SunSun XBL-600 Hang-On External Filter Instruction Manual

1. تعارف

The SunSun XBL-600 Hang-On External Filter is designed for effective aquarium water filtration. It features a compact design, strong water flow, and an anti-dry burning mechanism for safety. This filter allows for flexible placement of filtration materials to suit specific user needs.

Figure 1: Assembled SunSun XBL-600 Hang-On External Filter.

2. وضاحتون

3. سيٽ اپ ۽ تنصيب

1. انپيڪ اجزاء: Carefully remove all filter components and accessories from the packaging. Ensure all parts listed in the manual are present.
2. Prepare Filter Media: The filter is designed for effective filtration, and materials can be placed freely according to your needs. Refer to the diagram below for the typical flow path through the media.


Figure 2: Internal media flow diagram. Water enters from the left, passes through mechanical filtration (sponges), then biological media (rings/balls), and exits on the right.

3. Assemble Inlet and Outlet Tubes: Connect the water inlet and outlet components as shown in the product diagrams. These components are designed for easy disassembly.
4. Mount the Filter: Hang the filter securely on the edge of your aquarium.
5. پاڻي جي وهڪري کي ترتيب ڏيو: Adjust the water inlet and outlet positions to ensure optimal water circulation within the aquarium.
6. پرائمنگ: The filter features an anti-dry burning design, which provides protection if operated without water. However, ensure the filter is properly primed with water before connecting to power for optimal performance.

4. آپريشن

Once installed and primed, connect the filter to a power source. The filter will begin operating, providing a strong water flow for effective filtration. The XBL-600 model is designed for quiet and efficient operation.

• وهڪري جي شرح: The filter operates at a flow rate of 132 Gph (gallons per hour).
• Oil Absorption: The filter includes an oil absorption function, which helps to remove surface films from the water, improving clarity.
• Anti-Dry Burning: The filter is equipped with a no-water protection, anti-dry burning design to prevent damage if the water level drops too low.

5. سار سنڀال

Regular maintenance is crucial for the longevity and efficiency of your filter. The filter's design allows for easy access to media for cleaning or replacement.

1. بجلي بند ڪريو: Always unplug the filter from the power source before performing any maintenance.
2. Remove Filter from Aquarium: Carefully lift the hang-on filter from the aquarium.
3. جدا ڪرڻ ۽ صاف ڪرڻ: Open the filter housing and remove the filtration media. Rinse mechanical media (sponges) with old aquarium water to preserve beneficial bacteria. Replace chemical media (e.g., activated carbon) as recommended by the manufacturer or as needed. Clean the impeller and motor housing to prevent blockages.
4. ٻيهر گڏ ڪرڻ: Reassemble the filter in reverse order, ensuring all seals are properly seated to prevent leaks.
5. Reinstall and Prime: Hang the filter back on the aquarium, ensure water levels are adequate, and prime the filter before reconnecting to power.

6. مسئلا حل ڪرڻ

• گھٽ وهڪري:
  • Check if filter media is clogged and requires cleaning or replacement.
  • Inspect the impeller for debris or damage.
  • Ensure inlet and outlet tubes are free from obstructions.
• طاقت ناهي:
  • Verify the power cord is securely plugged into a working outlet.
  • ٽرپ ٿيل سرڪٽ بريڪر جي جانچ ڪريو.
• ليڪ ٿيڻ:
  • Ensure the filter housing is correctly assembled and latches are secure.
  • Check all O-rings and gaskets for proper seating and damage. Replace if necessary.
  • Verify hose connections are tight.
• غير معمولي شور:
  • Air trapped in the filter: Gently tilt the filter to release trapped air.
  • Impeller issue: Inspect the impeller for foreign objects or wear.

7. وارنٽي ۽ سپورٽ

For warranty information, technical support, or replacement parts, please contact SunSun customer service. Keep your purchase receipt as proof of purchase.