Scheppach ACS4000 Paint Spray System

1. تعارف

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Scheppach ACS4000 Airless Paint Spray System. Please read this manual thoroughly before initial use and keep it for future reference. Proper use and maintenance will ensure optimal performance and extend the lifespan of your equipment.

Image 1.1: Scheppach ACS4000 Airless Paint Spray System. This image shows the complete paint spray system, including the main unit, spray gun, and hoses, set up for operation.

2. حفاظت جي ڄاڻ

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This equipment operates under high pressure and with flammable materials.

عام حفاظتي ھدايتون:

• سڀئي هدايتون پڙهو: سامان جي ڪنٽرول ۽ صحيح استعمال سان پاڻ کي واقف ڪريو.
• ذاتي حفاظتي سامان (پي پي اي) پائڻ: Always wear safety glasses, a respirator mask, gloves, and protective clothing.
• وينٽيليشن: Ensure adequate ventilation in the work area to prevent the accumulation of flammable vapors.
• ٻرندڙ مواد: Do not spray flammable materials near open flames, pilot lights, or other ignition sources.
• برقي حفاظت: Ensure the power cord is in good condition and connected to a grounded outlet. Do not operate in wet conditions.
• تيز دٻاءُ جو خطرو: Never point the spray gun at yourself or others. High-pressure fluid can cause serious injury. Always engage the trigger lock when not spraying.
• ٻار ۽ تماشائي: ٻارن ۽ ويهندڙن کي ڪم واري علائقي کان پري رکو.
• سار سنڀال: Disconnect power before cleaning, servicing, or changing parts.

3. پراڊڪٽ ختمview

The Scheppach ACS4000 is an airless paint spray system designed for efficient and uniform application of various coatings on both smooth and textured surfaces, suitable for indoor and outdoor projects.

اهم خاصيتون:

• طاقتور موٽر: 550W electric motor with high-quality copper winding.
• ورسٽائل ايپليڪيشن: Suitable for thick and thin paints, latex, varnishes, water-based glazes, and dispersion wall paints.
• وڌايل پهچ: 9-meter spray hose for a large working radius.
• Direct Suction: Aspirates paint directly from the paint bucket via a filter tip on the suction hose.
• Adjustable دٻاء: Maximum working pressure of 110 bar, adjustable in 5 levels via a pressure regulator.
• Nozzle Variety: Includes 2 nozzles for thick (517) and thin (311) materials.
• Ergonomic ڊيزائن: Stable frame, soft-touch carrying handle, and a paint gun with a lock function for fatigue-free operation.
• مربوط اسٽوريج: Compartment for nozzles.

Image 3.1: Application Examples. This image illustrates various surfaces and materials suitable for the paint spray system, including wood, metal, interior walls, and exterior fences.

Image 3.2: Detailed Application Examples. This image shows the sprayer being used for glazing wooden furniture, painting metal, painting wood, and interior wall painting.

4. سيٽ اپ

Follow these steps to prepare your Scheppach ACS4000 for operation.

4.1 پيڪنگ ۽ اسيمبلي:

1. احتياط سان پيڪنگنگ مان سڀني اجزاء کي هٽايو.
2. Assemble the main unit according to the diagrams in the separate assembly guide (if provided). Ensure all connections are secure.
3. Connect the 9-meter spray hose to the main unit and the spray gun. Tighten connections firmly.
4. Attach the suction hose with the filter tip to the main unit.

4.2 Preparing the Paint:

1. Ensure the paint is suitable for airless spray systems. Refer to the paint manufacturer's instructions for thinning recommendations.
2. رنگ کي چڱي طرح ملايو.
3. Place the suction hose directly into the paint bucket. Ensure the filter tip is fully submerged.

4.3 Nozzle Selection:

The system includes two nozzles for different material viscosities:

• نوزل 311: For thin materials (water-dilutable and solvent-based glazes, lacquers, or oils).
• نوزل 517: For thick materials (latex paints, dispersion, or weather protection paints).

Select the appropriate nozzle for your paint and attach it securely to the spray gun.

Image 4.1: Nozzle Selection. This image displays the two types of nozzles provided, indicating their use for thick and thin materials.

Image 4.2: Filter Insert. This image shows the filter insert, which ensures even paint application and prevents clogging.

5. آپريٽنگ هدايتون

Understand the operational modes and pressure settings for effective spraying.

5.1 Powering On and Priming:

1. پاور ڪنڊ کي گرائونڊ ٿيل برقي آئوٽ سان ڳنڍيو.
2. Set the function switch to the "Prime" mode. This mode is used to pre-fill the paint and relieve pressure.
3. Allow the system to draw paint until it flows smoothly through the return hose into the paint bucket.
4. Once primed, switch the function to "Spray" mode.

Image 5.1: Function Switch. This image shows the function switch used to toggle between 'Prime' (pre-fill paint, pressure relief) and 'Spray' (paint application) modes.

5.2 Adjusting Pressure:

The working pressure can be adjusted in 5 levels using the pressure regulator dial.

1. Start with a lower pressure setting and gradually increase until the desired spray pattern is achieved.
2. Higher viscosity paints typically require higher pressure settings.

Image 5.2: Pressure Regulator Dial. This image shows the dial for adjusting the maximum working pressure of 110 bar in 5 levels.

5.3 Spraying Technique:

• Hold the spray gun perpendicular to the surface, maintaining a consistent distance (typically 25-30 cm).
• Move the gun in smooth, even strokes, overlapping each pass by about 50%.
• رنگ جي ٺهڻ کان بچڻ لاءِ هر اسٽروڪ جي آخر ۾ ٽرگر کي ڇڏي ڏيو.
• Utilize the trigger lock function for extended spraying periods to reduce fatigue.

Image 5.3: Spray Gun Lock Function. This image highlights the lock function on the spray gun, designed for comfortable, fatigue-free operation during long work sessions.

Image 5.4: User in Action. This image shows a person wearing protective gear while operating the Scheppach ACS4000 paint spray system, demonstrating proper usage.

6. سار سنڀال

Regular cleaning and maintenance are crucial for the longevity and performance of your paint spray system.

6.1 Cleaning After Use:

1. دٻاءُ گهٽائڻ: Always turn off the unit and relieve pressure by switching to "Prime" mode and triggering the gun into a waste container until no more paint is expelled.
2. فلش سسٽم: Remove the suction hose from the paint and place it into a bucket of appropriate cleaning solution (water for water-based paints, mineral spirits for oil-based paints).
3. گردش صاف ڪندڙ: Turn the unit on and spray the cleaning solution into a waste container until it runs clear.
4. صاف اجزاء: Disassemble the nozzle, filter, and spray gun tip. Clean them thoroughly with the appropriate cleaning solution and a brush.
5. صاف ڪريو: Wipe the exterior of the unit and hoses with a damp ڪپڙو.
6. اسٽوريج: Store the cleaned components and unit in a dry, safe place.

6.2 فلٽر جي سار سنڀال:

Regularly inspect and clean the filter on the suction hose and the filter within the spray gun to prevent clogging and ensure consistent spray quality.

7. مسئلا حل ڪرڻ

This section addresses common issues you might encounter with your paint spray system.

8. وضاحتون

Technical data for the Scheppach ACS4000 Paint Spray System.

• ماڊل: ACS4000
• شئي ماڊل نمبر: 5906004901
• طاقت: 550 ڊبليو
• وڌ ۾ وڌ ڪم دٻاء: 110 bar (adjustable in 5 levels)
• وڌ ۾ وڌ وڌ جي شرح 1.25 ايل / منٽ
• Surface Performance: Up to 420 m²/h
• نلي جي ڊگھائي: 9 ميٽر
• پيداوار جي ماپ (L x W x H): 34 x 34 x 49 سينٽي
• شيء جو وزن: 8.7 ڪلو
• مواد: پلاسٽڪ يا ڌاتو
• طاقت جو ذريعو: برقي تار
• رنگ: نيرو
• Compliant Specifications: CE
• ٺاهيندڙ: اسڪيپچ
• اصليت جو ملڪ: فرانس

9. وارنٽي ۽ سپورٽ

For warranty claims, technical support, or spare parts inquiries, please contact your retailer or the manufacturer directly. Specific warranty terms and conditions may vary by region and purchase location. Information regarding spare parts availability is not provided in this manual; please consult the manufacturer's official channels for details.