ليول ون FCS-5202 جيميني 4 ايم پي فڪسڊ آئي پي ڪئميرا يوزر مينوئل

1. تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of the LevelOne FCS-5202 Gemini 4 MP Fixed IP Camera. The FCS-5202 is an outdoor fixed camera designed for reliable and cost-effective IP surveillance networks. It is built to withstand various environmental conditions, including rain, extreme heat, snow, dust, and humidity. This camera delivers clear 4-megapixel resolution images and supports 802.3af Power over Ethernet (PoE) for combined power and data transmission over a single Cat.5 cable.

2. پراڊڪٽ ختمview

2.1 اهم خاصيتون

• 4 Megapixel High-Definition Resolution for clear and sharp images.
• Supports H.264, H.265, and MJPEG video compression for efficient storage and streaming.
• Integrated 802.3af Power over Ethernet (PoE) for simplified installation with a single cable.
• IP67 Weather-Resistant Casing ensures durability in outdoor environments.
• Advanced Motion Detection capabilities, including intrusion, camera tampering, and line crossing detection.
• Event notification support for immediate alerts.

2.2 پيڪيج مواد

• LevelOne FCS-5202 IP Camera
• Installation Guide (refer to this manual)
• چڙهڻ جو سامان

2.3 ڪئميرا ڊراگرام

شڪل 1: اڳيان ۽ پاسي view of the LevelOne FCS-5202 Gemini 4 MP Fixed IP Camera, showing the lens, IR LEDs, and mounting bracket.

3. سيٽ اپ ۽ تنصيب

3.1 حفاظتي احتياط

• انسٽاليشن يا سار سنڀال کان اڳ پڪ ڪريو ته بجلي بند ٿيل آهي.
• Install the camera in a location that provides optimal viewing and is protected from direct impact.
• Use appropriate tools and follow local electrical codes.

3.2 جسماني تنصيب

1. چڙهڻ جو هنڌ چونڊيو: Select a suitable outdoor location, preferably under an overhang, that offers a clear field of view and is within reach of a network cable with PoE.
2. بریکٹ جبل: Use the provided mounting accessories to securely attach the wall mount bracket to the chosen surface. Mark and drill pilot holes as necessary.
3. ڪئميرا ڳنڍيو: Secure the camera to the mounting bracket. Adjust the camera's angle and orientation for the desired coverage.

3.3 نيٽ ورڪ ۽ پاور ڪنيڪشن

1. ايٿرنيٽ ڪيبل ڳنڍيو: Connect a Cat.5 or higher Ethernet cable from your PoE-enabled switch or PoE injector to the camera's Ethernet port. This single cable will provide both power and data.
2. پاور آن: Once the Ethernet cable is connected to a PoE source, the camera will power on automatically. Allow a few minutes for the camera to boot up.

3.4 شروعاتي ترتيب

1. ڪئميرا دريافت ڪريو: Use the LevelOne IP Camera Finder tool (available on the LevelOne website) or a network scanner to locate the camera's IP address on your network.
2. پهچ Web انٽرفيس: کوليو a web browser and enter the camera's IP address. You will be prompted to enter a username and password. Refer to the default credentials provided in the camera's packaging or on the manufacturer's webسائيٽ.
3. ڊفالٽ سندون تبديل ڪريو: For security purposes, immediately change the default username and password to strong, unique credentials.
4. نيٽ ورڪ سيٽنگون: Configure network settings such as static IP address (recommended for surveillance devices), subnet mask, gateway, and DNS servers as per your network requirements.
5. تاريخ ۽ وقت: صحيح تاريخ ۽ وقت مقرر ڪريو، ترجيحي طور تي اين ٽي پي سرور سان هم وقت سازي ڪندي.

4. آپريٽنگ هدايتون

4.1 زنده View

After logging into the camera's web interface, navigate to the "Live View" section to see the real-time video feed from the camera. You can typically adjust stream quality and view options here.

4.2 وڊيو رڪارڊنگ

• مسلسل رڪارڊنگ Configure the camera to record video continuously to a Network Video Recorder (NVR) or network-attached storage (NAS).
• واقعي جي ڪري ٿيندڙ رڪارڊنگ: Set up recording to activate only when specific events occur, such as motion detection.
• مقرر ڪيل رڪارڊنگ. Define specific time periods for recording.

4.3 Motion Detection and Event Management

1. Configure Detection Zones: ڪئميرا جي سيٽنگن ۾، ڪئميرا جي اندر مخصوص علائقن کي بيان ڪريو view جتي حرڪت جي ڳولا فعال هجڻ گهرجي.
2. حساسيت سيٽنگون: Adjust the sensitivity of motion detection to minimize false alarms.
3. واقعا عمل: Specify actions to be taken when an event is detected, such as:
   • Sending email notifications.
   • Uploading recorded video clips to an FTP server.
   • Triggering an alarm output (if available).

4.4 ريموٽ رسائي

To access your camera remotely, you may need to configure port forwarding on your router or use a cloud-based service provided by LevelOne or a third-party NVR. Consult your router's manual or network administrator for port forwarding instructions.

5. سار سنڀال

5.1 ڪئميرا صاف ڪرڻ

• ڪئميرا لينس ۽ هائوسنگ کي باقاعدي طور تي نرم، ڊي سان صاف ڪريوamp cloth to remove dust, dirt, and water spots.
• Do not use harsh chemicals or abrasive cleaners, as these can damage the lens or casing.
• صفائي ڪرڻ کان اڳ پڪ ڪريو ته ڪئميرا بند آهي.

5.2 فرم ویئر تازه ڪاريون

Periodically check the LevelOne official website for firmware updates. Firmware updates can provide new features, improve performance, and enhance security. Follow the instructions provided with the firmware update package carefully.

6. مسئلا حل ڪرڻ

7. وضاحتون

8. وارنٽي ۽ سپورٽ

For warranty information, please refer to the documentation provided with your purchase or contact your reseller. LevelOne provides technical support for its products. For assistance, please visit the official LevelOne webسائيٽ يا انهن جي ڪسٽمر سروس کاتي سان رابطو ڪريو.

آن لائين وسيلا:

• LevelOne Official Webسائيٽ: www.level1.com
• پراڊڪٽ سپورٽ صفحو: ڳولھيو FCS-5202 on the LevelOne website for drivers, firmware, and FAQs.