efperfect Modern 3 Lights Glass Pendant Light Instruction Manual

تعارف

خريد ڪرڻ لاءِ مهربانيasing the efperfect Modern 3 Lights Glass Pendant Light, model EF1408736001. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

This pendant light features three distinct smoky gray glass lampshades, designed to enhance various indoor spaces with a blend of modern and vintage aesthetics.

Figure 1: The efperfect Modern 3 Lights Glass Pendant Light, showcasing its design in a bright room.

Figure 2: The pendant light enhancing a dining room setting.

Figure 3: The pendant light providing illumination in a bedroom.

حفاظت جي ڄاڻ

• خبردار: To avoid electric shock, always disconnect power at the main circuit breaker or fuse box before installation or servicing.
• سڀئي بجلي جا ڪنيڪشن مقامي ڪوڊ، آرڊيننس، يا نيشنل اليڪٽرڪ ڪوڊ (NEC) جي مطابق هجڻ گهرجن. جيڪڏهن توهان بجلي جي وائرنگ کان ناواقف آهيو ته هڪ قابل اليڪٽريشن سان صلاح ڪريو.
• Ensure the fixture is securely mounted to a structural component of the ceiling.
• وڌ ۾ وڌ وات کان وڌيڪ نه ڪريوtage بلب لاءِ مخصوص ڪيو ويو آهي.
• ٽٽڻ کان بچڻ لاءِ شيشي جي حصن کي احتياط سان سنڀاليو.
• هي سامان صرف اندروني استعمال لاء ٺهيل آهي.

پيڪيج مواد

انسٽاليشن سان اڳتي وڌڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن ۽ انهن کي ڪو نقصان نه پهتو آهي.

• Ceiling Canopy with integrated wiring
• 3 گلاس ايلampshades (various shapes and sizes)
• Mounting Hardware (crossbar, mounting screws, wire connectors)
• Adjustable Hanging Wires (pre-attached to canopy and lamp هولڊرز)
• ھدايت وارو دستور

Note: E26 light bulbs are not included and must be purchased separately.

وضاحتون

سيٽ اپ ۽ تنصيب

پيشيورانه انسٽاليشن جي سفارش ڪئي وئي آهي. اڳتي وڌڻ کان اڳ پڪ ڪريو ته سرڪٽ بريڪر تي بجلي بند آهي.

1. تنصيب لاءِ تيار ڪريو

• Turn off electricity at the main fuse box or circuit breaker.
• احتياط سان سڀني حصن کي کوليو ۽ ڪنهن به نقصان جي چڪاس ڪريو.
• Gather necessary tools (screwdriver, wire strippers, electrical tape, ladder).

2. Mount the Crossbar

Attach the mounting crossbar to the junction box in your ceiling using the provided screws. Ensure it is securely fastened.

Figure 4: Installation diagram illustrating the mounting process and electrical connections.

3. تار ڪنيڪشن

• Connect the fixture's ground wire (usually bare copper or green) to the house ground wire.
• Connect the fixture's neutral wire (usually white) to the house neutral wire (white).
• Connect the fixture's live wire (usually black) to the house live wire (black).
• Secure all connections with wire connectors and wrap with electrical tape for added safety.

شڪل 5: تفصيلي view of the ceiling canopy and wiring points before final installation.

4. Secure the Ceiling Canopy

Carefully tuck all wires into the junction box. Align the ceiling canopy with the mounting screws on the crossbar and secure it with the provided decorative nuts or screws.

5. Adjust Hanging Wires

The hanging wires for each glass globe are adjustable. To adjust the length, gently push the small pin on the canopy where the wire enters, then pull or push the wire to the desired length. Release the pin to lock the wire in place. Ensure the wires are taut and the globes hang evenly or as desired.

Figure 6: The three distinct glass shades with adjustable hanging wires, allowing for customized arrangement.

6. لائيٽ بلب لڳايو

هر هڪ ايل ۾ E26 بيس بلب (شامل نه آهن) اسڪرو ڪريوamp holder. Ensure bulbs are fully seated. The fixture supports incandescent, LED, CFL, and halogen bulbs up to 60W each. For dimming functionality, use dimmable E26 bulbs and a compatible dimmer switch (not included).

Figure 7: Detail of an E26 bulb correctly installed within a glass shade.

7. Attach Glass Shades

Carefully attach each glass lampshade to its respective lamp holder according to the design. Ensure they are securely fastened but do not overtighten.

Figure 8: The efperfect pendant light installed, demonstrating its aesthetic appeal in a living space.

آپريٽنگ هدايتون

• آن/بند ڪرڻ: Once installed and power is restored, operate the light fixture using your wall switch.
• گھٽائڻ جي ڪارڪردگي: If you have installed dimmable E26 bulbs and a compatible dimmer switch, you can adjust the light intensity by using the dimmer switch.

Figure 9: Visual representation of the dimmable feature and potential light color temperatures when using compatible bulbs.

سار سنڀال

• صفائي: Disconnect power before cleaning. Wipe the fixture and glass shades with a soft, dry, or slightly damp ڪپڙو. گھڙڻ وارا صاف ڪندڙ يا محلول استعمال نه ڪريو، ڇاڪاڻ ته اهي ختم يا شيشي کي نقصان پهچائي سگهن ٿا.
• بلب مٽائڻ: Ensure power is off. Allow bulbs to cool completely before attempting to replace them. Unscrew the old bulb and screw in a new E26 bulb of the appropriate wattage (max 60W).

مشڪلاتون

وارنٽي ڄاڻ

efperfect offers a 60-day return service for any damaged or defective product. Additionally, free replacement is provided for any non-working or broken part within five years of purchase. Please retain your proof of purchase for warranty claims.

ڪسٽمر سپورٽ

If you encounter any issues or have questions regarding your efperfect Modern 3 Lights Glass Pendant Light, please contact our customer support team. We aim to respond to inquiries within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official efperfect store online.

Thank you for choosing efperfect.