1. تعارف
Thank you for choosing the Projecta PJ-AC080-2 12V 8.0A 8-Stage Automatic Battery Charger. This charger is designed for automotive and marine lead acid batteries, offering a fully automatic, spark-free, and polarity-protected charging and maintenance solution. Its advanced 8-stage charging process ensures optimal battery health and longevity. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.
2. اهم حفاظتي ڄاڻ
Please read and understand all safety warnings and instructions before using this battery charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- وينٽيليشن: Always use the charger in a well-ventilated area. Batteries can produce explosive gases.
- Eye and Skin Protection: Wear appropriate eye protection and clothing when working near batteries. Battery acid is corrosive.
- Spark-Free Connections: Ensure connections are made and broken in a spark-free manner. The charger is designed to be spark-free, but caution is always advised.
- قطبيت: مثبت (+) چارجر cl سان ڳنڍيوamp to the positive (+) battery terminal and the negative (-) charger clamp to the negative (-) battery terminal. The charger is polarity protected.
- بجلي بند ڪريو: Always disconnect the AC power from the charger before connecting or disconnecting the battery clamps.
- ٻار ۽ پالتو جانور: چارجر ۽ بيٽري کي ٻارن ۽ پالتو جانورن جي پهچ کان پري رکو.
- خراب ٿيل سامان: چارجر کي هلائڻ نه ڏيو جيڪڏهن اهو ڪنهن به طريقي سان خراب ٿي ويو آهي.
- اندروني استعمال: This charger is designed for indoor use. Do not expose to rain or excessive moisture.
3. پراڊڪٽ ختمview ۽ خاصيتون
Figure 3.1: Projecta 12V 8.0A 8-Stage Automatic Battery Charger with power cord and battery clamps.
اهم خاصيتون:
- مڪمل طور تي خودڪار: Simply connect and forget without the risk of overcharging.
- اٺ ايسtages: Once connected, the charger will do the rest whether you're charging or maintaining the battery to keep it ready for use.
- Spark-Free and Polarity Protected: Safe to use while the battery is still in the vehicle.
- Fused Wiring Harness: Quick connect fused wiring harness for permanent installation (BCWH).
- All Included: Comes with harness, battery clamps, and 9.84 ft (3m) extension cable.
4. دٻي ۾ ڇا آهي
Figure 4.1: All components included with the Projecta Battery Charger.
Your Projecta PJ-AC080-2 Battery Charger package should contain the following items:
- پروجيڪٽا 12V 8.0A 8-Stage Automatic Battery Charger Unit
- بيٽري ڪلamps (Red for Positive, Black for Negative)
- Fused Wiring Harness with Ring Terminals (for permanent installation)
- 9.84 ft (3m) Extension Cable
- استعمال ڪندڙ جو دستياب (ھي دستاويز)
5. سيٽ اپ ۽ ڪنيڪشن
Before connecting the charger, ensure the battery terminals are clean and free of corrosion. Always connect the charger to the battery before plugging it into the AC power outlet.
- بيٽري تيار ڪريو: If the battery is in a vehicle, ensure the vehicle's ignition is off and all accessories are turned off. For marine applications, ensure the vessel is securely moored.
- ڳنڍيو بيٽري Clamps:
- ڳنڍيو ڳاڙهو مثبت (+) بيٽري clamp ڏانهن هاڪاري (+) بيٽري ٽرمينل.
- ڳنڍيو ڪارو ناڪاري (-) بيٽري clamp ڏانهن ناڪاري (-) بيٽري ٽرمينل.
Figure 5.1: Proper connection of the charger to a vehicle battery.
شڪل 5.2: تفصيلي view of the positive (red) and negative (black) battery clamps.
- Optional Fused Wiring Harness: For permanent installation, connect the ring terminals of the fused wiring harness to the battery terminals (red to positive, black to negative). This allows for quick connection/disconnection of the charger unit.
Figure 5.3: The included fused wiring harness for permanent battery connection.
- اي سي پاور سان ڳنڍيو: Once the battery connections are secure, plug the charger's AC power cord into a standard 120V AC wall outlet.
6. آپريٽنگ هدايتون
The Projecta PJ-AC080-2 is a fully automatic 8-stage charger. Once connected to the battery and power, it will automatically detect the battery type and condition, then proceed through the optimal charging cycle.
8-ايسtagاي چارج ڪرڻ جو عمل:
چارجر هڪ جديد 8-s استعمال ڪري ٿوtage charging algorithm to ensure efficient and safe charging, extending battery life. The stages typically include:
- گندگي: Recovers sulphated batteries by applying pulse current.
- نرم شروعات: Gently introduces current to the battery to prevent damage, especially for deeply discharged batteries.
- گهڻي چارج: Charges the battery at its maximum rate (8.0A) until it reaches approximately 80% capacity.
- جذب: Charges the battery at a decreasing current to 100% capacity.
- تجزيو: Tests the battery to determine if it can hold a charge.
- بحالي: Applies a controlled overcharge to recondition and equalize the battery cells (if needed).
- فلوٽ: Maintains the battery at a constant voltage, ready for use.
- نبض جي سار سنڀال: Periodically pulses the battery to keep it optimally charged during long-term storage.
The charger's display will indicate the current voltage and charging status. No manual intervention is required during the charging process.
Disconnecting the Charger:
چارجر کي ختم ڪرڻ لاء:
- وال آئوٽليٽ مان AC پاور ڪنڊ کي ڌار ڪريو.
- Disconnect the negative (-) black clamp بيٽري ٽرمينل کان.
- Disconnect the positive (+) red clamp بيٽري ٽرمينل کان.
7. سار سنڀال
Proper maintenance ensures the longevity and optimal performance of your Projecta battery charger.
- صفائي: Disconnect the charger from all power sources before cleaning. Wipe the casing نرم سان، damp ڪپڙو. استعمال نه ڪريو سخت ڪيميائي يا گھڻائي صاف ڪندڙ.
- ڪيبل جي چڪاس: Regularly inspect the power cord, battery clamps, and all cables for any signs of damage, fraying, or corrosion. Do not use the charger if any cables are damaged.
- اسٽوريج: Store the charger in a cool, dry place when not in use. Keep it away from direct sunlight, excessive heat, and moisture.
- بيٽري ٽرمينل: Ensure battery terminals are clean and free of corrosion before connecting the charger.
8. مسئلا حل ڪرڻ
If you encounter issues with your Projecta battery charger, refer to the following common problems and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Charger does not turn on or display is blank. | No AC power; loose connection; faulty outlet. | Check if the charger is securely plugged into a live AC outlet. Test the outlet with another device. Ensure all connections are firm. |
| Charger connected but not charging (no charging indicator). | Incorrect battery connection (reversed polarity); battery too deeply discharged; faulty battery. | Verify positive (+) and negative (-) connections are correct. The charger has polarity protection, which may prevent operation if reversed. For very deeply discharged batteries, the charger may take time to initiate. If the battery is severely damaged, it may not accept a charge. |
| Charger enters error mode or displays an error code. | Internal fault; short circuit; battery fault. | Disconnect the charger from both AC power and the battery. Wait a few minutes, then reconnect. If the error persists, the charger or battery may be faulty. Consult customer support. |
| چارجر آپريشن دوران گرم ٿي ويندو آهي. | Normal operation; poor ventilation. | It is normal for the charger to get warm during charging. Ensure adequate ventilation around the charger to prevent overheating. If it becomes excessively hot, disconnect immediately. |
9. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | PJ-AC080-2 |
| انٽ واليمtage | 120V AC (Standard US Outlet) |
| اوٽ وولٽtage | 12 وولٽ (DC) |
| موجوده چارج | 8.0 Amps |
| چارج Stages | 8-ايسtage خودڪار |
| بيٽري جا قسم | Lead Acid Batteries (WET, MF, CA/CA, AGM, GEL, EFB, LiFePO4 compatible) |
| پيداوار جي ماپ | 6.61 x 2.99 x 11.26 انچ (16.8 x 7.6 x 28.6 سينٽي) |
| شيءِ جو وزن | 2.48 پائونڊ (1.13 ڪلوگرام) |
| رنگ | ڪارو |
| حفاظتي خاصيتون | Spark-Free, Polarity Protected, Overcharge Protection |
10. وارنٽي ۽ سپورٽ
Projecta products are manufactured to high standards and undergo rigorous quality control. For specific warranty details, please refer to the warranty card included with your product or visit the official Projecta webسائيٽ.
If you require technical assistance, troubleshooting beyond this manual, or have questions regarding your product, please contact Projecta Customer Support. Contact information can typically be found on the Projecta webسائيٽ تي يا پراڊڪٽ پيڪنگنگ تي.
آن لائين وسيلا: For the latest information, FAQs, and product updates, please visit the official Projecta webسائيٽ: www.projecta.com.au (نوٽ: هي هڪ جڳهه وارو آهي) URL، مھرباني ڪري صحيح لاءِ اصل پراڊڪٽ دستاويزن جو حوالو ڏيو webسائيٽ).
