided at the point of purchase. Product quality and customer satisfaction are our top priorities. If you have any questions, please click "Contact Seller" on the product page for 24-hour customer service assistance.