1. تعارف
This manual provides comprehensive instructions for the safe and effective use of your Mastfuyi FY8861 Wood Moisture Meter. This portable, pen-style device is designed for quick and accurate measurement of moisture content in wood and various building materials, and also includes ambient temperature measurement. Please read this manual thoroughly before operation and retain it for future reference.
2. پراڊڪٽ ختمview
The Mastfuyi FY8861 is a compact and lightweight moisture meter, ideal for professionals and DIY enthusiasts. Its ergonomic design ensures comfortable handling and portability.
Image 2.1: Mastfuyi FY8861 Wood Moisture Meter with protective cap and included AAA batteries.
اهم خاصيتون:
- Portable Pen Design: Weighs approximately 1.83 ounces (52g) without batteries, making it easy to carry.
- High-Precision Pins: Equipped with two durable 303 stainless steel pins for accurate readings.
- ٻٽي ماپ جا طريقا: Dedicated modes for wood and building materials.
- Ambient Temperature Measurement: Measures temperature in Celsius or Fahrenheit.
- MAX/MIN Value Freeze Function: Records peak moisture data during measurement.
- استعمال ڪندڙ-دوست خاصيتون: Automatic power-off after 5 minutes of inactivity and a battery indicator.
Image 2.2: The compact and portable pen-style design of the Mastfuyi FY8861, highlighting its dimensions and light weight.
3. سيٽ اپ
3.1. بيٽري لڳائڻ
- Locate the battery compartment cover, typically on the back or side of the device.
- Carefully remove the cover. Some models may require unscrewing a small screw or sliding a latch.
- Insert two AAA 1.5V batteries, ensuring correct polarity (+/-) as indicated inside the compartment. Note: Some users report difficulty inserting batteries due to spring tension; gentle but firm pressure may be required.
- بيٽري جي ڪمري واري ڍڪ کي محفوظ طور تي تبديل ڪريو.
3.2. پاور آن/آف
- ڊوائيس تي طاقت ڪرڻ لاء، دٻايو پاور بٽڻ (
). The display will illuminate. - بيٽري جي زندگي بچائڻ لاءِ ڊوائيس 5 منٽن جي غير فعال ٿيڻ کان پوءِ خود بخود بند ٿي ويندي.
- To manually power off, press and hold the پاور بٽڻ.
4. آپريٽنگ هدايتون
4.1. Selecting Measurement Modes
The Mastfuyi FY8861 offers two moisture measurement modes and an ambient temperature measurement mode. Use the SEL بٽڻ to cycle through these modes.
- Mode A (Wood Moisture Measurement):
When the device is powered on, it typically defaults to Mode A. The indicator light will be ڳاڙهو. This mode is suitable for measuring moisture in various types of wood, from hardwood to softwood. The measurement range is 0% to 40%.Image 4.1: Device display showing Mode A for wood moisture measurement with a red indicator light.
- Mode B (Building Material Moisture Measurement):
کي دٻايو SEL بٽڻ once to switch to Mode B. The indicator light will be سائو. This mode is designed for measuring moisture in building materials such as concrete and drywall. The measurement range is 0% to 40%.
Image 4.2: Device display showing Mode B for building material moisture measurement with a green indicator light.
- Ambient Temperature Measurement:
کي دٻايو SEL بٽڻ again to switch to ambient temperature measurement. In this mode, the indicator light will be off. You can toggle between Celsius (°C) and Fahrenheit (°F) by pressing the SEL بٽڻ هڪ ڀيرو وڌيڪ.
Image 4.3: Device displaying ambient temperature, with options to switch between Celsius and Fahrenheit.
4.2. ماپڻ
- ماپ جي پنن مان حفاظتي ڪيپ کي هٽايو.
- Select the appropriate measurement mode (Wood or Building Material) using the SEL بٽڻ.
- Firmly insert the two measurement pins into the material you wish to test. For best results, push the pins deep enough to ensure good contact with the material.
- Read the moisture content percentage اسڪرين تي ڏيکاريل آهي.
- After measurement, carefully withdraw the pins and replace the protective cap.
4.3. MAX/MIN Value Freeze Function
The MAX/MIN function is useful for recording the highest or lowest moisture reading during a measurement session, especially when testing materials with varying moisture levels at different depths.
- ماپ دوران، دٻايو وڌ MAX بٽڻ to toggle between displaying the maximum, minimum, or current reading.
- This allows you to capture peak data without continuously monitoring the display.
Image 4.4: Device display illustrating the MAX/MIN hold function, showing recorded maximum and minimum moisture values.
5. سار سنڀال
5.1. صفائي
- After each use, wipe the measurement pins with a clean, dry cloth to remove any residue.
- Clean the device body with a soft, damp ڪپڙو. استعمال نه ڪريو abrasive cleaners يا solvents.
- Ensure the device is completely dry before storage.
5.2. اسٽوريج
- Always replace the protective cap over the measurement pins when not in use to prevent damage and injury.
- ڊوائيس کي ٿڌي، سڪل جاءِ تي، سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري رکو.
- جيڪڏهن گهڻي عرصي تائين ذخيرو ڪري رهيا آهيو، ته پوءِ ليڪيج کي روڪڻ لاءِ بيٽريون هٽايو.
6. مسئلا حل ڪرڻ
6.1. No Reading or "Lo" Display
- سبب: If the material (e.g., wood board) is extremely dry, it acts as an insulator, preventing electrical conductivity between the two pins.
- حل: Ensure the material is not excessively dry. For accurate readings, the pins must make good electrical contact. Push the pins deep into the material. If the material is genuinely very dry, a "Lo" reading or no reading is expected and indicates low moisture.
6.2. غلط پڙهڻيون
- Check Pin Contact: Ensure both pins are fully inserted and making firm contact with the material.
- Select Correct Mode: Verify that you are using the correct mode (Wood or Building Material) for the material being tested.
- بيٽري جي سطح: A low battery can affect accuracy. Replace batteries if the battery indicator is low.
- ماحولياتي عنصر: Extreme humidity or temperature can sometimes influence readings. Allow the device to acclimate to the environment.
6.3. ڊوائيس پاور آن نٿو ٿئي
- بيٽري چيڪ ڪريو: Ensure batteries are correctly installed with proper polarity and are not depleted. Replace with fresh AAA batteries if necessary.
- بيٽري جو خانو: Confirm the battery compartment cover is securely closed.
7. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | مالي سال 8861 |
| Measurement Range (Wood) | 0% کان 40% |
| Measurement Range (Building Materials) | 0% کان 40% |
| قرارداد | 0.1% |
| درستگي | ±2% |
| Ambient درجه حرارت جي حد | 0~50°C / 14~122°F |
| طاقت جو ذريعو | 2 x AAA 1.5V Batteries (not included, but often supplied) |
| خودڪار پاور آف | 5 منٽن جي غير فعال ٿيڻ کان پوء |
| شيءِ جو وزن | 3.2 آونس (تقريبن 90 گرام) |
| پيڪيج جي ماپ | 7.09 x 1.61 x 1.38 انچ |
| ٺاهيندڙ | مستفيو |
8. وارنٽي ۽ سپورٽ
8.1. وارنٽي ڄاڻ
مستفوئي هڪ مهيا ڪري ٿو 48 مهينن جي غير مشروط وارنٽي for the FY8861 Wood Moisture Meter. This warranty covers manufacturing defects and ensures product reliability.
8.2. سيلز کان پوءِ جي خدمت ۽ مدد
We are committed to providing excellent customer service. Mastfuyi offers زندگي بھر سيلز کان پوءِ جي خدمت for this product. If you have any questions, encounter issues, or require assistance, our 24/7 online after-sales service team is available to help you as soon as possible.
For further support or to explore other Mastfuyi products, please visit the official Mastfuyi Store.
