فروزن سونڪ ميگا 8K S LCD/MSLA رين 3D پرنٽر يوزر مينوئل

1. تعارف

توهان جي نئين لاءِ يوزر مينوئل ۾ ڀليڪار phrozen Sonic Mega 8K S LCD/MSLA Resin 3D Printer. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your printer to ensure optimal performance and longevity. Please read this manual thoroughly before operating the device.

2. حفاظت جي ڄاڻ

توهان جي حفاظت تمام گهڻي آهي. مھرباني ڪري ھيٺ ڏنل حفاظتي ھدايتن تي عمل ڪريو:

• Always operate the printer in a well-ventilated area to avoid inhaling resin fumes.
• Wear appropriate personal protective equipment (PPE), including نائٽرائل دستانا ۽ حفاظتي چشما, when handling liquid resin or uncured prints.
• Avoid direct skin and eye contact with liquid resin. In case of contact, wash immediately with soap and water. Seek medical attention if irritation persists or if resin gets into eyes.
• Keep resin away from direct sunlight and heat sources. Store it in a cool, dark place in its original sealed container.
• Do not dispose of liquid resin down drains. Cure any waste resin under UV light before disposing of it as solid waste according to local regulations.
• پڪ ڪريو ته پرنٽر هڪ مستحڪم، هموار سطح تي رکيل آهي.
• آپريشن دوران هلندڙ حصن کي هٿ نه ڪريو.
• ڪنهن به سار سنڀال يا صفائي ڪرڻ کان اڳ پرنٽر کي پاور آئوٽليٽ مان ان پلگ ڪريو.

3. پيڪيج مواد

انباڪسنگ ڪرڻ تي، مھرباني ڪري تصديق ڪريو ته ھيٺ ڏنل سڀ شيون شامل آھن:

• phrozen Sonic Mega 8K S 3D Printer
• پليٽ ٺاهيو
• رال وات
• پاور اڊاپٽر ۽ ڪيبل
• USB Drive (with user manual and test files)
• Gloves (as listed in "whats_in_the_box")
• پلاسٽڪ اسڪراپر
• ڌاتو ڇڪڻ وارو
• ڪفن
• Spare FEP Film
• Tool Kit (Allen wrenches, screws)

4. پراڊڪٽ ختمview

The phrozen Sonic Mega 8K S is a high-resolution LCD/MSLA resin 3D printer designed for rapid production and intricate detail. It features a large 15-inch monochrome LCD screen and a spacious build volume, making it ideal for printing multiple models or large-scale projects.

اهم خاصيتون:

• Unparalleled Productivity: High-speed system and large build plate allow for efficient batch printing, such as 80 detailed 1/32 scale models in under 1.5 hours.
• Revolutionary Production Efficiency: Combined with advanced ACF film and potent TR300 Resin, achieve speeds up to ten times faster than mid-size printers.
• Streamlined Convenience with Lift-Up Lid: The ingenious lift-up lid design optimizes space utilization and provides easy access to prints.
• Efficient Resin Management: A built-in metal drip hanger helps preserve resin post-printing and ensures safety during build plate cleaning.
• Exquisite 8K Printing Precision: Achieve extraordinary levels of intricacy with 8K resolution, capturing every nuance without compromising efficiency.

Figure 4.1: Phrozen Sonic Mega 8K S 3D Printer with a large printed model.

Figure 4.2: Key features of the Phrozen Sonic Mega 8K S.

Figure 4.3: Mass production capability with the 15-inch building plate.

Figure 4.4: Comparison of specifications between Sonic Mega 8K S and Sonic Mighty 8K.

سرڪاري پراڊڪٽ وڊيو:

وڊيو 4.1: سرڪاري پراڊڪٽ ختمview of the phrozen Sonic Mega 8K S, showcasing its features and capabilities.

5. سيٽ اپ

Follow these steps for the initial setup of your printer:

1. ان باڪسنگ: Carefully remove the printer and all accessories from the packaging. Inspect for any damage during transit.
2. لڳائڻ: Place the printer on a stable, level surface in a well-ventilated area, away from direct sunlight and heat.
3. پاور ڪنيڪشن: Connect the power adapter to the printer and then to a suitable power outlet. Do not power on yet.
4. بلڊ پليٽ انسٽال ڪريو: بلڊ پليٽ کي Z-محور بازو تي محفوظ ڪريو. پڪ ڪريو ته اهو مضبوطيءَ سان ڳنڍيل آهي.
5. رال ويٽ انسٽال ڪريو: Place the resin vat onto the LCD screen platform. Ensure it is seated correctly and securely.
6. Z-Axis Calibration (Leveling):
   • Loosen the screws on the build plate.
   • Place a sheet of A4 paper (or the calibration card provided) on the LCD screen.
   • Lower the build plate until it firmly presses against the paper.
   • Tighten the build plate screws while maintaining pressure.
   • Raise the build plate slightly and remove the paper.
   • Confirm the Z-axis home position through the printer's touchscreen menu.
7. رال لوڊ ڪندي: هڪ ڀيرو برابر ٿيڻ کان پوءِ، احتياط سان گهربل رال کي رال ويٽ ۾ وجھو، پڪ ڪريو ته اهو وڌ ۾ وڌ ڀرڻ واري لائن کان وڌيڪ نه هجي.

6. آپريٽنگ هدايتون

To begin printing, follow these general steps:

1. 3D ماڊل تيار ڪريو: Use a compatible slicing software (e.g., Chitubox, Lychee Slicer) to prepare your 3D model. This involves adding supports, orienting the model, and setting print parameters (layer height, exposure time, lift speed, etc.) according to your resin and desired print quality.
2. سلائس ماڊل: Slice the prepared model into layers and save it as a `.ctb` or compatible file format onto the provided USB drive.
3. USB ڊرائيو داخل ڪريو: پرنٽر جي USB پورٽ ۾ USB ڊرائيو داخل ڪريو.
4. Select and Start Print: On the printer's touchscreen, navigate to the "Print" menu, select your file, and confirm to start the printing process.
5. مانيٽر پرنٽ: Observe the first few layers to ensure proper adhesion to the build plate. The printer will automatically proceed with the print.
6. پوسٽ پروسيسنگ: Once printing is complete, carefully remove the build plate. Use the metal scraper to detach the print from the build plate. Place the build plate on the drip hanger to allow excess resin to drip back into the vat.
7. Wash and Cure: Wash the uncured print in isopropyl alcohol (IPA) or a dedicated resin cleaner to remove excess liquid resin. After washing, cure the print under UV light (e.g., in a UV curing station) to fully harden it.

7. سار سنڀال

Regular maintenance ensures consistent print quality and extends the life of your printer:

• صاف بلڊ پليٽ: After each print, clean the build plate with IPA and a soft cloth.
• صاف رال ويٽ: If changing resin colors or if there are cured resin bits in the vat, carefully empty the resin into a separate container (filter if necessary) and clean the vat with IPA and a soft cloth. Inspect the FEP film for damage.
• Inspect FEP Film: Regularly check the FEP film at the bottom of the resin vat for scratches, dents, or cloudiness. Replace it if damaged to prevent print failures and protect the LCD screen.
• صاف LCD اسڪرين: If resin spills onto the LCD screen, immediately clean it with a soft, lint-free cloth and IPA. Avoid using sharp objects or abrasive materials.
• Lubricate Z-Axis: Periodically apply a small amount of lithium grease to the Z-axis lead screw to ensure smooth movement.
• فرم ويئر اپڊيٽس: Check the official phrozen webڪارڪردگي بهتر ڪرڻ ۽ نوان فيچر شامل ڪرڻ لاءِ ڪنهن به موجود فرم ويئر اپڊيٽ لاءِ سائيٽ.

8. مسئلا حل ڪرڻ

هتي ڪجھ عام مسئلا ۽ انهن جا امڪاني حل آهن:

9. وضاحتون

10. وارنٽي ۽ سپورٽ

For detailed warranty information and technical support, please refer to the official phrozen webسائيٽ يا جامع يوزر مينوئل (PDF) provided with your printer. You may also contact Phrozen 3D Printer customer support for assistance.

The product is sold by Phrozen 3D Printer and is fulfilled by Amazon. It typically comes with a 30-day easy return policy.