WOLFBOX 3000A Portable Car Jump Starter User Manual

1. تعارف

Thank you for choosing the WOLFBOX 3000A Portable Car Jump Starter. This device is designed to provide a reliable and powerful solution for starting vehicles with dead batteries, as well as serving as a portable power bank and emergency light source. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your product.

2. حفاظت جي ڄاڻ

WARNING: Read all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• ٻارن جي پهچ کان پري رکو.
• Do not immerse the product in water or expose it to rain.
• پيداوار کي ڌماڪي واري ماحول ۾ نه هلايو، جهڙوڪ ٻرندڙ مائع، گيس، يا مٽي جي موجودگي ۾.
• جمپ نه ڪريو ھڪڙي frozenميل بيٽري شروع ڪريو.
• صحيح پولارٽي ڪنيڪشن کي يقيني بڻايو (ڳاڙهو ڪلوamp مثبت ڏانهن، ڪارو clamp to negative) to avoid sparks and damage.
• مثبت ۽ منفي cl کي ڳنڍڻ نه ڏيوampگڏ آهي.
• If the product is damaged, do not use it. Contact customer service for assistance.
• Use only the provided jumper cables and accessories.
• Do not leave the jump starter connected to the vehicle battery after starting the vehicle.

Image: The WOLFBOX 3000A Jump Starter features a 10-Point Safety System, providing comprehensive protection against various electrical hazards during operation.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون توهان جي پيڪيج ۾ موجود آهن:

• WOLFBOX 3000A Jump Starter (MegaVolt16)
• Smart Jumper Cables with Battery Clamps
• USB-C کان USB-C چارجنگ ڪيبل
• ايوا کڻڻ وارو ڪيس
• استعمال ڪندڙ دستي

Image: All components included in the WOLFBOX 3000A Jump Starter package.

4. پراڊڪٽ ختمview

Familiarize yourself with the different parts of your WOLFBOX 3000A Jump Starter:

تصوير: سامهون view of the WOLFBOX 3000A Jump Starter.

Image: Integrated Versatility - Key features and ports of the WOLFBOX 3000A Jump Starter.

• LCD اسڪرين: ڏيکاري ٿو بيٽري جو سيڪڙوtage, input/output status, and error messages.
• پاور بٽڻ: Turns the device on/off and cycles through LED light modes.
• بوسٽ بٽڻ: Activates boost mode for severely discharged batteries.
• LED ٽارچ: Provides illumination with multiple modes (lighting, SOS, strobe).
• PD65W USB-C In/Out Port: جمپ اسٽارٽر کي چارج ڪرڻ ۽ ٻين ڊوائيسز کي چارج ڪرڻ لاءِ.
• QC3.0 USB-A پورٽ: For charging other electronic devices.
• Jumper Cable Socket: سمارٽ جمپر ڪيبلز سان ڳنڍي ٿو.

5. جمپ اسٽارٽر کي چارج ڪرڻ

Before first use, fully charge the WOLFBOX 3000A Jump Starter. It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, even if not in use.

1. Connect the provided USB-C to USB-C charging cable to the PD65W USB-C In/Out port on the jump starter.
2. Connect the other end of the USB-C cable to a 65W (or higher) USB-C power adapter (not included).
3. The LCD screen will display the charging status and battery percentage. The unit is fully charged when the screen shows 100%.

Note: A 65W fast charger can charge the jump starter to 80% in approximately 30 minutes.

Image: The jump starter's 65W USB-C port can quickly charge the unit itself or other electronic devices.

6. آپريٽنگ هدايتون

6.1. Jump Starting a Vehicle (Normal Mode)

گاڏي کي جمپ اسٽارٽ ڪرڻ جي ڪوشش ڪرڻ کان اڳ پڪ ڪريو ته جمپ اسٽارٽر گهٽ ۾ گهٽ 50٪ چارج ٿيل آهي.

1. پنهنجي گاڏي جي اگنيشن ۽ سڀني لوازمات (هيڊ لائيٽس، ريڊيو، وغيره) کي بند ڪريو.
2. Connect the blue end of the smart jumper cables to the jumper cable socket on the WOLFBOX 3000A Jump Starter. Ensure a firm connection.
3. ڳنڍيو red (+) clamp to the positive terminal of your vehicle's battery.
4. ڳنڍيو black (-) clamp توهان جي گاڏي جي بيٽري جي منفي ٽرمينل ڏانهن.
5. Once connected, the jump starter's LCD screen should display "START" with a green light, indicating a correct connection and readiness to start.
6. پنهنجي گاڏي جي انجن شروع ڪريو.
7. Once the vehicle starts, immediately remove the jumper cables in reverse order: first the black (-) clamp، پوءِ ڳاڙهو (+) clamp, and finally disconnect the blue end from the jump starter.

Image: Normal Start Modes - Step-by-step guide for jump starting a vehicle.

6.2. Jump Starting a Vehicle (Boost Mode)

Use Boost Mode if your vehicle's battery is severely discharged (below 9V) and the jump starter does not automatically display "START" in normal mode.

1. Follow steps 1-4 from the Normal Jump Start procedure (connect clamps to battery and jump starter).
2. If the screen displays "LOW" or does not show "START", press and hold the بوٽ بٽڻ on the jump starter for 2-3 seconds until the screen displays "START" with a green light.
3. Start your vehicle's engine within 30 seconds.
4. Once the vehicle starts, immediately remove the jumper cables in reverse order: first the black (-) clamp، پوءِ ڳاڙهو (+) clamp, and finally disconnect the blue end from the jump starter.

Image: Boost Start Modes - Step-by-step guide for jump starting a vehicle with a severely discharged battery.

6.3. ايل اي ڊي ٽارچ استعمال ڪندي

The integrated LED flashlight has three modes: constant light, SOS signal, and strobe light.

1. کي دٻايو ۽ رکو پاور بٽڻ for 3 seconds to turn on the flashlight (constant light mode).
2. Press the Power button once to cycle to SOS mode.
3. Press the Power button again to cycle to strobe mode.
4. Press the Power button a third time to turn off the flashlight.

Image: The 200-Lumen LED Flashlight provides illumination and emergency signaling.

6.4. پورٽيبل پاور بينڪ طور استعمال ڪرڻ

The WOLFBOX 3000A can charge various electronic devices via its USB ports.

• Connect your device's charging cable to either the PD65W USB-C Out port or the QC3.0 USB-A port on the jump starter.
• The jump starter will automatically begin charging your device. The LCD screen will indicate "OUT" status.
• چارجنگ مڪمل ٿيڻ کان پوءِ پنهنجي ڊوائيس کي ڊسڪنيڪٽ ڪريو.

7. سار سنڀال

Proper maintenance ensures the longevity and performance of your jump starter.

• اسٽوريج: جمپ اسٽارٽر کي سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري ٿڌي، سڪل جاءِ تي رکو.
• ري چارجنگ: Recharge the unit every 3-6 months, even if not used, to maintain battery health. A fully charged unit can hold its charge for up to two years under moderate conditions.
• صفائي: Use a dry, soft cloth to clean the exterior of the unit. Do not use harsh chemicals or abrasives.
• ڪيبل جي سنڀال: Inspect jumper cables for any damage before each use. Store them neatly in the carrying case.

Image: The WOLFBOX 3000A Jump Starter features a 2-year standby capability, requiring periodic recharging for optimal performance.

8. مسئلا حل ڪرڻ

Image: The large screen display provides clear status indicators for easy troubleshooting.

9. وضاحتون

10. وارنٽي ۽ ڪسٽمر سپورٽ

WOLFBOX provides a comprehensive warranty and dedicated customer support for your product.

• وارنٽي مدت: خريداري جي تاريخ کان 24 مهينا.
• ڪوريج: This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or natural disasters.
• ڪسٽمر سروس: For any questions, issues, or warranty claims, please contact WOLFBOX customer service.
• اي ميل: service@wolfbox.com
• فون: +1 888 296 8399

Please have your purchase receipt and product model number (MegaVolt16) ready when contacting support.