Veepeak L14-30R

وي پيڪ 30 Amp Flanged Outlet NEMA L14-30R Instruction Manual

Model: L14-30R

تعارف

This manual provides essential information for the safe and proper installation, operation, and maintenance of your Veepeak 30 Amp Flanged Outlet NEMA L14-30R Locking Receptacle. Please read all instructions carefully before installation and use. Retain this manual for future reference.

حفاظت جي ڄاڻ

خبردار: Electrical shock hazard. Improper installation or use can result in serious injury or death. Always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.

  • Always disconnect power at the circuit breaker or fuse box before installing or servicing this device.
  • Ensure all wiring connections are secure and correct according to the wiring diagram and local codes.
  • ڊوائيس جي مخصوص برقي درجه بندي کان وڌيڪ نه ڪريو.
  • This product is designed for use with NEMA L14-30P compatible plugs only.
  • Keep the weatherproof cap closed when the outlet is not in use to protect against moisture and dust.

پيڪيج مواد

  • 1 x Veepeak 30 Amp NEMA L14-30R Flanged Outlet
  • تنصيب اسڪرو

وضاحتون

تفصيلقدر
Ampعمر30 Amps
جلدtage125/250 وولٽ اي سي
NEMA ترتيبL14-30R
Poles / Wires3 Pole, 4 Wire Grounding
وڌ ۾ وڌ لوڊ7500 واٽ
تجويز ڪيل وائر گيج10 AWG/4C
موادPolyvinyl کلورائڊ (PVC)
سرٽيفڪيشنETL Listed (Conforms to UL & CSA standards)
گهربل سوراخ جي ماپ2.5 انچ

سيٽ اپ ۽ تنصيب

اوزار گهربل: Screwdriver, wire strippers, drill (for mounting hole), appropriate drill bit.

  1. لڳائڻ جي جڳھ تيار ڪريو: Choose a suitable, dry location for installation. Drill a 2.5-inch diameter hole for the receptacle body. Ensure there is enough space behind the mounting surface for wiring connections.
  2. وائرنگ ڪنيڪشن:

    Refer to the wiring diagram below and the color-coded terminals on the back of the receptacle. Strip approximately 1/2 inch of insulation from each wire. Insert the wires into the corresponding terminals and tighten the screws securely. Ensure no bare wire strands are exposed outside the terminals.

    پوئتي view of the Veepeak L14-30R flanged outlet showing color-coded wiring terminals.

    تصوير: پوئين پاسي view of the L14-30R outlet, displaying the four color-coded terminals for wiring connections (Green for Ground, White for Neutral, Red and Black for Hot).

    NEMA L14-30R wiring diagram showing X, Y, W, G terminals for 125/250 Volt, 30 Amp ڪنيڪشن.

    Image: NEMA L14-30R configuration diagram. 'X' and 'Y' are hot lines (125V each to neutral, 250V between them), 'W' is neutral, and 'G' is ground.

    • Green (G): زميني تار.
    • اڇو (W): غير جانبدار تار.
    • Black (X): Hot wire (Line 1).
    • Red (Y): Hot wire (Line 2).
  3. Mount the Receptacle: Insert the receptacle body into the drilled hole. Secure the flanged outlet to the mounting surface using the provided screws. Ensure it is flush and stable.
  4. پاور بحال ڪريو: هڪ دفعو انسٽاليشن مڪمل ٿي وڃي ۽ سڀئي ڪنيڪشن تصديق ٿيل هجن، سرڪٽ بريڪر تي بجلي بحال ڪريو.
سامهون view of the Veepeak L14-30R flanged outlet with the weatherproof cap open, showing the locking receptacle.

تصوير: سامهون view of the Veepeak L14-30R flanged outlet with its weatherproof cap open, revealing the NEMA L14-30R locking receptacle.

آپريٽنگ هدايتون

  1. Opening the Cap: Lift the weatherproof cap to access the receptacle.
  2. پلگ ڳنڍڻ: Align the NEMA L14-30P plug with the receptacle. Insert the plug and twist clockwise to lock it into place. Ensure the plug is fully seated and locked.
  3. پلگ ڊسڪنيڪٽ ڪرڻ: Twist the plug counter-clockwise to unlock, then pull it straight out from the receptacle.
  4. Closing the Cap: When the outlet is not in use, ensure the weatherproof cap is securely closed over the receptacle to protect it from environmental elements like rain, snow, and dust.
سامهون view of the Veepeak L14-30R flanged outlet with the weatherproof cap closed, protecting the receptacle.

تصوير: سامهون view of the Veepeak L14-30R flanged outlet with its weatherproof cap securely closed, providing protection.

سار سنڀال

باقاعده سار سنڀال بهترين ڪارڪردگي ۽ حفاظت کي يقيني بڻائي ٿي.

  • صفائي: Periodically clean the exterior of the outlet with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the cap is closed during cleaning.
  • چڪاس: Regularly inspect the outlet for any signs of damage, wear, or corrosion. Check the weatherproof cap for proper sealing.
  • ڪنيڪشن چيڪ: Annually, or if issues arise, disconnect power and check the wiring connections for tightness. Loose connections can cause overheating.

مشڪلاتون

  • طاقت ناهي:
    • Check the circuit breaker or fuse for the circuit. Reset if tripped.
    • تصديق ڪريو ته طاقت جو ذريعو فعال آهي.
    • پڪ ڪريو ته پلگ مڪمل طور تي داخل ٿيل آهي ۽ رسيپٽيڪل ۾ بند ٿيل آهي.
  • لوز ڪنيڪشن:
    • If the plug feels loose or power is intermittent, disconnect power and inspect the wiring connections at the back of the receptacle for tightness.
    • Inspect the plug on the appliance for damage.
  • Damage to Outlet:
    • If the outlet housing or terminals show signs of damage, cracking, or burning, discontinue use immediately and replace the unit.

If troubleshooting steps do not resolve the issue, consult a qualified electrician.

وارنٽي ۽ سپورٽ

Veepeak provides a one-year hassle-free replacement warranty for this product. For warranty claims or customer service inquiries, please contact Veepeak customer support through the retailer where the product was purchased or visit the official Veepeak webسائيٽ.

لاڳاپيل دستاويز - L14-30R

اڳيview FAQs und Fehlerbehebung für Veepeak OBDCheck VP11
Umfassende FAQs und detaillierte Fehlerbehebung für den Veepeak OBDCheck VP11 (V2.2509). Finden Sie Antworten auf häufige Fragen zur Kompatibilität, Verbindung und Nutzung mit verschiedenen Fahrzeugen und Apps.
اڳيview OBDCheck BLE+ (PLUS) V3.2601: FAQ & Troubleshooting Guide
Comprehensive FAQ and troubleshooting guide for the Veepeak OBDCheck BLE+ (PLUS) V3.2601 OBD-II scanner. Covers vehicle compatibility, app usage, connection issues, and common problems for iOS and Android devices.
اڳيview OBDCheck BLE FAQ ۽ مسئلا حل ڪرڻ جي گائيڊ
ويپيڪ او بي ڊي چيڪ بي ايل او بي ڊي-II اسڪينر لاءِ جامع سوالن جا جواب ۽ مسئلا حل ڪرڻ جي گائيڊ. ايپ مطابقت، گاڏين جي مدد، ڪنيڪشن جي مسئلن، ۽ استعمال بابت عام سوالن جا جواب ڳوليو.
اڳيview Veepeak OBDCheck BLE استعمال ڪندڙ هدايتون
ويپيڪ او بي ڊي چيڪ بي ايل اي بلوٽوٿ او بي ڊي II اسڪينر لاءِ استعمال ڪندڙ هدايتون، گاڏي جي مطابقت، ايپ سفارشون، سيٽ اپ گائيڊ، اڪثر پڇيا ويندڙ سوال، مسئلو حل ڪرڻ، وارنٽي، ۽ دستبرداري شامل آهن.
اڳيview ويپيڪ او بي ڊي چيڪ وي پي 11 استعمال ڪندڙ هدايتون ۽ گائيڊ
ويپيڪ او بي ڊي چيڪ وي پي 11 او بي ڊي-II اسڪين ٽول لاءِ جامع صارف هدايتون، جيڪي گاڏي جي مطابقت، ايپ سفارشون، سيٽ اپ، اڪثر پڇيا ويندڙ سوال، مسئلو حل ڪرڻ، ۽ وارنٽي جي معلومات کي ڍڪينديون آهن.
اڳيview VEEPEAK OBDCheck VP11 يوزر مينوئل: خاصيتون، سيٽ اپ، ۽ ٽربل شوٽنگ گائيڊ
VEEPEAK OBDCheck VP11 بلوٽوٿ OBD2 تشخيصي اسڪينر لاءِ جامع صارف دستياب. ان جي خاصيتن، سيٽ اپ هدايتن، مطابقت رکندڙ گاڏين ۽ ايپس، مسئلا حل ڪرڻ جا طريقا، ۽ سپورٽ معلومات بابت سکو.