1. اهم حفاظتي ڄاڻ
Please read this manual thoroughly before installation, operation, or maintenance of your Amerec AK6 Steam Unit. Failure to follow these instructions could result in electric shock, fire, serious injury, or property damage. Retain this manual for future reference.
- اليڪٽرڪ شاک خطرناڪ: Disconnect power supply before servicing. All electrical work must be performed by a qualified electrician in accordance with national and local electrical codes.
- احتياط: Hot steam can cause burns. Do not touch the steam outlet directly.
- يونٽ جي مناسب گرائونڊ کي يقيني بڻايو وڃي.
- جيڪڏهن يونٽ خراب ٿي ويو آهي يا خراب ٿي رهيو آهي ته ان کي نه هلايو.
- Keep children and pets away from the steam unit and steam outlet.
2. پراڊڪٽ ختمview
The Amerec AK6 Steam Unit is designed to provide a consistent flow of steam for home steam showers, suitable for rooms ranging from 80 to 150 cubic feet. This unit operates on a 240V electrical supply.

Figure 1: Amerec AK6 Steam Unit. Key components visible include the power entry, water inlet, steam outlet, drain, and pressure relief valve. The unit also displays safety warnings regarding electrical shock and hot steam.
اهم اجزاء:
- پاور داخلا: Connection point for the electrical supply.
- پاڻي داخل ڪرڻ: Connection for the cold water supply.
- اسٽيم آئوٽليٽ: Point where steam exits the unit to the steam head in the shower.
- نيڪال: Connection for draining water from the unit.
- پريشر رليف والو: Safety device to release excess pressure.
- Heating Element Access: Panel for servicing the internal heating elements.
3. تنصيب
Installation must be performed by a qualified professional in accordance with all local and national building and electrical codes.
3.1 سائيٽ جي گهرج
- ڪمري جي ماپ: Suitable for steam rooms between 80 and 150 cubic feet.
- ڇت جي اوچائي: وڌ ۾ وڌ سفارش ڪيل ڇت جي اوچائي 8 فوٽ آهي.
- جڳھ: Install the steam unit in a dry, accessible location, such as a closet, vanity, or attic, within a specified distance from the steam shower.
- وينٽيليشن: يونٽ جي چوڌاري مناسب وينٽيليشن کي يقيني بڻايو وڃي.
3.2 برقي ڪنيڪشن
- The unit requires a dedicated 240V electrical circuit.
- Connect the power supply to the "POWER ENTRY" terminal block as indicated on the unit and in the wiring diagram (refer to separate wiring diagram provided with the unit).
- مناسب گرائونڊنگ کي يقيني بڻايو وڃي.
3.3 پلمبنگ ڪنيڪشن
- پاڻي داخل ڪرڻ: Connect a cold water supply line to the "WATER INLET" port. An isolation valve is recommended.
- اسٽيم آئوٽليٽ: Connect a steam-rated pipe from the "STEAM OUTLET" to the steam head inside the shower enclosure. Ensure the pipe slopes back to the generator to prevent condensation buildup.
- نيڪال: Connect a drain line from the "DRAIN" port to an approved waste receptor.
- پريشر رليف والو: Ensure the pressure relief valve is installed and directed to a safe discharge location.
3.4 Control Installation
- The AK6 unit requires one control for operation. Compatible controls include K2, K3, KT3, and K4.
- Additional controls may be connected if desired.
- Refer to the specific control's installation manual for detailed wiring and mounting instructions.
3.5 Additional Components
- Depending on your configuration, additional steam heads, autodrains, and drip pans may be required. Consult your installer or Amerec documentation for specific requirements.
- This unit can be paired with Amerec Glacier or Amerec Columbia Steam Packages.
4. آپريشن
Once installed and connected, operate the Amerec AK6 Steam Unit using the compatible control panel.
- پاور آن: Ensure the main power supply to the steam unit is switched on.
- Activate Control: Turn on your Amerec control (K2, K3, KT3, or K4) according to its specific instructions.
- درجه حرارت ۽ وقت مقرر ڪريو: Use the control panel to set your desired steam duration and temperature. The unit will begin to heat water and produce steam.
- Enjoy Steam: Allow a few minutes for the steam to fill the shower enclosure.
- بجلي بند: When finished, turn off the steam unit via the control panel. The unit will automatically drain (if an autodrain is installed) or cool down.
Refer to your specific Amerec control manual for detailed operating instructions and advanced features.
5. سار سنڀال
Regular maintenance ensures the longevity and efficient operation of your Amerec AK6 Steam Unit. Always disconnect power before performing any maintenance.
- ڊسڪنگ: Depending on water hardness, the unit may require periodic descaling to remove mineral buildup. Consult Amerec's descaling instructions or a qualified technician.
- نيڪال: Ensure the drain line is clear and free of obstructions. If an autodrain is not installed, manually drain the unit after each use or as recommended to prevent mineral buildup.
- چڪاس: Periodically inspect all connections (electrical and plumbing) for leaks or signs of wear.
- صفائي: Keep the exterior of the unit clean and free of dust.
6. مسئلا حل ڪرڻ
This section addresses common issues you might encounter. For problems not listed here, contact Amerec customer support.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ٻاڦ جي پيداوار ناهي | No power, water supply off, control not activated, heating element failure. | Check circuit breaker, ensure water supply is open, activate control, contact service if heating element is suspected. |
| گھٽ ٻاڦ جي پيداوار | Mineral buildup (scaling), restricted steam line, incorrect room size. | Perform descaling, check steam line for obstructions, verify room size is within specifications. |
| يونٽ مان پاڻي نڪرڻ | Loose plumbing connections, faulty pressure relief valve, internal component failure. | Tighten connections, inspect pressure relief valve, contact service for internal issues. |
| يونٽ چالو ناهي | No electrical power, faulty control, internal fuse blown. | Check power supply and circuit breaker, test control, contact service. |
7. وضاحتون
| ماڊل نمبر | AK6 |
| برانڊ | آمريڪ |
| بجلي جي گهرج | 240V |
| تجويز ڪيل ڪمرو سائيز | 80-150 cubic feet |
| Max. Ceiling Height | 8 فوٽ |
| پيداوار جي ماپ (L x W x H) | 22 x 10.5 x 20 انچ |
| شيءِ جو وزن | 31 پائونڊ |
| مطابقت رکندڙ ڪنٽرول | K2, K3, KT3, K4 |
| يو پي سي | 646028008767 |
| ASIN | B0CM58B8R6 |
8. وارنٽي ۽ سپورٽ
For warranty information, technical support, or service inquiries, please contact Amerec customer service.
- ڪسٽمر سپورٽ: 1-800-363-0251
- ٺاهيندڙ: آمريڪ
- Please have your model number (AK6) and purchase date available when contacting support.





