فينٽيڪس ايڪس ٽي پرو مڊ ٽاور گيمنگ چيسس يوزر مينوئل

1. تعارف

Thank you for choosing the Phanteks XT Pro Mid-Tower Gaming Chassis. This manual provides detailed instructions for the assembly, installation, and maintenance of your new PC case. The XT Pro is designed for high airflow performance, featuring a mesh front panel and tempered glass side panel, offering excellent cooling capabilities and a clear view of your internal components. It supports a wide range of hardware, including large graphics cards and extensive cooling solutions.

Figure 1.1: Phanteks XT Pro Mid-Tower Gaming Chassis, showcasing its sleek black design and tempered glass side panel.

2. حفاظت جي ڄاڻ

• Always disconnect the power supply from the wall outlet before performing any installation, cleaning, or maintenance.
• Handle tempered glass panels with care. They are fragile and can shatter if dropped or subjected to impact.
• Avoid exposing the chassis to extreme temperatures, humidity, or direct sunlight.
• Keep small components and screws out of reach of children.
• حساس اليڪٽرانڪ حصن کي اليڪٽرو اسٽيٽڪ ڊسچارج (ESD) نقصان کان بچائڻ لاءِ مناسب گرائونڊنگ کي يقيني بڻايو وڃي.
• Do not attempt to modify the chassis structure or components, as this may void your warranty and pose safety risks.

3. پيڪيج مواد

Please verify that all items listed below are present in your package. If any items are missing or damaged, please contact Phanteks customer support.

• Phanteks XT Pro Mid-Tower Chassis
• لوازمات جو دٻو (اسڪرو، زپ ٽائي، اسٽينڊ آف، وغيره)
• استعمال ڪندڙ جو دستياب (ھي دستاويز)
• (Optional, depending on model) 1x 120mm Fan

4. سيٽ اپ ۽ تنصيب

4.1 چيسس تيار ڪرڻ

Before installing components, remove the side panels. The tempered glass side panel is typically secured with thumbscrews at the rear. The solid steel side panel may also use thumbscrews or a latch mechanism.

شڪل 4.1: View of the Phanteks XT Pro chassis with the tempered glass side panel installed.

Figure 4.2: Rear interior view of the chassis, showing cable management routes and drive mounting locations.

4.2 Motherboard جي انسٽاليشن

Install the necessary motherboard standoffs into the chassis tray according to your motherboard's form factor (ATX, Micro-ATX, Mini-ITX). Carefully place the motherboard onto the standoffs, aligning the screw holes, and secure it with the provided motherboard screws.

شڪل 4.3: اندروني view of the Phanteks XT Pro with a motherboard, CPU cooler, and graphics card installed.

4.3 پاور سپلائي يونٽ (PSU) لائڻ

The PSU mounts at the bottom rear of the chassis. Slide your PSU into the designated bay from the rear and secure it with screws. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards, depending on your cooling preference.

4.4 اسٽوريج ڊرائيو جي انسٽاليشن

The XT Pro supports multiple storage drives.

• 3.5 انچ هارڊ ڊرائيو: Install into the drive cage located under the PSU shroud.
• 2.5 انچ ايس ايس ڊي: Mount to the dedicated SSD brackets behind the motherboard tray.

Figure 4.4: Diagram illustrating the locations for 3.5" HDDs and 2.5" SSDs within the chassis.

4.5 گرافڪس ڪارڊ (GPU) جي انسٽاليشن

Remove the necessary PCIe slot covers at the rear of the chassis. Insert your graphics card into the PCIe slot on the motherboard and secure it with the thumbscrew or latch mechanism. The XT Pro supports large graphics cards without compromise.

4.6 فين ۽ ريڊيٽر جي انسٽاليشن

The XT Pro offers extensive cooling support:

• سامهون: Up to 3x 120mm or 2x 140mm fans.
• مٿي: Up to 3x 120mm or 2x 140mm fans, supporting up to a 360mm radiator.
• پوئتي: 1x 120 ملي ميٽر فين.
• هيٺيون: Up to 2x 120mm fans.

Install fans and radiators using the appropriate screws. Ensure correct airflow direction for optimal cooling.

Figure 4.5: Diagram showing fan and radiator mounting locations and supported sizes (120mm, 140mm, and radiator sizes).

4.7 ڪيبل مينيجمينٽ

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables neatly. This improves airflow and aesthetics. Secure cables with zip ties or Velcro straps.

5. چيسس هلائڻ

5.1 فرنٽ I/O پينل

The front I/O panel is located on the top of the chassis and provides convenient access to essential ports and controls.

• پاور بٽڻ: سسٽم کي آن / بند ڪري ٿو.
• ري سيٽ بٽڻ: سسٽم کي ٻيهر شروع ڪري ٿو.
• USB 3.0 بندرگاهن: تيز رفتار ڊيٽا جي منتقلي لاءِ.
• USB-C 3.0 پورٽ: جديد USB-C ڊوائيسز لاءِ.
• آڊيو جڪس: هيڊ فون ۽ مائڪروفون پورٽ.

شڪل 5.1: بند اپ view of the top I/O panel, indicating the Power Button, Reset Button, USB 3.0, USB-C 3.0, and Audio/Microphone jacks.

6. سار سنڀال

باقاعده سار سنڀال توهان جي پي سي جي اجزاء جي بهترين ڪارڪردگي ۽ ڊگهي عمر کي يقيني بڻائڻ ۾ مدد ڪري ٿي.

• مٽي فلٽر: The XT Pro features an ultra-fine performance mesh front panel and a top dust filter. Regularly clean these filters to maintain optimal airflow. They can typically be removed and cleaned with compressed air or a soft brush.
• ٻاهرين صفائي: ٻاھرين سطحن کي نرم سان صاف ڪريو، ڊيamp ڪپڙو. گھڙڻ وارا صاف ڪندڙ يا محلولن کان پاسو ڪريو.
• اندروني صفائي: Periodically use compressed air to remove dust buildup from internal components like fans, heatsinks, and circuit boards. Ensure the system is powered off and unplugged before cleaning.

7. مسئلا حل ڪرڻ

هي حصو عام مسئلن کي حل ڪري ٿو جيڪي توهان کي منهن ڏئي سگهن ٿا.

• سسٽم آن نه ٿي رهيو آهي:
  • Check all power connections: PSU to wall, PSU to motherboard, and front panel power switch cable to motherboard.
  • Ensure the PSU switch is in the "ON" position.
• ڪابه ڊسپلي آئوٽ پُٽ ناهي:
  • Verify that the monitor cable is securely connected to the graphics card (or motherboard, if using integrated graphics).
  • گرافڪس ڪارڊ ۽ رام ماڊلز کي ٻيهر سيٽ ڪريو.
• وڌيڪ شور
  • Check if any fan cables are obstructing fan blades.
  • Ensure all fans are securely mounted.
  • Clean dust from fans and filters.
• Poor airflow/high temperatures:
  • سڀ ڊسٽ فلٽر ۽ اندروني حصن کي صاف ڪريو.
  • Verify correct fan orientation (intake/exhaust).
  • Ensure no cables are blocking airflow paths.

For further assistance, please refer to the Phanteks support webسائيٽ يا انهن جي ڪسٽمر سروس سان رابطو ڪريو.

8. وضاحتون

شڪل 8.1: طول و عرضview of the Phanteks XT Pro chassis.

9. وارنٽي ۽ سپورٽ

Phanteks products come with a limited warranty. Please refer to the official Phanteks website for the most up-to-date warranty information and terms specific to your region.

For technical support, product registration, or to download the latest drivers and manuals, please visit the official Phanteks support page:www.phanteks.com/support.html

When contacting support, please have your product model number (PH-XT523P1_BK01) and purchase information ready.