1. تعارف
Welcome and thank you for choosing the TELLUR Portable Jump Starter. This device is designed to provide emergency jump-starting for vehicles, act as a portable power bank for electronic devices, and offer illumination with its integrated LED light. Please read this manual carefully before use to ensure safe and optimal operation of your device.
2. اهم حفاظتي ڄاڻ
To prevent personal injury or damage to your vehicle and the jump starter, always observe the following safety precautions:
- هن پراڊڪٽ کي استعمال ڪرڻ کان پهريان سڀ هدايتون پڙهو.
- جمپر ڪل کي شارٽ سرڪٽ نه ڪريوamps. Ensure positive (+) and negative (-) clampهڪ ٻئي کي نه ڇُهندا آهن.
- ڊوائيس کي ٻارن کان پري رکو.
- Do not disassemble the jump starter. Unauthorized repairs can be dangerous and will void the warranty.
- ڊوائيس کي چڱي طرح هوادار علائقي ۾ استعمال ڪريو.
- Avoid exposing the device to extreme temperatures (above 60°C/140°F or below -20°C/-4°F), direct sunlight, or moisture.
- جمپر ڪل کي يقيني بڻايوamps are securely connected to the correct battery terminals before attempting to jump start.
- جيڪڏهن بيٽري clamps are connected incorrectly, the device's safety features will prevent operation. Correct the connection immediately.
- Do not use the jump starter if it is damaged or leaking.
- Only use the provided smart jumper cables with this device.
3. پيڪيج مواد
پڪ ڪريو ته سڀئي شيون توهان جي پيڪيج ۾ موجود آهن:
- TELLUR Portable Jump Starter Unit
- سمارٽ جمپر ڪيبل
- USB-A کان USB-C چارجنگ ڪيبل
- کڻڻ وارو ٿلهو
Image 3.1: Contents of the TELLUR Portable Jump Starter package, showing the main unit, smart jumper cables, a USB charging cable, and a black carrying pouch with the TELLUR logo.
4. پراڊڪٽ ختمview
4.1 اجزاء
- جمپ اسٽارٽ پورٽ: سمارٽ جمپر ڪيبلز کي ڳنڍڻ لاءِ.
- USB Output Ports (QC 3.0, 5.0V 2.4A): اليڪٽرانڪ ڊوائيسز کي چارج ڪرڻ لاءِ.
- USB-C ان پٽ پورٽ: جمپ اسٽارٽر يونٽ کي چارج ڪرڻ لاءِ.
- LED لائيٽ: ڪيترن ئي طريقن سان روشني فراهم ڪري ٿو.
- پاور بٽڻ: To turn the device on/off and cycle LED light modes.
- LCD ڊسپلي: ڏيکاري ٿو بيٽري جو سيڪڙوtage and operational status.
تصوير 4.1: تفصيلي view of the various ports on the side of the TELLUR Jump Starter, including the covered jump start port, USB-A output ports, and a USB-C input port.
Image 4.2: The front of the TELLUR Jump Starter, displaying a digital screen indicating 100% charge, 'IN' and 'OUT' indicators, and 'QC 3.0 5.0V 2.4A' specifications. The smart jumper cables are attached.
5. سيٽ اپ
5.1 جمپ اسٽارٽر کي چارج ڪرڻ
Before first use, fully charge the TELLUR Portable Jump Starter. It is recommended to fully charge the device every 3-6 months to maintain battery health, even when not in use.
- Connect the provided USB-A to USB-C charging cable to the USB-C input port on the jump starter.
- USB ڪيبل جي ٻئي ڇيڙي کي هڪ مناسب USB پاور اڊاپٽر (شامل نه آهي) يا هڪ طاقتور USB پورٽ سان ڳنڍيو.
- The LCD display will show the charging progress. Charge until the display indicates 100%.
6. آپريٽنگ هدايتون
6.1 ٽپو شروع ڪندي گاڏي
گاڏي کي جمپ اسٽارٽ ڪرڻ جي ڪوشش ڪرڻ کان اڳ پڪ ڪريو ته جمپ اسٽارٽر گهٽ ۾ گهٽ 50٪ چارج ٿيل آهي.
- Turn off your vehicle's ignition and all accessories.
- Insert the smart jumper cable connector into the jump start port on the jump starter unit. Ensure it is fully seated.
- ڳنڍيو ڳاڙهو مثبت (+) ڪلamp گاڏي جي مثبت (+) بيٽري ٽرمينل ڏانهن.
- ڳنڍيو ڪارو ناڪاري (-) ڪلوamp گاڏي جي منفي (-) بيٽري ٽرمينل ڏانهن.
- Once connected, the smart cable indicator light will show green if the connection is correct and safe to proceed. If it shows red or flashes, check the connections.
- Start your vehicle's engine. If it doesn't start immediately, wait 30 seconds and try again. Do not crank for more than 3 seconds per attempt.
- هڪ دفعو گاڏي شروع ٿئي، فوري طور تي ڊسڪنيڪٽ ڪريو ڪارو ناڪاري (-) ڪلوamp پهريون ، پوءِ ڳاڙهو مثبت (+) ڪلamp.
- Remove the smart jumper cable connector from the jump starter unit.
Image 6.1: A user connecting the red positive clamp of the smart jumper cables to the positive terminal of a car battery, with the TELLUR Jump Starter unit visible.
Image 6.2: The TELLUR Jump Starter unit with its display illuminated, placed on the ground next to a car, illustrating its use in an emergency jump-start scenario.
6.2 پاور بينڪ طور استعمال ڪرڻ
جمپ اسٽارٽر پنهنجي USB آئوٽ پُٽ پورٽ ذريعي مختلف اليڪٽرانڪ ڊوائيسز کي چارج ڪري سگهي ٿو.
- پنهنجي ڊوائيس جي USB چارجنگ ڪيبل کي جمپ اسٽارٽر تي USB آئوٽ پُٽ پورٽن مان هڪ سان ڳنڍيو.
- The jump starter will automatically begin charging your device. The LCD display may show 'OUT' indicating power output.
- چارجنگ مڪمل ٿيڻ کان پوءِ پنهنجي ڊوائيس کي ڊسڪنيڪٽ ڪريو.
Image 6.3: The TELLUR Jump Starter unit positioned between a smartphone and a tablet, demonstrating its capability to charge multiple devices as a power bank.
6.3 LED لائيٽ استعمال ڪندي
مربوط ايل اي ڊي لائيٽ مختلف حالتن لاءِ روشني فراهم ڪري ٿي.
- Press and hold the Power Button for 3 seconds to turn on the LED light (steady mode).
- Press the Power Button again to cycle through the light modes: Steady > Strobe > SOS > Off.
- To turn off the light directly from any mode, press and hold the Power Button for 3 seconds.
Image 6.4: The TELLUR Jump Starter unit with its powerful LED light activated, providing illumination within a car's engine compartment, useful for nighttime repairs or jump-starting.
7. سار سنڀال
Proper maintenance ensures the longevity and performance of your jump starter.
- صفائي: سڪل، نرم ڪپڙي سان ڊوائيس کي صاف ڪريو. سخت ڪيميڪل يا رگڙيندڙ مواد استعمال نه ڪريو.
- اسٽوريج: Store the jump starter in its carrying pouch in a cool, dry place, away from direct sunlight and moisture. The ideal storage temperature is between 0°C (32°F) and 45°C (113°F).
- ري چارجنگ: Recharge the unit every 3-6 months, even if not used, to maintain the internal battery's health and readiness.
8. مسئلا حل ڪرڻ
If you encounter issues with your TELLUR Portable Jump Starter, refer to the table below for common problems and solutions.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| جمپ اسٽارٽر آن نٿو ٿئي. | بيٽري مڪمل طور تي ختم ٿي وئي آهي. | جمپ اسٽارٽر کي مڪمل طور تي چارج ڪريو. |
| گاڏي جمپ اسٽارٽ ڪرڻ کان پوءِ شروع نه ٿيندي آهي. | غلط ڪلamp connection; vehicle battery is severely damaged; vehicle has other mechanical issues. | چيڪ ڪريو clamp connections (ensure correct polarity). Ensure jump starter is sufficiently charged. If issues persist, consult a mechanic. |
| Smart cable indicator light is red or flashing. | Reverse polarity connection; short circuit; low voltage. | ڪنيڪٽ ڪريو clamps and reconnect with correct polarity. Ensure clamps are not touching. Charge the jump starter. |
| Electronic device not charging from USB ports. | Jump starter battery is low; faulty USB cable; device not compatible. | Charge the jump starter. Try a different USB cable. Ensure your device is compatible with USB charging. |
9. وضاحتون
| پيرا ميٽر | قدر |
|---|---|
| برانڊ | TELLUR |
| ماڊل | ٽي ايل 158431 |
| بيٽري جي گنجائش | 16800 mAh |
| موجوده چوٽي | 1500 اي |
| جلدtage | 3.7 وولٽ |
| گاڏين جي سروس جو قسم | ڪار |
| شيءِ جو وزن | 500 گرام |
| طول و عرض (L x W x H) | 18 x 7 x 3 سينٽي |
| بيٽري جي جوڙجڪ | ليتيم-پوليمر |
| يو ايس بي آئوٽ | QC 3.0, 5.0V 2.4A |
10. وارنٽي ۽ سپورٽ
The TELLUR Portable Jump Starter TLL158431 comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, warranty claims, or further assistance, please contact TELLUR customer service through the retailer where the product was purchased or visit the official TELLUR webرابطي جي معلومات لاء سائيٽ.
