1. تعارف
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your FLEX 24V 1/4-inch Quick Eject Hex Impact Driver. This tool is designed to deliver powerful performance for various fastening applications, featuring multiple speed modes, self-tapping screw modes, and a quick eject collet for efficient bit changes. Please read this manual thoroughly before using the tool to ensure proper handling and to maximize its lifespan.
Figure 1: FLEX 24V Brushless Cordless 1/4-Inch Hex Impact Driver (Tool Only)
This image shows the FLEX 24V Brushless Cordless 1/4-Inch Hex Impact Driver, highlighting its ergonomic design and compact form factor. The tool is depicted without a battery, as it is sold as a tool-only unit.
2. حفاظت جي ڄاڻ
باهه، بجليءَ جي جھٽڪي، ۽ ذاتي زخمن جي خطري کي گهٽائڻ لاءِ بجلي جا اوزار استعمال ڪرڻ وقت هميشه بنيادي حفاظتي احتياطن تي عمل ڪريو. مستقبل جي حوالي لاءِ هي دستورالعمل رکو.
جنرل پاور اوزار حفاظتي ڊيڄاريندڙ:
- ڪم واري علائقي جي حفاظت: پنهنجي ڪم واري علائقي کي صاف ۽ روشن رکو. گندو يا اونداهو علائقو حادثن کي دعوت ڏئي ٿو. بجلي جا اوزار ڌماڪيدار ماحول ۾ نه هلايو، جهڙوڪ ٻرندڙ مائع، گئس، يا مٽي جي موجودگي ۾.
- برقي حفاظت: Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded power tools. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
- ذاتي حفاظت: Always wear eye protection. Use appropriate safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection when necessary. Dress properly; avoid loose clothing or jewelry.
- اوزار استعمال ۽ سنڀال: پاور ٽول کي زور سان نه لڳايو. پنهنجي ايپليڪيشن لاءِ صحيح پاور ٽول استعمال ڪريو. ڪا به ترتيب ڏيڻ، لوازمات تبديل ڪرڻ، يا پاور ٽولز کي ذخيرو ڪرڻ کان اڳ پاور سورس ۽/يا پاور ٽول مان بيٽري پيڪ کي پلگ ڊسڪنيڪٽ ڪريو.
- بيٽري جو اوزار استعمال ۽ سنڀال: صرف ٺاهيندڙ پاران بيان ڪيل چارجر سان ري چارج ڪريو. صرف خاص طور تي مقرر ڪيل بيٽري پيڪ سان پاور ٽولز استعمال ڪريو.
3. جزا ۽ خاصيتون
The FLEX 24V Impact Driver is engineered with advanced features for optimal performance and user control.
- Sensor-Free Brushless Motor: Designed for higher efficiency and power, eliminating friction.
- Unrivaled Power: Delivers up to 2,500 in-lbs of torque for demanding fastening tasks.
- 3 اسپيڊ موڊس: Provides enhanced control, allowing adaptation to various applications.
- Quick Eject Collet: Enables fast, one-handed bit changes for increased efficiency.
- Self-Tapping Screw Modes: Optimized to prevent over-tightening, breaking, or stripping of screws.
- بلٽ ان LED لائٽنگ: بهتر نمائش لاءِ ڪم واري علائقي کي روشن ڪري ٿو.
- FLEX 24V Cross-Compatibility: Fully compatible with all FLEX 24V batteries, chargers, and tools.
Figure 2: Demonstrating Unrivaled Power
This image illustrates the FLEX Impact Driver in use, emphasizing its capability to deliver 2,500 in-lbs of torque. A user is shown holding the tool with a battery attached, driving a fastener.
4. سيٽ اپ
4.1 Battery Installation (Battery and Charger Sold Separately)
- Ensure the tool is turned off and the trigger is locked.
- Align the battery pack with the battery port on the base of the tool.
- بيٽري پيڪ کي پورٽ ۾ سلائڊ ڪريو جيستائين اهو محفوظ طور تي جاءِ تي ڪلڪ نه ڪري.
- هٽائڻ لاءِ، بيٽري رليز بٽڻ کي دٻايو ۽ بيٽري پيڪ کي سلائيڊ ڪريو.
4.2 Bit Insertion and Removal
The Quick Eject Collet allows for rapid bit changes.
- داخل: Pull the quick eject collet forward. Insert the 1/4-inch hex shank bit fully into the chuck. Release the collet to lock the bit in place. Tug on the bit to ensure it is securely seated.
- هٽائڻ: Pull the quick eject collet forward. The bit will spring out for easy removal.
Figure 3: Quick Eject Collet in Action
This image demonstrates the quick eject collet feature of the FLEX Impact Driver, showing a hand operating the collet for rapid bit insertion or removal.
5. آپريٽنگ هدايتون
5.1 پاور آن/آف
- To turn on, depress the trigger switch. The tool's speed is variable based on trigger pressure.
- To turn off, release the trigger switch.
5.2 Selecting Speed Modes
The tool features three speed modes for versatile application control.
Figure 4: 3 Speed Modes Control
This image highlights the control panel on the FLEX Impact Driver, showing the selector for its three distinct speed modes, allowing users to adjust power output for different tasks.
- Use the mode selection button (typically located near the base of the handle) to cycle through the available speed settings (1, 2, 3).
- Select a lower speed for delicate tasks or when starting a fastener, and higher speeds for rapid driving in appropriate materials.
5.3 Using Self-Tapping Screw Modes
These specialized modes prevent over-tightening and stripping of self-tapping screws.
Figure 5: Self-Tapping Screw Modes
This image focuses on the control interface of the FLEX Impact Driver, specifically showing the button or switch used to activate the self-tapping screw modes, designed for precise fastening.
- Activate the self-tapping screw mode via the dedicated button.
- The tool will automatically adjust its torque and speed to prevent damage to the fastener or workpiece once the screw is seated.
5.4 اڳتي/ پوئتي آپريشن
- The forward/reverse selector switch is located above the trigger.
- Push the switch to the left for forward rotation (driving screws).
- Push the switch to the right for reverse rotation (removing screws).
- Center the switch to lock the trigger and prevent accidental starting.
5.5 انٽيگريٽيڊ ايل اي ڊي لائيٽ
The built-in LED light activates when the trigger is pressed, illuminating the work surface.
6. سار سنڀال
Regular maintenance ensures the longevity and optimal performance of your FLEX Impact Driver.
- صفائي: اوزار جي وينٽيليشن جي سوراخن کي صاف ۽ ملبي کان پاڪ رکو. نرم، ڊي استعمال ڪريوamp ٻاهرين صفائي لاءِ ڪپڙو. سخت ڪيميڪل يا رگڙيندڙ صاف ڪندڙ استعمال نه ڪريو.
- اسٽوريج: Store the tool in a dry, secure location, out of reach of children. Remove the battery pack before storage.
- چڪاس: Periodically inspect the tool for any signs of damage, loose screws, or worn parts. If any issues are found, contact FLEX customer support or a qualified service center.
7. مسئلا حل ڪرڻ
This section addresses common issues you might encounter with your FLEX Impact Driver.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| اوزار شروع نٿو ٿئي. | Battery not inserted correctly or discharged. Trigger lock engaged. | Ensure battery is fully seated and charged. Disengage trigger lock. |
| گھٽ طاقت يا رفتار. | Low battery charge. Incorrect speed mode selected. | Recharge battery. Select a higher speed mode. |
| بِٽ محفوظ طور تي نه رهيو آهي. | Bit not fully inserted into collet. Collet mechanism dirty. | Ensure bit is fully inserted and collet is released to lock. Clean collet area. |
| Over-tightening or stripping screws. | Incorrect speed mode or self-tapping mode not engaged. | Select appropriate speed mode or activate self-tapping screw mode for specific applications. |
If the problem persists after attempting these solutions, contact FLEX customer support.
8. وضاحتون
| تفصيل | قدر |
|---|---|
| برانڊ | FLEX |
| ماڊل نمبر | FX1371A-Z |
| طاقت جو ذريعو | بيٽري سان هلندڙ |
| جلدtage | 24 وولٽ |
| وڌ ۾ وڌ گھمڻ واري رفتار | 4000 RPM |
| وڌ ۾ وڌ Torque | 2,500 انچ پائونڊ |
| رفتار جو تعداد | 3 |
| سوراخ جو قسم | اثر ڊرائيور |
| ڪوليٽ جي ماپ | 1/4-Inch Hex |
| شيءِ جو وزن | 1.46 ڪلوگرام (3.21 پائونڊ) |
| پيداوار جي ماپ | 4.7"ليٽر x 4"ڊبليو x 10"ايڇ |
| مواد | پلاسٽڪ |
| شامل اجزاء | Bare tool (Battery and Charger Not Included) |
| يو پي سي | 840163201001 |
9. وارنٽي ۽ سپورٽ
9.1 FLEX محدود لائف ٽائيم وارنٽي
Your FLEX 24V Impact Driver is protected by the FLEX Limited Lifetime Warranty when registered within 30 days of purchase at رجسٽرمائي ايف ايل ايڪس ڊاٽ ڪام through December 31, 2025. This warranty covers tools, batteries, and chargers.
Figure 6: FLEX Lifetime Warranty Details
This image displays information regarding the FLEX Limited Lifetime Warranty, emphasizing the registration requirement within 30 days of purchase to qualify for coverage on tools, batteries, and chargers.
9.2 ڪسٽمر سپورٽ
ٽيڪنيڪل مدد، وارنٽي دعوائن، يا عام پڇا ڳاڇا لاءِ، مھرباني ڪري سرڪاري FLEX جو دورو ڪريو. website or contact their customer support channels. Refer to the product packaging or the FLEX webجديد ترين رابطي جي معلومات لاءِ سائيٽ.
توھان پڻ دورو ڪري سگھو ٿا FLEX Store on Amazon وڌيڪ پراڊڪٽ جي معلومات ۽ لوازمات لاءِ.
