Anderic DC8-96SG8 Ceiling Fan Receiver Replacement Instruction Manual

1. تعارف

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Anderic DC8-96SG8 Ceiling Fan Receiver. This receiver is designed as a direct replacement for specific 6-speed DC motor ceiling fans that originally utilized a DC8 series receiver. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. پراڊڪٽ ختمview

The Anderic DC8-96SG8 is a high-quality replacement receiver for 6-speed DC motor ceiling fans. It restores all original fan functions, including:

• 6 اسپيڊ فين ڪنٽرول.
• Reverse airflow for seasonal comfort.
• LED light dimming support up to 60W.

The motor output is rated up to 40W, ensuring efficient and consistent performance.

شڪل 1: سامهون view of the Anderic DC8-96SG8 Ceiling Fan Receiver, showing the compact black unit with various colored wires extending from both ends for connection to the fan and power supply.

3. مطابقت

This receiver is designed for specific ceiling fan models. It is compatible with select models from the following brands that originally used a DC8 series receiver:

• مونٽي ڪارلو
• Casa Vieja
• Hampٽون بي

اهم: This product is not universal. It is not compatible with Minka Aire, Hunter, or other proprietary systems. Always confirm your existing receiver is labeled "DC8" خريد ڪرڻ کان اڳasing to ensure a proper match. This receiver will not function in fans that were not originally equipped with a DC8 receiver.

4. پيڪيج مواد

پيڪيج ۾ شامل آهن:

• 1x Anderic DC8-96SG8 Ceiling Fan Receiver

نوٽ: The Anderic DC1 remote control, which is required for operation, is sold separately. If both a transmitter and receiver are needed, consider the Anderic DC1/DC8 Kit for a complete solution.

5. حفاظت جي ڄاڻ

مھرباني ڪري ھيٺين حفاظتي احتياطن تي عمل ڪريو:

• بجلي بند ڪريو: Always turn off power to the ceiling fan at the main circuit breaker before attempting any installation, wiring, or maintenance.
• قابل اليڪٽريشن: For best results and safety, professional installation by a qualified electrician is recommended.
• درست وائرنگ: پڪ ڪريو ته سڀئي وائرنگ ڪنيڪشن محفوظ آهن ۽ مقامي برقي ڪوڊن جي تعميل ڪن ٿا.
• جلدtage: تصديق ڪريو ته پاور سپلائي voltage matches the receiver's requirements (AC 120V/60Hz).
• وزن جي حمايت: Ensure the ceiling fan mounting structure can support the weight of the fan and receiver.

6. سيٽ اپ ۽ تنصيب

6.1. وائرنگ ڊاگرام

شڪل 2: پوئتي view of the Anderic DC8-96SG8 Ceiling Fan Receiver, displaying the wiring diagram and product specifications. The diagram illustrates connections for AC power, fan motor (Moteur 1, 2, 3), and light (For Light).

Refer to the wiring diagram printed on the back of the receiver (Figure 2) and the existing wiring of your ceiling fan for correct connections. The diagram typically shows connections for:

• اي سي ان: Live (L) and Neutral (N) power supply.
• FOR LIGHT: Light fixture connection.
• موٽر: Fan motor connections (often labeled Moteur 1, Moteur 2, Moteur 3 for multi-speed DC motors).
• اينٽيننا: For remote signal reception.

6.2. انسٽاليشن جا مرحلا (عام)

1. پاور ڪنيڪشن: Turn off power to the ceiling fan at the main circuit breaker.
2. Access Receiver: Carefully lower the fan canopy to access the existing receiver and wiring.
3. Remove Old Receiver: Disconnect the old receiver, noting all wire connections. It is advisable to take photos for reference.
4. Install New Receiver: Connect the Anderic DC8-96SG8 receiver according to the wiring diagram (Figure 2) and your fan's specific wiring. Ensure all connections are secure using wire nuts.
5. پوزيشن وصول ڪندڙ: Carefully place the new receiver within the fan canopy, ensuring no wires are pinched.
6. پاور بحال ڪريو: سرڪٽ برڪر تي بجلي بحال ڪريو.

6.3. Pairing with DC1 Remote Control

After installation, the receiver must be paired with an Anderic DC1 remote control (sold separately) to function. The pairing procedure typically involves:

1. پڪ ڪريو ته پنکھي کي بجلي فراهم ڪئي وئي آهي.
2. Within a short timeframe (usually 30-60 seconds) of restoring power, press and hold the "LEARN" or "PAIR" button on your Anderic DC1 remote control. Refer to your DC1 remote's manual for the exact button and procedure.
3. The fan light may blink or the fan may briefly turn on to indicate successful pairing.

If pairing fails, repeat the steps. Ensure the remote has fresh batteries and is within range.

شڪل 3: پاسي view of the Anderic DC8-96SG8 Ceiling Fan Receiver, showing the model number label "DC8-96SG8-L-D" and the antenna wire.

7. آپريٽنگ هدايتون

Once the Anderic DC8-96SG8 receiver is successfully installed and paired with the DC1 remote control, you can operate your ceiling fan using the remote. Functions typically include:

• فين اسپيڊ ڪنٽرول: Adjust between 6 fan speeds.
• فين آن/آف: فين کي آن يا بند ڪريو.
• ريورس ايئر فلو: Change the direction of fan rotation for summer (downward airflow) or winter (upward airflow) operation.
• روشني آن/آف: Turn the fan light on or off.
• روشني گهٽجڻ: Adjust the brightness of compatible LED lights (up to 60W).

Refer to your Anderic DC1 remote control manual for specific button functions and detailed operating instructions.

8. سار سنڀال

The Anderic DC8-96SG8 receiver is designed for long-lasting reliability and requires minimal maintenance.

• صفائي: Ensure the area around the receiver within the fan canopy remains free of dust and debris. Do not use liquid cleaners directly on the receiver.
• ڪوبه استعمال ڪندڙ-خدمت وارو حصو: The receiver contains no user-serviceable parts. Do not attempt to open or repair the unit.
• باقاعده چڪاس: Periodically check the fan's operation to ensure all functions are working correctly.

9. مسئلا حل ڪرڻ

If troubleshooting steps do not resolve the issue, contact Anderic customer support for further assistance.

10. وضاحتون

11. وارنٽي ۽ سپورٽ

For warranty information or technical support, please contact Anderic customer service. Details regarding specific warranty periods and terms are typically provided with the product packaging or on the manufacturer's official webسائيٽ.

Manufacturer: Dan's Electronics Etc., Inc.