Sarmert 3-Lead Hard-Wire Kit for Micro-USB Dash Cams

1. تعارف

This manual provides detailed instructions for the installation and operation of the Sarmert 3-Lead Hard-Wire Kit. This kit is designed to provide continuous power to your Micro-USB compatible dash camera, enabling features such as 24-hour parking monitoring and low voltage protection. It converts 12V-24V vehicle power to a stable 5V/2.5A output for your device.

شڪل 1: ختمview of the Sarmert 3-Lead Hard-Wire Kit and included fuse taps.

2. پراڊڪٽ ختمview ۽ خاصيتون

The Sarmert Hard-Wire Kit ensures your dash camera operates reliably with advanced power management features.

اهم خاصيتون:

• Automatic Parking Mode: Powers on and records automatically when the vehicle is accessed, supporting time-lapse or continuous recording.
• وسيع جلدtage مطابقت: Compatible with 12V-24V vehicles (cars, trucks, buses). Adjustable protection voltage سيٽنگون.
• 24/7 پارڪنگ مانيٽر: Provides constant power to the dash cam for continuous surveillance, protecting against theft.
• گھٽ وولٽtagاي تحفظ: Intelligent system automatically cuts power to prevent vehicle battery drain when voltage drops below 11.6V (for 12V systems) or 23.2V (for 24V systems).
• Micro-USB Compatibility: Designed for Micro-USB dash cams, GPS navigators, and radar detectors, freeing up the cigarette lighter port.

پيڪيج مواد:

• Sarmert 3-Lead Hard-Wire Kit with Micro-USB connector
• Assorted Fuse Taps
• Assorted Fuses
• مالڪ جو دستور (هي دستاويز)

Figure 2: Contents of the Sarmert Hard-Wire Kit package.

Figure 3: The 3-lead hard-wire kit provides multiple protections including battery drain, over-current, short-circuit, reverse connection, and overheat protection.

3. سيٽ اپ ۽ تنصيب

Proper installation is crucial for the hard-wire kit's functionality. If you are unfamiliar with vehicle electrical systems, it is recommended to seek professional assistance.

وائرنگ ڊراگرام:

The hard-wire kit consists of three main wires:

• ڪارو تار (GND): Connect to a metal bolt or screw on the vehicle chassis for ground.
• ڳاڙهو تار (ACC): Connect to a fuse in the fuse box that is only powered when the ignition is on (Accessory power).
• Yellow Wire (BAT+): Connect to a fuse in the fuse box that has constant power, even when the ignition is off (Battery power).

Figure 4: Hard-wire kit control box showing input and output cables, and connections for GND, ACC, and BAT+.

تنصيب جا مرحلا:

1. پنھنجي فيوز باڪس کي ڳولھيو: Refer to your vehicle's owner's manual to find the location of the fuse box. Common locations include under the dashboard, in the glove compartment, or under the hood.
2. Identify Fuse Slots: Using a circuit tester, identify a fuse slot that provides ACC power (on with ignition) for the Red wire and a fuse slot that provides constant BAT+ power (always on) for the Yellow wire.
3. Select Correct Fuse Type: Choose the appropriate fuse tap from the kit that matches the fuse type in your vehicle's fuse box.
4. Connect Wires to Fuse Taps: Insert the Red and Yellow wires into their respective fuse taps. Insert the original fuse into the lower slot of the fuse tap and a new fuse (matching the original's amperage) into the upper slot for the hard-wire kit.
5. Insert Fuse Taps: Plug the fuse taps into the identified ACC and BAT+ fuse slots.
6. Locate a Ground Point: Connect the Black (GND) wire to a secure metal bolt or screw on the vehicle's chassis that is free of paint or rust.
7. رستا ڪيبل: Carefully route the Micro-USB output cable to your dash camera, ensuring it does not interfere with driving controls or airbags. Conceal the cable behind trim panels for a clean installation.
8. ڊيش ڪيم سان ڳنڍيو: Plug the Micro-USB connector into your dash camera.
9. ٽيسٽ سسٽم: Start your vehicle to ensure the dash cam powers on. Turn off the vehicle and remove the key to verify the parking monitor mode activates (if enabled on your dash cam).

Figure 5: Visual guide for the hard-wire kit installation process within a vehicle.

4. آپريٽنگ هدايتون

Parking Monitor Mode:

Once correctly installed, the hard-wire kit enables your dash camera's parking monitor function. When your vehicle is turned off, the kit continues to supply power from the vehicle battery, allowing the dash cam to record in parking mode (e.g., time-lapse or motion detection, depending on your dash cam's features).

گھٽ وولٽtagاي تحفظ:

The hard-wire kit features an integrated low voltage protection system to prevent excessive drain on your vehicle's battery. If the vehicle battery voltage drops below a preset threshold, the kit will automatically cut power to the dash camera.

• For 12V batteries, power is cut at 11.6V, 12.0V, 12.2V, or 12.4V (user adjustable).
• For 24V batteries, power is cut at 23.6V, 24.0V, 24.4V, or 24.8V (user adjustable).

حفاظتي حجم کي ترتيب ڏيڻ لاءِtage, press and hold the '+' or '-' buttons on the hard-wire kit box for 3 seconds to display the current setting, then use the buttons to select the desired voltage. The digital display on the hard-wire kit box will show the current voltage سيٽنگ.

شڪل 6: گهٽ وولٽtage protection thresholds for 12V and 24V batteries.

5. سار سنڀال

• باقاعده چڪاس: Periodically inspect the wiring for any signs of wear, damage, or loose connections.
• Fuse Integrity: Ensure the fuses in the fuse taps are correctly seated and not blown. Replace blown fuses with ones of the same ampزمانو
• صفائي: Keep the hard-wire kit box and connections free from dust and moisture.
• ماحولياتي حالتون: Avoid exposing the kit to extreme temperatures or direct sunlight for prolonged periods, which could affect its lifespan.

6. مسئلا حل ڪرڻ

Figure 7: The hard-wire kit is compatible with Micro-USB devices, not USB-C or Mini-USB.

7. وضاحتون

8. وارنٽي ۽ سپورٽ

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Sarmert customer service directly. Keep your proof of purchase for any warranty claims.

You can visit the Sarmert store for more information: Sarmert Store