تعارف
ڊبليوampler Catacombs is a programmable, all-in-one delay and reverb pedal designed to provide a wide range of time-based effects for musicians. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Catacombs pedal.
پيداوار ختمview
The Catacombs pedal integrates 11 popular delay and reverb sounds into a single, intuitive unit. It features studio-quality 48 kHz sampling rate with 24-bit audio conversion, 8 onboard preset locations, and MIDI compatibility for up to 128 total presets.
شڪل 1: سامهون view جي Wampler Catacombs pedal, showing controls for delay and reverb effects, input/output jacks, and footswitches.
شڪل 2: زاويه view جي Wampler Catacombs pedal, highlighting its compact design and various control knobs.
سيٽ اپ ڪريو
بجلي جي گهرج
ڊبليوampler Catacombs pedal requires a standard 9V DC power supply (not included) with a center-negative barrel connector. Ensure the power supply provides sufficient current for optimal performance.
Connecting Your Pedal
- پنهنجي ساز (مثال طور، گٽار) کي سان ڳنڍيو مونو ان or اسٽيريو ان معياري 1/4 انچ جي اوزار ڪيبل استعمال ڪندي پيڊل جي ساڄي پاسي جيڪ.
- ڳنڍيو مونو اوٽ or اسٽريٽ آئوٽ پيڊل جي کاٻي پاسي تي جڪ توهان جي ampلائفائر يا ايندڙ اثر پيڊل.
- Connect the 9V DC power supply to the 9V ڊي سي ان پٽ جيڪ.
- For MIDI control, connect a MIDI cable to the MIDI ان پٽ.
آپريٽنگ هدايتون
ڪنٽرول ختمview
- Delay Type Knob: Selects between various delay types including Tape, SPC, FTE, BBD, ANLG, and DIGI.
- Reverb Type Knob: Selects between reverb types such as SHMR (Shimmer), PLT (Plate), SPR (Spring), ROOM, and HALL.
- Time/Shimmer Knob: Adjusts the delay time or shimmer intensity depending on the selected effect.
- Feedback/Decay Knob: Controls the number of delay repeats or the reverb decay time.
- Mod Rate Knob: Adjusts the modulation rate for effects with modulation.
- Delay Tone Knob: Shapes the tone of the delay repeats.
- Reverb Tone Knob: Shapes the tone of the reverb effect.
- Bypass/ALT Footswitch: Toggles the effect on/off. Hold to access alternate functions (ALT mode).
- Preset/Save Footswitch: Cycles through presets. Hold to save current settings to a preset location.
- Tap Tempo Footswitch: Taps in the desired delay tempo.
محفوظ ڪرڻ ۽ پري سيٽس کي ياد ڪرڻ
The Catacombs pedal allows for 8 onboard preset locations. To save a preset, adjust the knobs to your desired sound, then press and hold the Preset/Save footswitch until the indicator lights confirm the save. To recall a preset, short press the Preset/Save footswitch to cycle through the saved locations.
Alternate Functions (ALT Mode)
Some knobs have alternate functions accessible by holding the Bypass/ALT footswitch. When in ALT mode, the indicator light will change (e.g., from blue to red as noted in some user feedback), allowing you to adjust secondary parameters. Release the footswitch to return to normal operation.
سار سنڀال
To ensure the longevity and optimal performance of your Wampler Catacombs pedal, follow these maintenance guidelines:
- Keep the pedal clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- پيڊل کي سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري ٿڌي، سڪل جاءِ تي رکو.
- جڏهن گهڻي عرصي تائين استعمال ۾ نه هجي ته بجلي بند ڪريو.
- محفوظ فٽ لاءِ سڀني ڪيبل ڪنيڪشنن کي باقاعدي طور تي چيڪ ڪريو.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| جڏهن پيڊل لڳل هجي ته آواز نه ايندو. | Incorrect power supply, faulty cables, incorrect input/output connections. | Verify power supply is 9V DC center-negative. Check all instrument cables. Ensure input is connected to IN and output to OUT. |
| Effect is too subtle or too extreme. | Knobs are set incorrectly, or in ALT mode unintentionally. | Adjust the relevant control knobs (Time, Feedback, Tone). Check if the pedal is in ALT mode and adjust accordingly. |
| Cannot save or recall presets. | Incorrect footswitch operation. | Ensure you are holding the Preset/Save footswitch long enough to save. For recalling, use short presses. |
| Noise or hum. | Ground loop, faulty power supply, interference. | Use an isolated power supply. Try different cables. Ensure proper grounding of all equipment. |
وضاحتون
- ماڊل: CATACOMBS
- طول و عرض: 7.25 x 5.7 x 3.75 انچ
- شيء جو وزن: 1.39 پائونڊ
- طاقت جو ذريعو: Corded Electric (9V DC, center-negative, power supply not included)
- سگنل فارميٽ: اينالاگ
- Audio Output Effects: دير، ريورب
- Sampزبان جي شرح: 48 kHz
- Audio Bit Depth: 24-bit
- پيشڪش: 8 onboard, 128 via MIDI
- Manufacture Location: Designed and Built in the USA
وارنٽي ۽ سپورٽ
Wampler Pedals products are designed and built to high standards. For warranty information and technical support, please refer to the official Wampler pedals webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
وڌيڪ مدد لاء، دورو ڪريو جي Wampler Store on Amazon.
