JABLOTRON™ Nanny Monitor BM-02 Babyphone User Manual

1. تعارف

Thank you for choosing the JABLOTRON™ Nanny Monitor BM-02. This device is designed to monitor your baby's breathing movements and provide an early warning in case of irregularities. It is a certified medical device, offering peace of mind for parents. This manual provides essential information for the safe and effective use of your Nanny Monitor BM-02.

شڪل 1: The product packaging for the JABLOTRON Nanny Monitor BM-02, highlighting its certification as a medical device, early warning capabilities, and ease of operation.

2. اهم حفاظتي ڄاڻ

• سڀئي هدايتون پڙهو: Before using the Nanny Monitor BM-02, carefully read and understand all instructions in this manual.
• Not a medical device for diagnosis: This monitor is a breathing movement detector and is not intended to diagnose, treat, or cure any medical condition or disease. It is an aid for parents and caregivers.
• Professional medical advice: Always consult with a healthcare professional for any concerns regarding your baby's health.
• مناسب جڳهه: Ensure the sensor mat is placed correctly under the mattress and the main unit is securely attached to the crib, out of reach of the child.
• ڪيبل: Keep all cables and cords away from the baby's reach to prevent strangulation hazards.
• طاقت جو ذريعو: صرف ڊوائيس سان فراهم ڪيل پاور اڊاپٽر استعمال ڪريو.
• ماحولياتي حالتون: ڊوائيس کي انتهائي گرمي پد، سڌي سج جي روشني، يا گهڻي نمي جي سامهون نه رکو.
• صفائي: Clean the device only as instructed in the maintenance section.
• نگراني: The Nanny Monitor BM-02 is an aid and does not replace direct adult supervision of the child.

3. پيڪيج مواد

مھرباني ڪري پيڪيج جي مواد کي چيڪ ڪريو ته پڪ ڪريو ته سڀئي شيون موجود آھن ۽ محفوظ آھن:

• JABLOTRON Nanny Monitor BM-02 Main Unit
• Sensor Mat (1x)
• پاور اڊاپٽر
• استعمال ڪندڙ دستي
• Decorative Stickers (optional, for personalization)
• Antibacterial Tissues (for cleaning)

شڪل 2: هڪ اوور هيڊ view of all items included in the JABLOTRON Nanny Monitor BM-02 package, including the main unit, sensor mat, power adapter, and documentation.

4. سيٽ اپ گائيڊ

Follow these steps to set up your Nanny Monitor BM-02:

1. جڳھ چونڊيو: Select a stable and flat surface for the crib or bed where the baby will sleep.
2. Place Sensor Mat: Carefully place the sensor mat directly on the solid base of the crib, under the mattress. Ensure the mat is flat and centered where the baby will lie.


شڪل 3: The sensor mat of the JABLOTRON Nanny Monitor BM-02 correctly positioned underneath a baby's crib mattress.

3. مکيه يونٽ ڳنڍيو: Connect the cable from the sensor mat to the main Nanny Monitor BM-02 unit. Ensure the connection is secure.
4. Position Main Unit: Attach the main unit to the side of the crib using the integrated hanger, ensuring it is firmly secured and out of the baby's reach. Alternatively, place it on a stable surface near the crib.


شڪل 4: The JABLOTRON Nanny Monitor BM-02 main unit securely attached to the side of a baby crib.

5. پاور آن: Plug the power adapter into the main unit and then into a wall outlet. The device will perform a self-test, indicated by flashing lights.
6. شروعاتي ٽيسٽ: After powering on, place your hand on the mattress above the sensor mat and gently tap or press to simulate breathing movements. The green indicator light should illuminate, confirming detection.

5. آپريٽنگ هدايتون

The Nanny Monitor BM-02 is designed for simple operation. Once set up, it continuously monitors your baby's breathing movements.

اشارو بتيون:

• Green Light (Smiling Face): Indicates normal breathing movements are detected. This light will flash with each detected movement.
• Orange Light (Neutral Face): May indicate a weak signal or a need to check the sensor mat placement. Refer to troubleshooting if this persists.
• Red Light (Sad Face) & Audible Alarm: Activates if no breathing movement is detected for 20 seconds. This is a critical warning.
• Battery Indicator (Bottom Icon): Illuminates or flashes to indicate low battery power. Replace batteries promptly if applicable, or ensure power adapter is connected.

شڪل 5: The JABLOTRON Nanny Monitor BM-02 main monitoring unit, showing the indicator lights.

الارم جواب:

If the red light and audible alarm activate:

1. Immediately check on your baby.
2. If the baby is unresponsive, follow your pediatrician's instructions for emergency situations.
3. If the baby is fine, check the sensor mat placement and ensure no external vibrations are interfering with the monitor.

6. سار سنڀال

صفائي:

• هميشه صاف ڪرڻ کان اڳ پاور اڊاپٽر کي ختم ڪريو.
• Wipe the main unit and sensor mat with a soft, damp cloth. You may use the provided antibacterial tissues.
• گھڙڻ وارا صاف ڪندڙ، محلول، يا سخت ڪيميڪل استعمال نه ڪريو.
• Ensure the device is completely dry before reconnecting to power.

بيٽري مٽائڻ:

The Nanny Monitor BM-02 uses alkaline batteries (if not solely powered by adapter). When the battery indicator illuminates or flashes, replace the batteries immediately to ensure continuous operation. Refer to the battery compartment for specific battery type and replacement instructions.

7. مسئلا حل ڪرڻ

8. ٽيڪنيڪل وضاحتون

9. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the official JABLOTRON webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس سان رابطو ڪريو. ڪنهن به وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

JABLOTRON Official Webسائيٽ: www.jablotron.com (Please verify the exact support URL on the product packaging or official documentation).