PNI GreenHouse SC1800C PRO Solar Inverter User Manual

1. کانview

1.1 پيداوار جي وضاحت

The PNI GreenHouse SC1800C PRO Solar Inverter is a central component for small off-grid solar systems, suitable for areas with or without grid electricity. It provides a continuous output of 3000W with a pure sine wave, making it suitable for various household lighting installations and other small electronic motors, including refrigerators, pumps, tools, and charging devices for phones, laptops, and TVs.

1.2 اهم خاصيتون

• Maximum photovoltaic panel input power: 2000 W.
• وڌ ۾ وڌ ڊي سي ان پٽ حجمtage from photovoltaic panels: 30 - 120 VDC (Vmp).
• Maximum solar charge current: 30 A input from panels, 60 A output to batteries.
• Solar charging efficiency: 98%.
• MPPT solar charger type.
• ريٽيڊ آئوٽ وولٽtage: 230 V.
• Rated output power: 3000 W (under ideal conditions with proportional battery count and 100% charged batteries).
• Maximum apparent power: 6000 VA (peak, 0.5 seconds under ideal conditions).
• volاھر وولٽtage waveform: Pure sine wave.
• Output signal frequency: 50, 60 Hz.
• ان پٽ Voltage: 230 V AC.
• Grid connection for backup.
• Compatible with 24V batteries: AGM, lead-acid, gel, flooded lithium-ion.
• Minimum battery start voltage: 23 V (cold start voltag۽.
• Integrated high-frequency inverter type (switching).
• Inverter efficiency: 90% ~ 93% (100% charged battery).
• Typical transfer time: 10 ms (UPS, VDE) 20 ms (APL).
• Line mode efficiency: > 95% (rated R load, fully charged battery).
• Hybrid operating modes: SBU – Solar/Battery/Utility, Solar Utility (UPS).
• AC charge voltage: 230 V.
• Maximum AC charge current: 30 A.
• Automatic switching: Solar - Batteries - Grid.
• توانائي جي بچت فنڪشن.
• Multiple protections.
• ملٽي فنڪشن ڊسپلي.
• Dedicated menu for advanced settings.
• Monitoring with PC software (USB cable included).
• Remote monitoring from mobile/PC (with optional WiFi USB dongle).

1.3 پيڪيج مواد

• PNI GreenHouse SC1800C PRO Solar Inverter
• USB ڪيبل
• استعمال ڪندڙ دستي
• PNI Smart Dongle-WLAN (for WiFi monitoring)

2. حفاظت جي ڄاڻ

مھرباني ڪري انسٽاليشن ۽ آپريشن کان اڳ سڀ ھدايتون ۽ ڊيڄاريندڙ احتياط سان پڙھو. انھن ھدايتن تي عمل ڪرڻ ۾ ناڪامي بجليءَ جو جھٽڪو، باهه، يا سخت زخمي ٿي سگھي ٿي.

• قابل عملو: تنصيب ۽ سار سنڀال لازمي طور تي قابل عملدار طرفان ڪيو وڃي.
• برقي جھٽڪو جو خطرو: هي ڊوائيس وڏي وولٽ سان ڪم ڪري ٿوtages. Do not open the casing unless specifically instructed.
• بيٽري جي حفاظت: Batteries can produce explosive gases. Ensure proper ventilation. Do not smoke or allow sparks or flames near batteries. Wear eye protection.
• مناسب وائنٽيليشن: Install the inverter in a well-ventilated area to prevent overheating.
• ماحولياتي حالتون: Avoid exposure to rain, snow, spray, or any liquids. Operate within the specified temperature range (-26 °C to 80 °C).
• گرائونڊنگ: پڪ ڪريو ته انورٽر مقامي اليڪٽريڪل ڪوڊس جي مطابق صحيح طرح سان گرائونڊ ٿيل آهي.
• بجلي بند ڪريو: Always disconnect all power sources (solar, battery, AC grid) before performing any wiring or maintenance.

3. پيداوار جا حصا

3.1 PNI GreenHouse SC1800C PRO Solar Inverter

شڪل 3.1: سامهون view of the PNI GreenHouse SC1800C PRO Solar Inverter, showing the display and control buttons.

شڪل 3.2: پوئتي view of the PNI GreenHouse SC1800C PRO Solar Inverter, illustrating the various connection ports for solar panels, batteries, AC input, and AC output.

Figure 3.3: Close-up of the USB connection port on the inverter, used for PC monitoring.

3.2 PNI Smart Dongle-WLAN (Optional)

Figure 3.4: The PNI Smart Dongle-WLAN, an optional accessory for remote WiFi monitoring of the inverter.

Figure 3.5: The PNI Smart Dongle-WLAN connected to the inverter's dedicated port for WiFi communication.

4. تنصيب ۽ سيٽ اپ

4.1 ڀت لڳائڻ

The inverter is designed for wall mounting. Choose a location that is dry, well-ventilated, and protected from direct sunlight and moisture. Ensure sufficient clearance around the unit for proper airflow and heat dissipation. Use appropriate mounting hardware for your wall type.

4.2 سسٽم ڪنيڪشن ڊراگرام

Figure 4.1: Basic application diagram showing the connections between solar panels, utility grid, generator, inverter, battery, and home loads. Note: Generator, PV modules, WiFi module, and battery are not included with the inverter unless specified.

4.3 وائرنگ ڪنيڪشن

Follow the diagram above and the labels on the inverter for correct wiring. Ensure all connections are secure and properly insulated. It is highly recommended that a qualified electrician performs all wiring.

• شمسي پينل ڪنيڪشن: Connect your solar panels to the designated PV input terminals. Observe correct polarity (positive to positive, negative to negative). The maximum DC input voltage 120 VDC آهي.
• بيٽري ڪنيڪشن: Connect the 24V battery bank to the battery terminals. Ensure correct polarity. The inverter supports AGM, lead-acid, gel, and flooded lithium-ion batteries.
• AC Input (Grid/Generator): Connect the AC utility grid or a generator to the AC input terminals. This provides backup power and can charge batteries.
• AC Output (Loads): Connect your household loads to the AC output terminals.

4.4 شروعاتي پاور اپ

After all connections are made and verified:

1. بيٽري بريڪر آن ڪريو.
2. Turn on the solar panel breaker (if applicable).
3. AC ان پٽ بريڪر کي آن ڪريو (جيڪڏهن گرڊ/جنريٽر سان ڳنڍيل هجي).
4. Turn on the inverter's power switch.
5. Observe the display for status indicators and initial readings.

5. آپريٽنگ موڊس

The PNI GreenHouse SC1800C PRO offers intelligent energy management with several configurable operating modes:

• Solar Priority Mode (SBU): In this mode, the inverter prioritizes power consumption from solar energy. If solar power is insufficient, it will draw from batteries. The utility grid acts as a backup.
• بيٽري ترجيحي موڊ: The inverter prioritizes drawing power from the batteries. Solar energy will charge the batteries. The utility grid is used only when battery voltage drops below a set threshold.
• Utility Priority Mode (UPS): This mode prioritizes power from the utility grid. Solar energy will charge the batteries. The inverter switches to battery power only when the grid is unavailable, functioning as an Uninterruptible Power Supply (UPS).

These modes can be configured via the inverter's multifunction display and dedicated menu for advanced settings.

5.1 مانيٽرنگ

The inverter supports monitoring through:

• PC Software (USB): Connect the inverter to a PC using the provided USB cable and dedicated software for detailed monitoring and analysis of parameters.
• Remote Monitoring (WiFi - Optional): With the optional PNI Smart Dongle-WLAN, you can monitor the inverter remotely via a mobile application or web انٽرفيس.

6. سار سنڀال

Regular maintenance ensures optimal performance and longevity of your inverter. Always disconnect all power sources before performing any maintenance.

• صفائي: وقت بوقت انورٽر جي ٻاهرين حصي کي سڪل ڪپڙي سان صاف ڪريو. پڪ ڪريو ته وينٽيليشن جا سوراخ مٽي ۽ ملبي کان پاڪ آهن. مائع ڪلينر استعمال نه ڪريو.
• ڪنيڪشن چيڪ: Annually inspect all wiring connections (solar, battery, AC input/output) for tightness and signs of corrosion. Tighten any loose connections.
• بيٽري جي چڪاس: If using lead-acid batteries, check electrolyte levels and terminal condition as per battery manufacturer guidelines.
• ماحولياتي چڪاس: پڪ ڪريو ته انسٽاليشن جو ماحول مخصوص درجه حرارت ۽ نمي جي حدن اندر رهي.

7. مسئلا حل ڪرڻ

هي حصو عام مسئلن لاءِ هدايت فراهم ڪري ٿو. پيچيده مسئلن لاءِ، قابل سروس اهلڪارن سان رابطو ڪريو.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

وارنٽي جي معلومات ۽ ٽيڪنيڪل سپورٽ لاءِ، مھرباني ڪري پنھنجي خريداري سان گڏ ڏنل دستاويز ڏسو يا پنھنجي پرچون ڪندڙ سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.