GEEVON Wireless Pool Thermometer User Manual

تعارف

Thank you for choosing the GEEVON Wireless Pool Thermometer. This device provides accurate, remote temperature readings for various water environments such as swimming pools, hot tubs, spas, and bath water. It features a large display, high/low temperature alerts, and a backlight for easy readability. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.

پيداوار ختمview

The GEEVON Wireless Pool Thermometer system consists of two main components: a floating wireless sensor and an indoor receiver display unit.

اهم خاصيتون:

• وائرليس ٽرانسميشن: Up to 328 feet (100 meters) range.
• ملٽي چينل سپورٽ: Monitor up to 3 different water temperatures (additional sensors sold separately).
• درجه حرارت جي خبرداري: Programmable high and low temperature alarms.
• تاريخ جا رڪارڊ: 24-hour high and low temperature readings.
• وڏي LCD ڊسپلي: 4.9-inch screen with 10-second backlight.
• پنروڪ سينسر: IP67 rated with heavy-duty silicone sealing ring.
• يونٽ: فارنهائيٽ (°F) ۽ سيلسيس (°C) ٻنهي کي سپورٽ ڪري ٿو.
• اضافي افعال: الارم ڪلاڪ ۽ اسنوز فنڪشن.

Image: The indoor display unit showing current temperature, time, and indoor temperature, alongside the floating sensor in a pool. The display indicates high and low records, trend arrows, and temperature alerts.

Image: Detailed dimensions of both the floating sensor and the indoor receiver unit, highlighting the 4.9-inch display size.

سيٽ اپ جون هدايتون

Follow these steps to set up your GEEVON Wireless Pool Thermometer:

1. Install Batteries in Sensor:
   • Carefully twist the top part of the floating sensor counter-clockwise to open it.
   • Locate the channel selector switch (1, 2, or 3) inside the sensor. Set it to your desired transmission channel.
   • Insert the required batteries (not included) into the sensor, ensuring correct polarity.
   • Securely close the sensor by twisting the top clockwise until it is tightly sealed. Ensure the silicone sealing ring is properly seated to maintain waterproofing.
2. Install Batteries in Main Unit (Receiver):
   • Open the battery compartment on the back of the indoor receiver unit.
   • Insert the required batteries (not included) into the receiver, observing correct polarity.
   • بيٽري جي ڪمري کي بند ڪريو.
3. ڪنيڪشن قائم ڪريو:
   • Place the main unit and the sensor close to each other (within a few feet).
   • The receiver will automatically search for the sensor signal. This process may take 2-3 minutes.
   • Once connected, the water temperature from the sensor will appear on the receiver's display.
4. لڳائڻ:
   • Place the floating sensor directly into the water (pool, spa, hot tub).
   • Position the indoor receiver unit in a dry location within the wireless range (up to 328 feet/100 meters) of the sensor. Avoid placing it near large metal objects or electronic devices that may interfere with the signal.

Image: Visual instructions for installing batteries in both the sensor and the main unit, and the pairing process.

آپريٽنگ هدايتون

Reading Temperature:

The large LCD display on the receiver unit shows the current water temperature (from the sensor) and the indoor temperature. It also displays the time, high/low records, and temperature trends.

سوئچنگ گرمي پد يونٽ (°F/°C):

Press the °F/°C button (usually located on the back or side of the receiver) to toggle between Fahrenheit and Celsius temperature readings.

Backlight فنڪشن:

Press the "SNOOZE/LIGHT" button on the receiver unit to activate the soft white backlight for 10 seconds, improving visibility in low-light conditions.

Image: Illustration of the backlight feature, showing the display illuminated in both day and night settings.

Setting High/Low Temperature Alerts:

Refer to the specific buttons on your receiver unit (often labeled "ALERT" or similar) to set your desired high and low temperature thresholds. An audible alarm will sound if the water temperature exceeds or falls below these set points.

Viewتاريخ جو رڪارڊ:

The receiver automatically records the highest and lowest temperatures over a 24-hour period. Use the designated buttons (e.g., "MAX/MIN") to view اهي رڪارڊ.

Channel Switching (for multiple sensors):

If you have multiple sensors (sold separately), use the "CH" button on the receiver to switch between the different channels (CH1, CH2, CH3) to view their respective temperature readings.

Image: The indoor display unit showing channel selection, with examples of the floating sensor used in a swimming pool, hot tub, and spa.

وقت ۽ الارم سيٽنگون:

The receiver unit also functions as a clock with an alarm and snooze feature. Consult the buttons on your device for setting the time and alarm. Typically, buttons like "MODE" or "SET" are used for these adjustments.

سار سنڀال

• صفائي: The floating sensor and receiver unit can be cleaned with a soft, damp cloth. Do not use abrasive cleaners or immerse the receiver unit in water. The product care instructions specify "Hand Wash Only" for the sensor.
• بيٽري مٽائڻ: Replace batteries in both the sensor and receiver when the low battery indicator appears on the display. Ensure proper battery type and polarity.
• پنروڪ: Regularly inspect the silicone sealing ring on the floating sensor for any signs of wear or damage. A properly seated and intact sealing ring is crucial for maintaining the sensor's IP67 waterproof rating. If the seal is compromised, water ingress may occur.
• اسٽوريج: When not in use for extended periods, remove batteries from both units and store them in a cool, dry place.

مشڪلاتون

• No Temperature Reading on Receiver:
  • Check if batteries are correctly installed and not depleted in both the sensor and receiver.
  • Ensure the sensor and receiver are within the effective wireless range (up to 328 feet/100 meters) and there are no significant obstructions.
  • Verify that the sensor's channel switch matches the selected channel on the receiver.
  • Try re-pairing the units by removing and reinserting batteries in both, then placing them close together.
• غلط درجه حرارت پڙهڻ:
  • Ensure the sensor is fully submerged in the water and has been given sufficient time (1-2 minutes) to stabilize its reading.
  • Compare the reading with another reliable thermometer if available.
  • Check for any debris or buildup on the sensor probe that might affect accuracy.
• Water Inside Sensor:
  • Immediately remove the sensor from water and open it to dry thoroughly.
  • Inspect the silicone sealing ring for damage, cracks, or improper seating. Replace if necessary.
  • Ensure the sensor is closed tightly and correctly sealed before re-submerging.
• ڊسپلي ڪم نه ڪري رهيو آهي:
  • Check batteries in the receiver unit.
  • پڪ ڪريو ته يونٽ ڊگهي عرصي تائين انتهائي گرمي پد يا سڌي سج جي روشنيءَ ۾ نه رهي.

وضاحتون

وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Geevon website. If you encounter any issues not covered in this manual, please contact Geevon customer service for assistance.