1. تعارف
Thank you for choosing the EazeID D210S Label Maker. This portable device is designed for efficient and versatile labeling, suitable for various environments including home, office, and school. Featuring a user-friendly QWERTY keyboard and dual power options, it produces durable, laminated labels resistant to water, abrasion, fading, and temperature changes.
This manual provides detailed instructions on how to set up, operate, and maintain your label maker to ensure optimal performance and longevity.
2. سيٽ اپ
2.1. پيڪيج مواد
شروع ڪرڻ کان اڳ، مھرباني ڪري پڪ ڪريو ته سڀئي شيون توھان جي پيڪيج ۾ موجود آھن:
- EazeID D210S Gray label maker (1 unit)
- Sample label tape waterproof (12mm 0.47 laminated White, 4M) (1 unit)
- Type-C Cable (1 unit)
- يوزر مينوئل (1 يونٽ)
Image: Contents of the EazeID D210S Label Maker package, including the device, sample tape, Type-C cable, and manual.
2.2. ڊوائيس کي طاقت ڏيڻ
The EazeID D210S label maker offers two power options:
- USB قسم-سي ڪيبل: Connect the included Type-C cable to the label maker and a compatible power adapter (not included). The device does not support charging via Type-C; it operates directly from the power source.
- AAA بيٽريون: For portable use, insert 6 AAA batteries (not included) into the battery compartment located on the underside of the device. Ensure correct polarity.
نوٽ:
- It is recommended to use a charger block with an output voltage of ±5V when using the Type-C cable.
- Do not leave batteries in the printer when it is powered by the USB Type-C cable.
Image: Illustration of the label maker's dual power options: USB Type-C for continuous power and AAA batteries for portability.
2.3. ليبل ٽيپ لڳائڻ
To install the label tape:
- Open the tape compartment cover on the back of the label maker.
- Insert the label tape cassette with the tape facing the print head. Ensure the tape is properly aligned and clicks into place.
- ٽيپ جي ڪمپارٽمينٽ جي ڍڪ کي محفوظ طور تي بند ڪريو.
Image: The label maker with its tape compartment open, illustrating the tape installation area and the integrated cutter.
3. آپريٽنگ هدايتون
3.1. بنيادي ليبل ٺاهڻ
Follow these steps to create a basic label:
- پاور آن: ليبل ٺاهيندڙ کي چالو ڪرڻ لاءِ پاور بٽڻ کي دٻايو.
- ڪي بورڊ ان پٽ: Use the QWERTY keyboard to type your desired text. The text will appear on the LCD screen.
- ڇپائي: کي دٻايو ڇپائي ليبل پرنٽ ڪرڻ لاءِ بٽڻ دٻايو.
Image: A visual guide demonstrating the simple three-step process to operate the label maker.
3.2. Text Formatting and Special Functions
The D210S label maker includes a variety of built-in functions to customize your labels:
- فونٽ جا انداز: Access 16 font styles using the dedicated فونٽ چاٻي
- نشان: Choose from over 640 symbols using the علامت چاٻي
- فريم: Apply over 100 frames to your labels using the فريم چاٻي
- ٻيا افعال: Utilize keys for Size, Width, Barcode, History, Mirror, and more for advanced customization.
Image: The label maker showcasing its extensive library of frames, symbols, and font options for creative labeling.
3.3. Printing Multiple Labels
The D210S offers efficient options for printing multiple labels:
- Multi-Copy Editing: Use the multi-copy editing one-touch key to continuously edit and print up to 55 different labels. This is ideal for creating a series of unique labels without re-entering the menu.
- Printing Identical Labels: To print multiple copies of the same label, it is advisable to print them all at once and then cut them individually. You can specify the number of copies (1-9) by pressing شفٽ + ڇپائي, then using the navigation keys or a number key, and finally pressing OK or ڇپائي.
Image: A flowchart demonstrating how to use the multi-copy function for sequential label printing.
Image: A guide on how to efficiently print multiple identical labels using the Shift + Print key combination.
3.4. Clearing Text
To clear text or formatting:
- Delete Letters One by One: کي دٻايو بي ايس (بيڪ اسپيس) چاٻي
- Delete All Text and Format: دٻايو پڌرو → OK → [Text & Format] → OK.
- Delete Text Only: دٻايو پڌرو → [صرف متن] → OK.
Image: A step-by-step guide on using the Clear function to remove text or formatting from the label maker's display.
3.5. Using the Built-in Cutter
After printing, use the integrated cutter to cleanly separate your label from the tape roll. The cutter is located on the side of the device. Press the cutter lever firmly to cut the label.
3.6. Optimizing Label Tape Usage
To reduce label tape costs, it is recommended to set the label margin to "Narrow" in the device settings. Navigate to سيٽنگون → مارجن → تنگ.
Image: A visual comparison highlighting the tape-saving benefit of using the 'Narrow' margin setting on the D210S.
4. سار سنڀال
4.1. صفائي
To ensure optimal performance and print quality, regularly clean your label maker:
- ڊوائيس جي ٻاهرئين حصي کي نرم، سڪل ڪپڙي سان صاف ڪريو.
- If the print head becomes dirty, gently wipe it with a cotton swab dampened with isopropyl alcohol. Ensure the device is turned off and disconnected from power before cleaning.
- Remove any dust or debris from the tape compartment.
4.2. Tape Replacement
When the label tape runs out or you wish to change tape types, follow the tape installation instructions in Section 2.3. Ensure you use compatible EazeID D210S label tapes for best results.
4.3. اسٽوريج
Store the label maker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the AAA batteries to prevent leakage.
5. مسئلا حل ڪرڻ
If you encounter issues with your EazeID D210S Label Maker, refer to the following common problems and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ڊوائيس تي طاقت نه آهي | Low or dead batteries; USB cable not connected properly; incorrect power adapter. | Replace AAA batteries; ensure USB Type-C cable is securely connected; use a compatible 5V power adapter. |
| Poor print quality (faint, blurry, or missing lines) | Dirty print head; incorrect tape installation; low tape quality. | Clean the print head (see Section 4.1); re-install label tape correctly; ensure you are using genuine EazeID D210S compatible tape. |
| Tape jams frequently | Improper tape installation; foreign objects in tape path; tape not feeding smoothly. | Re-install tape, ensuring it is seated correctly; check for and remove any obstructions; ensure tape is not creased or damaged. |
| ليبل صحيح طرح نه ڪٽجي رهيو آهي | Cutter blade dull or obstructed. | Ensure no tape residue is blocking the cutter; if issues persist, contact customer support. |
| اسڪرين تي غلطي پيغام | مخصوص غلطي جي حالت. | Refer to the on-screen message for guidance. Common errors relate to tape issues (e.g., "Tape End"). Follow instructions or re-install tape. |
6. وضاحتون
| ماڊل نالو | D210S Gray Label Maker Machine |
| برانڊ | ايزي آئي ڊي |
| ڇپائي ٽيڪنالاجي | حرارتي |
| رابطي ٽيڪنالاجي | ڪي بورڊ |
| وڌ ۾ وڌ ميڊيا سائيز | 12mm |
| وڌ ۾ وڌ رنگ پرنٽ ريزوليوشن | 180 ڊي پي آئي |
| وڌ ۾ وڌ ڪارو ۽ اڇو پرنٽ ريزوليوشن | 203 ڊي پي آئي |
| بجلي جي فراهمي | Type-C Cable or 6 AAA Batteries |
| پيداوار جي ماپ | 5 x 5 x 2 انچ |
| شيءِ جو وزن | 1.26 پائونڊ |
| شامل اجزاء | Label maker, Sample label tape, Type-C Cable, User Manual |
| في رن وڌ ۾ وڌ ڪاپيون | 55 (different labels) |
7. وارنٽي ۽ سپورٽ
7.1. وارنٽي ڄاڻ
The EazeID D210S Label Maker comes with a limited warranty. Please refer to the warranty card included in your package or visit the official EazeID webوارنٽي ڪوريج ۽ مدت بابت تفصيلي شرطن ۽ ضابطن لاءِ سائيٽ.
7.2. ڪسٽمر سپورٽ
For technical assistance, troubleshooting not covered in this manual, or inquiries about replacement parts and accessories, please contact EazeID customer support. Contact information can typically be found on the EazeID official webسائيٽ تي يا پراڊڪٽ پيڪنگنگ تي.
8. پراڊڪٽ وڊيوز
هن دستور ۾ شامل ڪرڻ لاءِ مهيا ڪيل ڊيٽا ۾ وڪرو ڪندڙ کان ڪا به سرڪاري پراڊڪٽ وڊيو نه ملي.
